AB INITIO CALCULATION OF THE ELASTIC AND OPTICAL PROPERTIES OF Al_3Sc COMPOUND

The ab initio method has been performed to explore the elastic and optical properties of Al3Sc compound, based on a plane wave pseudopotential method. It can be seen that the calculated equilibrium lattice parameter and elastic constants are in reasonable agreement with the previous experimental data. The elastic constants satisfy the requirement for mechanical stability in the cubic structure of the Al3Sc compound. The optical property calculations show that a strong absorptive peak exists from 0-15eV and a relative small absorptive peak exists around 30eV. The form is caused by the optical transitions between high s, p, and d bands, and the latter results from the optical transitions from high s, p, and d bands to the low 2p band.     

在纳米压入仪上进行悬臂梁法测量弹性模量的影响因素分析

对在纳米压入仪上进行悬臂梁法测量弹性模量的主要影响因素进行了综合分析,主要包括加载系统悬置弹簧刚度、压头压入、梁沿截面宽度方向挠曲、梁支座附加挠曲等影响。在考虑这些因素的基础上,得到了悬臂梁的有效挠度,利用有效挠度与载荷之间的关系,评价悬臂梁材料的弹性模量。对单晶硅(100)悬臂梁试样进行了实验,得到其弹性模量为155GPa±9.5%GPa,与参考文献值符合较好。表明在纳米压入仪上进行悬臂梁法测量,只有综合这些影响因素后,才能获得有效、准确的弹性模量测量结果。     

界面扩展粘度的测量

介绍了界面扩展粘度κ的测定方法及其原理 ,列出了其相应的测定结果 ,同时对各种测定方法进行了分析与比较 ,并对它们的优缺点进行了讨论     

芳纶及其功能织物的研究动态

芳纶是一种耐高温的高强高模特种纤维。介绍了间位芳纶和对位芳纶的结构和性能,以及当前利用其性能制得的各种功能芳纶织物。指出芳纶今后的研究方向:更高的力学性能,130～170GPa的弹性模量,60～90GPa的抗拉强度;更多的功能特性,尤其是耐500～600℃高温的特性。以期芳纶功能织物特性大幅度提高,应用更广泛。     

基于等幅周期荷载下软岩Bingham本构模型的研究

为建立一种描述等幅周期荷载下软岩应变特性的本构模型,将Bingham模型中的常值黏壶元件替换成与循环次数相关的变系数黏壶元件,常值弹性元件替换为随周期荷载循环次数的增大而衰减的非定值弹性元件,即可得到反映周期荷载下软岩各种应变规律的Bingham本构模型。当循环荷载应力上限值σmax大于岩石的临界强度σs时,模型为可反映软岩3个应变阶段的改进4参数Bingam模型;反之则为反映软岩前两个应变阶段的非常值2参数Hook模型。将周期荷载分解为一个定值荷载和一个平均应力值为零的周期荷载,基于流变力学理论给出了定值荷载作用下基于该模型的本构方程式,再根据黏弹性力学理论,给出了平均应力值为零的周期荷载下基于该模型的本构方程式,最后将已获得的本构方程式叠加即得到周期荷载下软岩本构方程式。结果表明:所建立的本构方程式可较好描述周期荷载下不同软岩各类应变特征,对各类软岩的应变曲线拟合的相关系数均在0.868以上,且同一种岩石模型中弹性元件系数初始值随周期荷载的动应力幅值的增大而减小,岩石加速应变速率参数随动应力幅值的增大而增大。     

电晕法处理超高相对分子质量聚乙烯纤维

用电晕法对超高相对分子质量聚乙烯纤维进行了表面处理。利用DPPH检测纤维表面自由基的产生和变化，并用XPS表面元素分析、SEM等方法探讨了纤维表面性能处理前后的变化。实验发现，通过电晕处理后，纤维复合材料的抗剪切强度从未处理的5．98MPa提高到14．3MPa。     

考虑纤维波动[＋φ／-φ]缠绕角管件的轴向弹性模量计算方法

本文在计算[ φ/-φ]缠绕角管件的轴向弹性模量时,通过引入纤维波动程度参数来计入纤维波动的影响,理论计算结果与层板理论计算结果相比更接近实验结果,说明本文提出的算法,可在一定程度上计入纤维波动的影响。     

Mechanical Properties of Porous Materials

Porous materials are commonly found in nature and as industrial materials such as wood, carbon, foams, ceramics and bricks. In order to use them effectively, their mechanical properties must be understood in relation to their micro-structures. This paper studies the mechanical properties of a few common porous materials: carbon rods, ceramics, polymeric foams and bricks. The characterisation of pore structures was performed using a Mercury Porosimeter. Detailed information was obtained on the density, porosity, surface area and pore size distribution. A large number of experiments on either bending or compression were conducted in order to obtain their macro-mechanical properties such as Young's modulus, hardness and strength. Based on the experimental observations, theoretical models were employed to predict the macro-properties from the micromechanics viewpoint. By studying the deformation of pores the global behaviour was calculated. Two simple formulae for the elastic modulus, E, were proposed: for low values of porosity, , E = E⁰(1 – 2) (1 + 4²) where E⁰ is the elastic modulus when the porosity is zero; for high value of porosity such as for foams E = E⁰ (1 – )². The theoretical results agreed well with the experimental ones. The study has provided insights into the mechanical properties of porous materials over a wide range of porosity values.     

苎麻落麻纤维增强热固性树脂复合材料的制备及性能研究

本文介绍了落麻纤维、落麻热压毡、落麻无纺毡制备热固性树脂复合材料的工艺过程;比较了这三种复合材料的力学性能;结果表明,用无纺毡制备复合材料的方法可较大幅度提高纤维含量,能较好地解决落麻纤维在复合材料中的分散问题.     

Brillouin-Scattering Study of the Elastic Constants of ErVO4

The room-temperature elastic constants of ErVO₄ were considerably smaller than those of isostructural silicate and phosphate analogs. The generally "less-rigid" crystalline lattice and weaker metal-oxygen bond-strength in the RVO₄ (R = rare earth elements) phases indicates that these materials are of interest for potential applications as an interphase component in toughened oxide ceramic composites.