挠性抗回旋PDC钻头的有限元分析

回旋是导致PDC钻头早期失效的主要原因，介绍了一种基于挠性钻头的构想设计的抗回旋PDC钻头，阐述了其结构和抗回旋原理。对挠性钻头的公、母接头进行了有限元应力分析，说明了模型建立、网格划分以及约束和载荷施加过程中所采用的方法和关键技术。有限元分析结果表明挠性钻头的强度满足要求。     

影响长廊阻抗式调压室配筋的几个因素分析

采用三维非线性有限元方法,对四川天全县干溪坡水电站调压室结构特性进行研究,并对几个影响配筋的因素进行敏感性分析,得出各个因素对配筋结果的影响,为调压室结构设计提供科学依据。     

Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method

In this study, firstly, thermal analyses are investigated on a conventional (uncoated) diesel piston, made of aluminum silicon alloy and steel. Secondly, thermal analyses are performed on pistons, coated with MgO-ZrO₂ material by means of using a commercial code, namely ANSYS. Finally, the results of four different pistons are compared with each other. The effects of coatings on the thermal behaviors of the pistons are investigated. It has been shown that the maximum surface temperature of the coated piston with material which has low thermal conductivity is improved approximately 48% for the AlSi alloy and 35% for the steel.     

某跨线桥施工支架方案设计

结合某大桥的概况,根据梁体施工工艺要求、现场实地勘察情况确定跨线施工方案,支架采用布架灵活、搭拆方便、承载力大的WDJ碗扣式多功能钢支架,部分预应力现浇连续箱梁采用支墩加纵梁预留门洞的支架现浇,取得良好效果。     

钢结构稳定设计——理论与实践

本文提出了实际工程结构的非线性理论设计和分析方法(NIDA),并以澳门回归纪念馆的设计为例,展示了本方法的优越性.在设计过程中,设计者无需假设K系数和有效长度,在结构分析完成后便可迅速完成设计,因此本文提出的方法既经济又便利.尽管对于钢框架在往复荷载及动力荷载作用下的弹塑性大位移分析已经非常成熟,但本文的方法开创了结构的非线性分析及设计的新纪元,能够对现行的设计方法理论起到巨大的推动作用.     

节理岩体的代表单元集合体模型及弹性参数预测

本文明确提出了节理岩体“代表单元集合体”的概念和模型，通过对节理岩体的“代表单元集合体”进行数值模拟，研究了节理岩体的“代表单元集合体”的变形特性，建立了节理岩体的弹性模型，提出了预测节理岩体宏观等效弹性参数的计算机模拟方法，并将其应用于岩体工程稳定性分析中。     

Effects of calcination temperature on phase and microstructure evolution of BaTi4O9 powders

Calcining of the mixture of BaCO₃ and TiO₂ with a ratio 1:4 at different temperatures was carried out to synthesize BaTi₄O₉ powders. Phase evolution of the samples was studied using the differential thermal analysis (DTA) and X-ray diffractometry (XRD). Both techniques confirmed that the formation of BaTi₄O₉ started around 1000 °C. The XRD peaks showed that BaTi₄O₉ was most pronounced at 1250 °C. X-ray line broadening methods were employed to study the variation of particle size and microstrain of the BaTi₄O₉ powders. The Voigt function in a single line and the pseudo-Voigt function in the variance methods were used in our case. We found that both functions resulted in the same trends, i.e., the particle size increased with the temperature with the biggest size of 180 and 160 nm, whilst the microstrain yielded the opposite trend with the lowest values of 6.2 × 10^–3 and 1.1 × 10^–3. The scanning electron microscopy (SEM) study revealed the size of the large particles formed, due to agglomeration, to be about 0.5–1.9 μm. Furthermore, it was shown that irregular shapes of BaTi₄O₉ powders necked to each other appeared at 1000 °C and grew into ellipse and rod shapes at 1250 °C. Electronic Publication     

Effect of variable friction coefficient on sheet metal drawing

A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for circular blanks. A good agreement is obtained between the numerical and experimental results for the variable friction model used.     

封隔器胶筒接触应力分布有限元计算

利用ANSYS软件对3种封隔器胶筒的接触应力进行了有限元计算，得到了接触应力沿胶筒轴向的分布情况。比较不同结构封隔器胶筒在相同条件下的接触应力分布，可知新型封隔器胶筒在高压下接触应力分布更为均匀合理，具有较好的应用前景。     

光纤专用网中基于DSP的Q值在线检测模块的设计

基于误码率与Q值的对应关系，本文介绍一种Q值在线检测方法，模块设计采用DSP技术，并讨论了该模块在光纤工业专用网（FIN）中的应用。