Novel Heteroleptic CuI Complexes with Tunable Emission Color for Efficient Phosphorescent Light‐Emitting Diodes

A series of orange‐red to red phosphorescent heteroleptic Cu^I complexes (the first ligand: 2,2′‐biquinoline (bq), 4,4′‐diphenyl‐2,2′‐biquinoline (dpbq) or 3,3′‐methylen‐4,4′‐diphenyl‐2,2′‐biquinoline (mdpbq); the second ligand: triphenylphosphine or bis[2‐(diphenylphosphino)phenyl]ether (DPEphos)) have been synthesized and fully characterized. With highly rigid bulky biquinoline‐type ligands, complexes [Cu(mdpbq)(PPh₃)₂](BF₄) and [Cu(mdpbq)(DPEphos)](BF₄) emit efficiently in 20 wt % PMMA films with photoluminescence quantum yield of 0.56 and 0.43 and emission maximum of 606 nm and 617 nm, respectively. By doping these complexes in poly(vinyl carbazole) (PVK) or N‐(4‐(carbazol‐9‐yl)phenyl)‐3,6‐bis(carbazol‐9‐yl) carbazole (TCCz), phosphorescent organic light‐emitting diodes (OLEDs) were fabricated with various device structures. The complex [Cu(mdpbq)(DPEphos)](BF₄) exhibits the best device performance. With the device structure of ITO/PEDOT/TCCz:[Cu(mdpbq)(DPEphos)](BF₄) (15 wt %)/TPBI/LiF/Al (III), a current efficiency up to 6.4 cd A^–1 with the Commission Internationale de L'Eclairage (CIE) coordinates of (0.61, 0.39) has been realized. To our best knowledge, this is the first report of efficient mononuclear Cu^I complexes with red emission.     

Modeling and performance analysis of VI‐CRA: A congestion control algorithm for vehicular networks

This study proposes a Vehicle ID‐based CAM Rate Adaptation (VI‐CRA) algorithm for beacon messages in the vehicular network. Foremost, an improved vehicle ID–based analytical model is proposed at the MAC layer of vehicular network. The model weighs the random back‐off number chosen by vehicles participating in the back‐off process, with the vehicle ID incorporated in their respective CAMs. This eventually leads to the selection of a vehicle ID–based random back‐off number, minimizing the probability of collision due to same back‐off number selection. It is worth noting that the improved analytical model outperforms the existing works in terms of average packet delay since only one fourth of the contention window size is used throughout the simulation. To enhance the performance of the analytical model, the paper incorporates a congestion control algorithm, by adapting the rate of CAM broadcast over the control channel. The algorithm is designed considering a wide range of scenarios, ranging from nonsaturated to extremely saturated network (in terms of collision probability) and sparsely distributed to teemed network (in terms of vehicular density). For better analyses of simulation results, the algorithm is applied over different vehicle ID–based back‐off numbers. Simulation results for all the back‐off numbers show that vehicle ID–based CAM rate adaptation algorithm performs better than the traditional fixed CAM rate IEEE 802.11p, even at high vehicular density.     

内圆切片机张刀对切片质量的影响

对内圆切片机的切削原理和刀片的张紧与张紧装置和刀片在切削过程中的动态特性进行了研究。     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

电子商务中的PKI、SSL与SET的技术分析

PKI是目前在电子商务中安全传输方案，SSL和SET两种安全的电子交易协议，在网上交易中有着广泛地应用，是大多数在线支付所采用的支付协议。这里在探讨PKI、SSL、SET技术原理的基础上，对它们各自的作用、技术实现、工作漉程等进行了描述；对它们之间的联系、区别、应用范围进行了深入的分析。     

Ultraefficient Non-Doped Deep Blue Fluorescent OLED: Achieving a High EQE of 10.17% at 1000 cd m−2 with CIEy<0.08

