The current and residual value of superphosphate for lupins grown in rotation with oats and wheat on a deep sandy soil

In a field experiment on a deep pale-yellow sand in a 600 mm per annum rainfall Mediterranean environment of south-western Australia, six levels of phosphorus (P) as superphosphate (O up to 546 kg P ha^–1) were applied once only, to the soil surface, before sowing lupins (Lupinus angustifolius). The lupins were grown in a continuous arable cropping rotation with, in successive years, oats (Avena sativa), wheat (Triticum aestivum), lupins. Five such rotations were started in the experiment from 1985 to 1989. The experiment continued until the end of 1990.The relationship between lupin seed (grain) yields and the level of P applied was measured in the year of P application for five successive years (1985 to 1989). The relationship had the same general form but it varied between years, largely due to different maximum yields (yield plateaux) in each year.The residual value of superphosphate applied three years previously was measured for lupins on two occasions (1988 and 1989) relative to superphosphate applied in the current year. The residual values was different in the two years. The superphosphate applied three years previously was about 30% as effective as freshly applied superphosphate in 1988, and 12% as effective in 1989.At each harvest, the relationship between grain yield and the P concentration in the grain differed for different species. However, for each species at each harvest, the relationship was similar regardless of when the P was applied in the previous years. Thus each species had the same internal efficiency of P use curve, and yields varied only with P concentration in tissue.Bicarbonate-extractable soil P was determined on soil samples taken in mid-July of 1989 and 1990. These soil test values were related to grain yields at harvest. The relationship between yield and soil test values had the same general form but varied for different species within years and for each species between years. It also varied for each species within years depending on the year the P was applied.     

中国丙烯腈生产技术国产化发展过程

论述了30年来中国丙烯腈生产技术的发展概况和目前达到的技术水平。中国于1960年开始氨氧化法制丙烯腈技术的开发,大致可分为三个时期:1960—1969年实验室基础研究和中间试验,进行了固定床和流化床及相适应的催化剂以及丙烯腈回收精制工艺的研究。1970—1980年建成了一批生产装置并进一步改善了生产工艺和催化剂。1981年到目前是以国际先进水平为目标,开发了高性能催化剂、流化床反应器和新的丙烯腈回收精制工艺。目前已开发成功的MB-86型催化剂、内构件流化床、复合萃取分离新工艺等具有国际80年代末期水平。丙烯单耗为1.02—1.05t丙烯/t丙烯腈,同时可分离出纤维级丙烯腈,高纯度氢氰酸和浓度达80%的乙腈。也完成了乙腈精制、硫铵回收等副产物回收技术。在此基础上已经开始设计两个万吨级丙烯腈工厂。     

国内外改质沥青生产的现状及其发展

煤焦油沥青是炼铝及碳素工业的重要原料之一，它地质量如何直接影响到制品的技术经济指标。近年来，随着科学技术的发展，煤焦油沥青重整改质技术引起重视。目前已有许多国家已生产出改质沥青来满足制取电炉炼钢超高功率电极以及制品铝电解板的要求证同国内对此也开始进行研制工作。介绍了国内外改质沥青生产的现状及发展，并提出了参考建议。     

废电解液除杂制取硫酸铜和粗镍

介绍了废电解液除杂制取硫酸铜和粗镍的主要工艺条件及试验结果。在废电解液中加入CH80调节pH值到一定范围后,再加入CH64将电解液中Fe2+等杂质除去,铁的去除率可达到94%～98%。然后向滤液中加入CH80调节pH值沉淀铜。过滤后的滤饼用H2SO4溶解后再结晶,可得到CuSO4·5H2O晶体。滤液中加入Na2CO3沉淀镍,过滤后的滤饼即为粗镍(NiCO3)。铜和镍的回收率分别达96%和90%。该流程简单,投资少,效益高,环境保护好,在工业上有较广的应用前景。     

�ݼ����߷����������Ϸ�

通过对J.J.Arps方程的推导,提出了油气藏产量递减曲线分析的最佳拟合法。用该法可直接求出递减指数N、初始递减率D1及油气递减前的稳定产量Qi,避免了使用试差法的大量运算过程,大大提高了油气藏工程中指标预测的精度。     

水平井生产测井技术应用

通过技术合作，对水平井生产动态监测测井技术进行了探索，取得了一定效果。介绍了水平井产出剖面测井的关键技术。介绍了将测井仪器送入水平钻穿的地层中的3个传输测井工艺，包括钻杆传输方法、柔性管传输方法和井下牵引输送方法；介绍了所采用的测井系列，重点分析解决油汽水三相分离问题的测井方案；介绍了水平井测井资料的解释和评价技术；通过模拟实验，确定井中4种流体流型，提出持液率关系式和流量测井响应关系式。     

济钢中板厂加快技术创新的对策

本文通过对中板厂近年来技术改造后工艺装置和技术水平的分析，并结合中国加入WTO后对中国钢铁企业面临全球化市场竞争严峻性的认识，提出了中板厂在实现高产生产模式后，应加快技术创新的步伐，尽快完成由高产向优质、多品种、低消耗的高效化生产模式转化的主导思想、措施及建议。     

2,6-二甲基萘生产技术进展

概述了国外2，6-二甲基萘生产技术现状，详细介绍了ExxonMobil公司2，6-二甲基萘的工艺路线和日本神户制钢所的提纯方法，指出了实现我国2，6-二甲基萘工业化生产应注意的问题。     

螺杆泵采油工艺技术在埕岛油田的应用研究

针对埕岛油田的储积层特征和螺杆泵采油工艺的技术特点,开展了一系列的理论与实际的配套研究,从优化泵的设计,杆、管的配套,到采用软启、缓停等技术,逐步完善了螺杆泵采油工艺技术。该技术在胜利浅海埕岛油田的应用中取得了良好的效果,使螺杆泵平均检泵周期达到1172d,是国外同类螺杆泵的3倍以上。     

邯钢24m2烧结机节能降耗的实践

详述了邯钢24m^2烧结机在节能降耗方面所采取的措施及取得的效果。并提出了进一步降低能耗的思路和举措。