转子叶片在非均匀来流条件下的流体激振特性

该文通过研究得出非均匀来流对转子叶片流体激振的三个重要特征 :非均匀来流相对于转子叶片的非定常流中主频分量是产生叶片动应力的决定因素 ;非均匀来流的非均匀度 (相当于非定常流的波幅 )大小和叶片流体激振的动应力大小成正比 ;转子叶片流体的定常压力水平与叶片动应力的水平密切相关。图 4表 2     

泡沫铝的动态压缩性能和吸能性研究

通过测量泡沫铝在动态和准静态压缩条件下的应力 -应变曲线 ,研究了泡沫铝的准静态和动态压缩行为以及不同应变条件下的吸能性 ,并对其应变率效应进行了分析。结果表明 ,在高应变速率和准静态压缩下 ,泡沫铝的σ -ε曲线均表现出弹性变形段、平缓段和密实段三阶段特征 ;泡沫铝的压缩性能具有明显的应变速率敏感性 ,随应变速率的提高 ,流动应力上升 ,吸能性升高     

基桩反射波法动测曲线的数值模拟与特征分析

采用美国PDI公司开发的PDI-S软件,对不同缺陷基桩的反射波法低应变动测曲线进行数值模拟,对动测曲线的特征进行归纳与总结,以便在解释反射波法曲线时作为参考与借鉴,提高基桩质量检测的可靠度。     

同心筒发射中旁泄流影响的数值研究

同心筒是一种先进的新型的舰载导弹垂直发射装置。文中采用动网格技术模拟了导弹在同心式发射筒内发射的瞬态过程。探讨了发射过程中旁泄流的产生与消失原因。通过设计内外筒的合理大小可以有效减弱旁泄流的影响。通过大量的数值实验,给出了避免外筒发生雍塞的代数关系式。     

Development,construction, and use of pneumometric tubes for measurement of steam flow in the steam lines of PVG-1000 at NPP

A system for the direct measurement of steam flow in steam lines after a steam generator, which utilizes a special design of pneumometric tubes and a computing unit that accounts for variation in steam pressure, has been developed to improve the quality of water-level regulation in the steam generators of VVéR-1000 power-generating units in the stationary and transitional modes. The advantage of the pneumometric tubes consists in their structural simplicity, high erosion resistance, and absence of irrevocable losses during measurement of steam flow. A similar measurement system is used at foreign NPP. The measurement system in question has been placed in experimental service at the No. 3 unit of the Balakovo NPP, and has demonstrated its worthiness. This measurement system can also be used to determine steam flow in the steam lines of NPP units with VVéR-1000 and VVéR-440 reactors, and PBMK-1000 power-generating units. __________ Translated from élektricheskie Stantsii, No. 3, March 2007, pp. 23–26.     

Multi-plant production scheduling in SMEs

Traditionally, companies used to view themselves as separate entities and did not devote efforts to collaborate with other echelons of the extended enterprise. This even happened at multi-site companies owning different plants that belonged to the same supply chain. However, manufacturing facilities of the same supply chain should intensively share information and coordinate planning and scheduling tasks in order to get a globally optimized solution. This paper discusses some specific characteristics of the planning and scheduling problem in the extended enterprise including an analysis of a case study, and reviews the available state-of-the-art research studies in this field. Most studies suggest that integrated approaches can have a significant impact on the system performance, in terms of lower production costs, and less inventory levels. The paper provides some conclusions and suggestions of future works.     

龙开口水电站溢流坝段动力模型破坏试验研究

采用仿真混凝土材料研究了龙开口水电站溢流坝段在不同因素影响下的动力破坏特征,并通过对6个模型试验结果的分析探讨了溢流坝段的动力破坏机理。试验中考虑了坝体-库水的动力相互作用以及横河向地震动对大坝破坏的影响,采用规范谱波和场地谱波两种地震动激励进行模型超载破坏分析。试验结果为工程设计和评价溢流坝段的抗震性能提供依据。     

提速列车作用下上承式钢板梁受迫振动实验研究

本文通过对京哈线下行大清河桥第9孔33.6m上承式钢板梁桥的现场实验结果的分析，以测试孔跨中实测横、竖向振幅为依据，较为详尽地研究了在提速列车作用下桥梁的自身的动力特性及其在提速列车作用下的动力响应，给出了在不同列车运行速度、不同列车编组情况下桥梁横、竖向振幅以及一阶受迫振动频率的变化关系，并对桥梁在列车通过时的桥梁的振动形态、结构的薄弱点及其加固方向进行了初步的探讨。     

泥岩压实动态分析法定量评价石油初次运移

在分析影响油气初次运移主要因素的基础上，剖析应用泥岩压实静态分析方法研究油气初次运移的局限性，提出应用泥岩压实动态分析方法定量评价油气初次运移的观点，并建立了相应的地质模型、数学模型和模拟流程。以栓辽盆地乾长凹陷为例，对主要烃源层青山口组进行压实动态分析，并估算其油气初次运移量，计算结果与其它多种方法计算结果以及前人计算结果十分接近。     

利用电阻场板提高SOI-LIGBT的性能

通过在SOI-LIGBT中引入电阻场板和一个p-MOSFET结构,IGBT的性能得以大幅提高.p-MOSFET的栅信号由电阻场板分压得到.在IGBT关断过程中,p-MOSFET将被开启,作为阳极短路结构起作用,从而使漂移区的过剩载流子迅速消失,IGBT快速关断.而且由于电场受到电阻场板的影响,使得过剩载流子能沿着一个更宽的通道流过漂移区,几乎消去了普通SOI-LIGBT由于衬偏造成的关断的第二阶段.这两个因素使得新结构的关断时间大大减少.在IGBT的开启状态,由于p-MOSFET不导通,因此器件的开启特性几乎与普通器件一致.模拟结果表明,新结构至少能增加25%的耐压,减少65%的关断时间.