光刻胶灰化工艺与深亚微米线条的制作

随着器件尺寸的缩小，细线条的制作成为很关键的工艺，普通光学光刻已接近其分辨率的极限，而电子束光刻和Ｘ射线光刻技术复杂、费用昂贵。本文对光刻胶灰化工艺进行了分析和研究，并应用此工艺进行了深亚微米线条的制作，在普通光学光刻机上制作出宽度小于０．２５μｍ细线条。我们已将此工艺成功地应用在深亚微米ＭＯＳＦＥＴ的制作中。     

利用梯度方向信息的随机Hough变换

针对随机Ｈｏｕｇｈ变换（ＲＨＴ）在处理复杂图像随机采样造成的大量无效积累提出一种改进的用于直线检测的ＲＨＴ，较发地解决了无效果累积问题，并使改进后的算法具有计算速度更快，占用内存更少以及检测性能更好等优点。     

聚氨酯泡沫夹克管生产材料的代用

介绍一种用于生产聚氨酯泡沫夹克管保温层的新材料聚酯聚醚，报道选用这种材料生产泡沫夹克管的工艺及工要工艺参数和产品达到的技术指标及现场应用情况。     

双材料挤压成形的数值分析

基于非线性有限元理论和方法，并引入摩擦单元技术，对双材料的挤压成形进行了数值分析，揭示了挤压过程中双材料的流动规律。     

各向加权异性有限元法在不可压粘性流动计算中的应用

本文利用各向异性张力有限单元，考虑到其独特的性质，提出了一种各向加权异性的算法，即在不同方向采用不同连续性的插值函数，然后再在原连续性较弱的方向以连续性较强的插值函数计算，最后把两次计算的结果加权处理。这种方法可以适应两个方向连续性要求不同或相同的各种情况，即克服了一般各向异性张力有限单元的局限性，又大大减少了存贮量和计算量。     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

Vibration Monitoring and Diagnosis of Pipe-line Pumps on Offshore Platforms

ＶｉｂｒａｔｉｏｎＭｏｎｉｔｏｒｉｎｇａｎｄＤｉａｇｎｏｓｉｓｏｆＰｉｐｅｌｉｎｅＰｕｍｐｓｏｎＯｆｓｈｏｒｅＰｌａｔｆｏｒｍｓＺｈｅｎｇＷｅｎＴｅｃｈｎｏｌｏｇｉｃａｌＦａｃｕｌｔｙｏｆＭａｉｎｔｅｎａｎｃｅＥｎｇｉｎｅｒｉｎｇＧｕａｎｇｚｈｏｕ...     

激光扫描共焦荧光显微镜的电子控制系统研究

介绍了激光扫描共焦荧光显微镜的电子控制系统，为了提高激光扫描器的定位精度，在系统中提出采用基于闭环象素时钟发生器的检流计振镜所固有的扫描非线性失真补偿方案，减少输出图象的枕形畸变，实现行扫描空间位置的均匀性。在以细分梯形波电流驱动反应式步进电机情况下，根据实测θｉ曲线，用反插法求得与步进电机运行非均匀性相补偿的相电流波，从而获得在小电流情况下高角度均匀的步进电机细分运行特性。     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.