Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

机构设计在大型柱面网壳结构施工中的应用

 将机械行业中的机构运动概念应用到大型柱面网壳结构的施工，提出一种“折叠展开式”整体提升施工技
术． 详细阐述了该项施工方法的基本思想，并推导机构运动过程的运动学和动力学公式． 通过一个工程算例的分
析，总结机构运动和动力特性．计算结果证明机构运动过程中产生的动力效应不明显，处于“折叠”状态的网壳能够
承受施工荷载．该项新技术在亚洲最大跨度的柱面网壳结构的施工中得到了成功应用，证明了它的实用性和优越性．     

氧气顶吹转炉吹炼过程动态模型

通过炉气流量和成分的在线采样信息，用积分法计算熔池排出碳量，并根据熔炼体系中碳的守恒，动态推算熔池含碳量，由此来预报吹炼终点。较深入研究了提高炉气流量检测精度的方法，如心平衡修正和钢液成分反馈修正等，并采用了滤波算法，这些措施有利于提高动态模型的精度。     

Increasing the precision of a device used to determine the dynamic coefficient of friction

A theoretical evaluation of the potential application of a device with inclined plane for determining the dynamic coefficient of friction is given. Structural changes in the device that make it possible to increase its precision are proposed. Computational equations for estimating the resolution of the device are presented. __________ Translated from Izmeritel’naya Tekhnika, No. 11, pp. 24–26, November, 2007.     

A polynomial dynamic system approach to software design for attractivity requirement

Because of the widespread increasing application of Web services and autonomic computing, self-adaptive software is an area gaining increasing importance. Control theory provides a theoretical foundation for self-adaptive software. In this paper, we propose the use of the supervisory control theory of discrete event dynamic systems (DEDS) to provide a rigorous foundation for designing software for reactive systems. This paper focuses in particular on design of software with an attractivity requirement. It studies this problem using the polynomial dynamic system (PDS) model of DEDS. A necessary and sufficient condition for software existence and two algorithms for such software design are presented.     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

Dynamic averaging and foraging decisions in horses (Equus callabus).

The variability of most environments taxes foraging decisions by increasing the uncertainty of the information available. One solution to the problem is to use dynamic averaging, as do some granivores and carnivores. Arguably, the same strategy could be useful for grazing herbivores, even though their food renews and is more homogeneously distributed. Horses (Equus callabus) were given choices between variable patches after short or long delays. When patch information was current, horses returned to the patch that was recently best, whereas those without current information matched choices to the long-term average values of the patches. These results demonstrate that a grazing species uses dynamic averaging and indicate that, like granivores and carnivores, they can use temporal weighting to optimize foraging decisions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

基于GPS的高层建筑环境激励动态特性研究及应用

本文结合重庆大学主教学楼工程实例,对GPS技术在环境激励下的动态特性进行监控的情况进行了分析和论述。研究结果表明,在高层建筑施工中,应用GPS技术进行建筑物环境激励动态特性监控是一种行之有效的方法。     

南桐矿区龙潭煤系热演化及煤变质研究

川东地区二叠系龙潭煤系煤变质分带与褶皱关系密切，背斜部位变质浅，向斜部位变质深，且变化急剧．在对南桐矿区重点研究的基础上，用沉积速率比值法和沉积趋势法恢复了川东地区各时期的沉积厚度以及褶皱运动前后龙潭煤系的热演化史，并用Ｈｏｏｄ法确定了煤变质阶段，对川东的煤变质规律作出了合理的解释。