弹性外墙乳胶漆耐沾污性的研究进展

分析了弹性乳胶漆涂膜污染的机理,并提出提高涂膜耐沾污性的措施.     

The effect of supercooling on crystallization of cocoa butter-vegetable oil blends

The solid fat content (SFC), Avrami index (n), crystallization rate (z), fractal dimension (D), and the pre-exponential term [log(γ)] were determined in blends of cocoa butter (CB) with canola oil or soybean oil crystallized at temperatures (T _Cr) between 9.5 and 13.5°C. The relationship of these parameters with the elasticity (G′) and yield stress (σ^*) values of the crystallized blends was investigated, considering the equilibrium melting temperature (T _M ^o) and the supercooling (i.e., T _Cr ^o−T _M ^o) present in the blends. In general, supercooling was higher in the CB/soybean oil blend [T _M ^o=65.8°C (±3.0°C)] than in the CB/canola oil blend [T _M ^o=33.7°C (±4.9°C)]. Therefore, under similar T _Cr values, higher SFC and z values (P<0.05) were obtained with the CB/soybean oil blend. However, independent of T _Cr TAG followed a spherulitic crystal growth mechanism in both blends. Supercooling calculated with melting temperatures from DSC thermograms explained the SFC and z behavior just within each blend. However, supercooling calculated with T _M ^o explained both the SFC and z behavior within each blend and between the blends. Thus, independent of the blend used, SFC described the behavior of G′_eq and σ^* and pointed out the presence of two supercooling regions. In the lower supercooling region, G′_eq and σ^* decreased as SFC increased between 20 and 23%. In this region, the crystal network structures were formed by a mixture of small β′ crystals and large β crystals. In contrast, in the higher supercooling region (24 to 27% SFC), G′_eq and σ^* had a direct relationship with SFC, and the crystal network structure was formed mainly by small β′ crystals. However, we could not find a particular relationship that described the overall behavior of G′_eq and σ^* as a function of D and independent of the system investigated.     

高温下具有弹性支座钢构件的动力稳定荷载

根据弹性稳定理论原理研究了弹性支座钢构件在高温环境下的动力特性问题,导出了高温下杆件的动力稳定临界荷载计算式,并讨论了保护层厚度、长细比、阻尼、材料特性等因素对杆件动力稳定临界荷载的影响,探讨了在实际工程中如何减小结构失稳的问题,可为钢结构抗火设计提供参考.     

弹性介质中框架结构的有限元计算分析(英文)

文章提出了一种考虑剪切变形,由经典弯杆理论发展形成的在弹性介质中框架结构的有限元计算方法.     

高速滚珠丝杠副弹性变形的有限元分析

对于高速滚珠丝杠副,考虑螺旋升角的影响,建立了滚珠丝杠副的受力模型,利用有限元方法分析计算了螺旋升角对滚珠丝杠副弹性变形的影响.结果表明,随着螺旋升角的增大,滚珠丝杠副的法向弹性变形量变化不大,而轴向弹性变形量减少,更有利于提高定位精度.     

钢板剪力墙的分类及性能

对钢板剪力墙结构进行分类讨论,分析了墙板本身的力学性能、使用性能以及与框架的相互作用;探讨了内嵌钢板与框架栓接或焊接的典型连接方式,并从制作安装、使用性能和对墙板性能的影响3个方面比较了栓接与焊接的优劣;分析了各类钢板剪力墙的特点和适用范围,为设计人员在工程应用中选择恰当的钢板剪力墙类型提供了参考。     

地基弹性反力与板式基础共同工作的精确算法

推导了一种精确的地基弹性反力与板式基础共同工作的计算方法.本方法引入了地基弹性反力刚度矩阵的概念,与传统的计算方法相比理论上具有更高的精度.结合具体算例,将本算法和传统算法的结果进行对比表明,这一新算法是有效的,且将对更加精确地计算基础变形起到积极作用.     

基于Matlab的展茅流域圩区防洪排涝分析

基于Matlab强大的数学计算功能与友好的界面,针对舟山市普陀区展茅流域进行防洪排涝分析,选择最不利外海潮位和内河水位组合,采用圩区排涝水文模拟法,并利用Matlab软件所提供的三次样条函数拟合、二元散乱点上的插值等工具编程实现了计算．实例说明了该方法应用的有效性．结果表明,该方法计算过程简单,可供工程设计和施工参考．