提高20t电弧炉炉衬寿命工艺实践

炉渣碱度、泡沫渣高度、吹氧角度、补炉方式等是影响20t电弧炉炉衬寿命的主要因素。为了提高炉衬寿命,莱钢炼钢厂采取了控制炉渣组成、泡沫渣全程埋弧操作、吹氧、喷补炉衬等多项措施,使炉衬寿命稳定在600炉次以上。     

微机控制电瓷修坯机

阐述了微机数控系统对高压棒型产品成型过程自动控制的工作原理和结构原理。     

利用双种群遗传算法进行数值试井自动拟合

遗传算法以随机化技术为指导，通过对整个解空间的高效搜索而得到全局最优解，当解空间较大时，常规遗传算法难以同时保证搜索速度和最优解的精度。针对这种缺陷提出了应用双种群遗传算法，即利用具有不同搜索策略的2个种群进行联合搜索，既保证了最优解的精度，又提高了搜索速度，将其应用于数值试井自动拟合解释，比常规遗传算法能节省50％以上的计算时间。     

Mn-containing catalytic materials for the total combustion of toluene: The role of Mn localisation in the structure of LDH precursor

Mg/Mn/Al mixed oxide systems of similar atomic ratios close to 2/0.5/1 were obtained by calcination of Mg,Al layered double hydroxide (LDH) type precursors containing Mn either in the cationic form within the brucite layer or as permanganate anions in the interlayer. The materials were characterised with PXRD, thermal analysis, XPS, ESR, TPR and BET. In mixed oxides derived from interlayer-doped precursor PXRD identified MgO–MnO solid solution and poorly crystalline Al-rich spinel phase, while those obtained from layer-doped LDH contained a better crystalline Mn-rich spinel. Surface of both materials was covered with poorly crystalline and/or amorphous Mn⁴⁺-containing phases. Higher reducibility of this surface coat in calcined layer-doped catalyst, as compared to interlayer-doped one, was attributed to the differences in the nature of underlying crystalline phases, and was considered the chief reason for the higher catalytic activity of this catalyst in the total oxidation of toluene.     

明渠湍流床面附近跃移层面颗粒浓度垂线分布

本文以动理学理论的Boltzmann方程为基础，考虑明渠湍流床面附近猝发喷射和清扫运动对跃移层内运动颗粒的不同作用，分析了明渠中泥沙颗粒浓度垂线分布问题，得到了适用于包括跃移层、悬移层在内的统一浓度垂线分布公式。文中着重研究了跃移层内运动颗粒的浓度垂线分布，并将本文结果与实测跃移层内浓度垂线分布及实测跃移层顶部浓度进行了对比，结果表明理论与实验两者符合较好。     

只读式超分辨光盘的膜层设计和分析

超分辨技术是一种无需减小记录波长或增大数值孔径而提高存储密度的方法。Ge Sb Te是一种良好的相变光存储材料 ,在超分辨光盘中可作为掩膜。利用多层膜反射率的矩阵法计算了掩膜为Ge2 Sb2 Te5薄膜的超分辨只读式光盘的光学参数与各膜层厚度之间的关系 ,最后得到了较为理想的膜层厚度匹配。采用磁控溅射法制备了只读式超分辨光盘 ,测量了光盘的光学性质。     

高炉鼓风机就地扩容改造方案及经济效益

介绍了利用高炉鼓风机基础实施不易地扩容改造的设计工艺方法，该方法不仅降低了设计、施工、安装费用，而且缩短了施工周期，降低了固定资产投资。     

金属PTC陶瓷复合材料结构及其导电机理

研究了金属ＰＴＣ陶瓷复合材料的电学性能和其材料组分。结果表明，掺入金属的ＰＴＣ陶瓷材料经氮气中烧结，然后在空气中进行热处理，材料表面形成高势垒层，金属ＰＴＣ陶瓷复合材料的室温电阻较ＰＴＣ的陶瓷高。样品之中存在大量不同类型的极化，在低温时样品电阻较高，温度增加后，大量各种类型离子极化出现，在变价金属铁的变价导电作用下，削弱表面势垒，使金属ＰＴＣ陶瓷复合材料电阻降低，表现出ＮＴＣ现象。在电场作用下，正负电荷、晶粒畸变和空位缺陷等产生空间电荷极化使金属ＰＴＣ陶瓷复合材料有较高介电常数。介电损耗（ｔｇδ）频谱和介电δ温度谱上都出现一个介电峰，其主要原因是跃迁极化，金属阳离子由一个位置跃迁到另一个位置，在介电损耗所对应的频率和温度时出现跃迁极化率最大     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381