Semi—IPN复合材料的弹性性能和内耗的超声测定

本文用超声浸液法测量了单向纤维增强热塑性树脂及其半互穿聚合物网络(Semi-IPN)复合材料的杨氏模量、剪切模量、泊松比和内耗,并对不同树脂、纤维和Semi-IPN中共混组成比对弹性性能的影响进行了研究。     

弹性直杆热膨胀状态下的非线性振动

以ＫＢＭ法为基础，引进谐波平衡观点来研究弹性直杆热膨胀状态下的非线性振动．通过实例计算表明，弹性直杆热膨胀状态下非线性振动的频率对温度的变化非常敏感．     

泡沫沥青混合料动态性能研究

为更好地模拟泡沫沥青混合料在车辆动载作用下的动态性能，便于与国外相关研究进行比较，采用劈裂法对混合料动态性能进行研究。通过试验研究骨料类型、级配、水泥用量等对泡沫沥青混合料动态回弹模量的影响，总结了泡沫沥青混合料动静模量的关系。     

铁铝酸盐复合膨胀水泥化学预应力机理及其应用研究

本文阐述铁铝酸盐自应力混凝土的主要物理力学特征.研究了限制膨胀应变与配筋率之间的定量函数关系.通过正交试验和方差分析,确定了复合外加剂对其性能的影响.针对其在自应力管中的应用,提出多层中空圆柱理论计算模型,按弹性理论计算出自应力管初始应力分布规律.对比以前的线性理论计算误差,给出相应的修正系数.本文对类似的自应力混凝土,具有普遍的指导意义.     

Void formation and growth in a class of compressible solids

A new class of compressible elastic solids, which includes the Blatz-Ko material as a special case, is proposed. A closed-form solution is constructed and studied for a bifurcation problem modeling void formation in this class of compressible elastic solids. The relation between the void-formation condition and the material parameters is obtained analytically. An energy comparison of the void-formation deformation and the homogeneous expansion deformation is carried out.     

大型活塞式压缩机弹性隔振基础的设计及安装

大型活塞式压缩机基础转速较低,传统上采用固定大块体结构,不仅基础的体积和重量都很大,而且动力计算模型也比较复杂,设计参数具有不确定性。而弹簧隔振基础结构边界条件简单清晰,解除了设备、基础块与下部结构的刚性动态耦合,受力明确,构造简单,可靠性和准确度高;隔振效率高达80%以上,能大大降低设备本身和对下部结构的动力作用。文章结合胜利油田油气集输总厂一工程实例,从结构型式、隔振原理、物理参数、动力分析几方面介绍了弹性隔振基础的设计,并简要介绍了弹性隔振基础的安装要点。     

桩土物理模型及结构—桩—土相互作用

本文将工程中常用的密集打桩土体模拟为正交各向异性弹性体。建立了刚性基础-桩-土这一空间相互作用系统的模型。根据圆柱体柱坐标的极点条件。分别选取了两组位移函数来表征桩基和土的位移,并用子区间法分析了结构-桩-土系统的相互作用地震反应。     

Prediction of the elastic behaviour of hybrid and non-hybrid woven composites

A micromechanical model called MESOTEX is presented for prediction of the elastic behaviour of composites reinforced with non-hybrid weave (plain weave, satin weave and twill weave) and hybrid weave (hybrid plain weave and hybrid twill weave) fabrics. By using the classical thin laminate theory applied to each woven structure, this analytical model takes into account the strand undulations in the two directions and also integrates the geometrical and mechanical parameters of each constituent (resin, fill and warp strands). A representative volume is chosen for each woven composite and the fibre architecture is described by several functions. To determine the effectiveness of this analysis, the elastic properties predicted for each woven composite are compared with experimental results and results extracted from the literature. This correlation shows excellent agreement between measured and predicted values, with a very low calculation cost (CPU time of less than 0·01 s).     

Robust pole assignment for incomplete nonlinear decoupling applied to robots

A robustness analysis and synthesis for incomplete nonlinear decoupling for a class of nonlinear systems is discussed. Rigid and elastic-joint robot models belong to this class. For the elastic case, a transformation facilitates the robustness analysis under a weak assumption. Charts with H ₁- and H - norms of closed-loop disturbance transfer functions of the nonlinear-decoupled system are presented for a robust pole assignment.     

保持几何特征的自适应弹性二次曲线模型

物体形状特征的准确提取往往受到图像获取、目标分割等过程中各种因素的影响,因而需要构造一种鲁棒的形状表现来保有其本质特征。揭示弹性二次曲线(EQW)模型中能量权重因子和样条重叠度因子与形状几何特性间的关系,提出一种自适应保持几何特征的EQW形状表现模型,并将该模型与交互式Live Wire算法相结合,应用至图像分割中,对于各种模态图像中的目标进行分割实验。直观上,本文方法能够在去除噪声同时较好地保持目标形状的显著特征;量化结果方面,交互式分割误差保持在较小稳定范围内,引入EQW模型带来的时间开销亦在可接受范围内。