铸铝激光熔融处理后的组织与性能

应用光学和电子显微镜及显微硬度计研究了铸造Al-Si合金经激光表面熔融处理后的组织和性能。指出,组织分熔化区、过度区和基体三层。在熔化区中树枝状先共晶α相的平均宽度由原始组织的20～40μm细化到2～3μm,同时共晶组织也被大大细化。这些变化使显微硬度值由67.4提高至109～115.     

差动光栅在精密测试中的应用

提出差动光栅概念,举例说明差动光栅在光纤面板刀口响应测试和材料形变自动监测系统等精密测试中的应用。     

黑白电视机的电磁兼容设计

本文结合我厂μPC三片机的设计布局,探讨黑白电视机电路的电磁兼容设计。通过理论计算,提出中放屏蔽材料选择的理论依据。     

Thin conducting polypyrrole film on insulating surface and its applications

An electrically conductive plastic material was obtained by the polymerization of pyrrole on insulating polymeric materials and nylon cloth impregnated with the oxidant by vapour phase technique, resulting in a uniform, smooth and adherent coating of conducting polymer having a surface resistance ranging from 200 Ω/□ to 20 kΩ/□, which makes it suitable for applications as an antistatic material.     

多孔材料气体流量的简便计算

采用简便方法计算气体通过多孔材料的流量。当层流时，流量与压差按线性关系计算；紊流时，应按幂函数关系计算。本文提出了计算公式。     

响洪甸电站引水隧洞进口水下岩塞爆破施工

响洪甸抽水蓄能电站水下岩塞爆破施工要求高,技术新,难度大.由于施工准备充分,并进行了一系列材料及施工试验,工程进展顺利,排孔造孔、导洞药室开挖、药管与起爆体加工、装药与堵塞、网络施工、充水补气等工程施工质量符合设计要求,岩塞爆破准时成功起爆.     

济钢第一炼钢厂降低钢铁料消耗实践

济钢第一炼钢厂通过优化入炉原料结构,改进冶炼工艺,实施少渣炼钢,有效减少了转炉吹损,降低了钢铁料消耗成本,2002年增加炼钢综合经济效益3100多万元。     

Void formation and growth in a class of compressible solids

A new class of compressible elastic solids, which includes the Blatz-Ko material as a special case, is proposed. A closed-form solution is constructed and studied for a bifurcation problem modeling void formation in this class of compressible elastic solids. The relation between the void-formation condition and the material parameters is obtained analytically. An energy comparison of the void-formation deformation and the homogeneous expansion deformation is carried out.     

Monolithic Catalysts with Low Noble-Metal Content for Exhaust Purification of Small Gasoline Engines

A series of low noble-metal coment monolithic catalysts for exhaust purification of small gasoline engines was investigated, and it was found that the Pt/Rh-OSM/Al2O3 （where OSM was oxygen storage material） catalyst with Ce0.5Zr0.5-MnOx（3%MnOx） OSM held low light-off temperature for CO, HC, and NO; quite wide three-way window, and outstanding thermal stability. The catalyst could efficiently comrol exhaust emission of small gasoline engines.     

高炉加入含钛物料护炉的方法探讨

比较分析了目前高炉所采用的两种加入含钛物料护炉的方法，长期少量均匀加入法和间断大量加入法，并结合梅山１号高炉折护炉实践和停炉后的破坏调查结果，提出了第三种加入含钛物料的方法，即长期适量加入法。