图象中心加权中值滤波的改进与应用

中心加权中值滤波具有较好的边缘保持特性及快速实现的特点，但滤噪能力低于其它中值滤波。此文探 讨对中心加权中值滤波的改进方法，提出了中心加权分级实现的思想，使之同时具有边缘保持、快速滤波和噪声去 除的理想效果。     

眼球的自动定位

提出了一种由粗到细自动定位人脸的一个重要特征即眼球圆心的方法，该方法综合运用局部二值化，霍夫变换，像纱聚类，边缘提取等技术，对均匀或非均匀光照下拍摄或戴眼镜的照片都能获得很高的定位精度，适用于处理证件照。     

Edge detection,three-dimensional cell boundary reconstruction and volume and surface area estimation from differential interference contrast images

Three-dimensional (3-D) cell morphology is important for the understanding of cell function and can by quantified in terms of volume and surface area. Differential interference contrast (DIC, or Nomarski) imaging can enable cell edges to be clearly visualized in unstained tissue due to the slight difference in refractive index between aqueous media and cytoplasm. DIC is affected in only one direction - the direction of the optical shear. A 1-D edge detector was used in that direction with a scale length equal to that of an in-focus edge to highlight cell boundaries. By comparison with the signal from the edge detector on an out-of-focus slice, the in-focus slices could be segmented and, after noise suppression, cell outlines obtained. A voxel paradigm was used to calculate cell volume and differential geometry was used for surface area estimation. We applied this approach to obtain 3-D dimensional information by optical sectioning of motile Amoeba proteus.     

导向钻井系统在多目标大井斜定向井中的应用

详细介绍了C-D井在钻进过程中井眼轨迹的控制过程,总结了在C-D井中使用导向钻井系统的成功经验。用1根导向马达、2套钻具组合、3只牙轮钻头顺利地完成了定向、增斜、稳斜及降斜,7个目标点一次击中,且最小靶心距仅0.99m。用15d完成了这口斜深2287.09m、井斜58.40°、水平位移903.11m的多目标定向井,钻穿目标点之多、实钻井眼剖面符合率之高、施工难度之大、速度之快,在目前国内都处于领先地位。     

焊接波浪状边缘薄钢带的高上山成型法

介绍了高上山成型法的工艺特点及理论上的可行性和实践中的可靠性，此方法能有效地解决薄钢带波浪状边缘的焊接方面存在的问题。     

从数据结构角度设计导游系统

从数据结构角度为旅游胜地设计导游系统。向游人提供景点的信息查询服务,根据指定的景点提供相关的景点信息。任意给定起点和终点,查询两点之间的最短路径。     

A tolerant approach to reconstruct topology from unorganized trimmed surfaces

Presented in this paper is a topology reconstruction algorithm from a set of unorganized trimmed surfaces. Error-prone small geometric elements are handled to give proper topological information. It gives complete topology to topologically complete models, and it is also tolerant to incomplete models. The proposed algorithm is vertex-based in that clues for topological information are searched from the set of vertices first, not from that of edges.     

弱导光纤的标量衍射光束特性分析

仿照罗兰圆光学系统构造罗兰球光学系统 ,在罗兰球中简化电磁波的瑞利 索末菲标量衍射积分公式 ,推导出折射率阶跃分布的弱导光纤LP模衍射场分布和空间频谱的计算公式。提出LP0 1模远场衍射分布存在类似于平面波圆孔夫琅禾费衍射艾里斑的中央亮斑概念 ,并给出中央亮斑角半宽度的计算公式。     

靶场测量雷达新一代引导接收机

介绍了靶场测量雷达新一代引导接收机。它是一种模拟／数字混合型锁相接收机，可对ＵＳＢ（ＵｎｉｆｙＳ－Ｂａｎｄ）信号进行谱线识别和谱线跟踪，其捕捉范围和跟踪范围可达±１８０ｋＨｚ。它能提供目标角误差信号、目标强度信息和目标速度信息。     

分形方法用于有噪图像边缘检测的研究

本文研究了加性高斯白噪声对于基于离散分数布朗随机场模型图像分形维数估计的影响，并将分形方法用于图像边缘检测，指出在加性高斯白噪声的情况下，分形方法用于图像边缘检测较之经典的基于梯度运算的边缘检测方法有好的抗噪性能，同时又能检测比较丰富的图像边缘细节。