The pursuit for efficient deep blue material is an ever-increasing issue in organic optoelectronics field. It is a long-standing challenge to achieve high external quantum efficiency (EQE) exceed 10% at brightness of 1000 cd m⁻² with a Commission International de L'Eclairage (CIE_y) <0.08 in non-doped organic light-emitting diodes (OLEDs). Herein, this study reports a deep blue luminogen, PPITPh, by bonding phenanthro[9,10-d]imidazole moiety with m-terphenyl group via benzene bridge. The non-doped OLED based on PPITPh exhibits an exceptionally high EQE of 11.83% with a CIE coordinate of (0.15, 0.07). The EQE still maintains 10.17% at the brightness of 1000 cd m⁻², and even at a brightness as high as 10000 cd m⁻², an EQE of 7.5% is still remained, representing the record-high result among non-doped deep-blue OLEDs at 1000 cd m⁻². The unprecedented device performance is attributed to the reversed intersystem crossing process through hot exciton mechanism. Besides, the maximum EQE of orange phosphorescent OLED with PPITPh as host is 32.02%, and remains 31.17% at the brightness of 1000 cd m⁻². Such minimal efficiency roll-off demonstrates that PPITPh is also an excellent phosphorescent host material. The result offers a new design strategy for the enrichment of high-efficiency deep blue luminogen.     

TD-LTE基站IP地址和VLAN ID自动规划工具的开发

文章从工程应用的角度出发,针对L3 VPN承载网方案中TD-LTE基站IP地址和VLAN ID规划工作自主研发了TD-LTE基站IP地址和VLAN ID自动规划软件工具,详细叙述了自动规划工具的功能分配及主要算法的实现,并将实际工程中的基础数据应用于该软件,实现了预期功能。     

Organic Solid Solutions: Formation and Applications in Organic Light‐Emitting Diodes

To enhance the performance of organic devices, doping and graded mixed‐layer structures, formed by co‐evaporation methods, have been extensively adopted in the formation of organic thin films. Among the criteria for selecting materials systems, much attention has been paid to the materials' energy‐band structure and carrier‐transport behavior. As a result, some other important characteristics may have been overlooked, such as material compatibility or solubility. In this paper, we propose a new doping method utilizing fused organic solid solutions (FOSSs) which are prepared via high‐pressure and high‐temperature processing. By preparing fused solid solutions of organic compounds, the stable materials systems can be selected for device fabrication. Furthermore, by using these FOSSs, doping concentration and uniformity can be precisely controlled using only one thermal source. As an example of application in organic thin films, high‐performance organic light‐emitting diodes with both single‐color and white‐light emission have been prepared using this new method. Compared to the traditional co‐evaporation method, a FOSS provides us with a more convenient way to optimize the doping system and fabricate relatively complicated organic devices.     

A Facile Preparative Route of Nanoscale Perovskites over Mesoporous Metal Oxide Films and Their Applications to Photosensitizers and Light Emitters

By two‐step sequential Pb²⁺ adsorption and reaction with methylammonium‐iodide (MAI) or ‐bromide (MABr) at a low concentration level of 0.06–0.10 m over mesoporous TiO₂ or ZrO₂ film, a well‐defined nanoscale CH₃NH₃PbI₃ (MAPbI₃) photosensitizer or CH₃NH₃PbBr₃ (MAPbBr₃) light emitter could be prepared in situ, respectively in a reproducible and atom‐economical way. The as‐prepared nanoscale perovskites are compared with their thin film counterparts in terms of light absorption/emission, crystallinity, surface morphology, and energy‐conversion efficiency. The nanoscale perovskite‐decorated films display more transparency than the bulky film due to the much lower amount deposited, while blueshifted and overwhelmingly brighter photoluminescence is observed in the “nano” relative to the “bulk” due to quantum size confinement. Transmission electron microscopy images also clearly show that a few nanometer‐sized perovskite dots are deposited homogeneously over the surface of TiO₂‐ or ZrO₂‐particulate film in the course of the current preparative route. When the nano‐MAPbI₃ is tested as a photosensitizer in a solid‐state dye‐sensitized solar cell configuration with a very thin ( ≈ 650 nm) TiO₂ mesoporous film, it has a promising initial power conversion efficiency of 6.23%, which outperformed the result of 2.28% from a typical organic molecular dye coded as MK‐2.     

Sizing of multi-stage Op Amps by combining design equations with the gm/ID method

Analog integrated circuit design has as integral parts both analytical reasoning and numerical validation in the process from topology construction to sizing. Given a circuit topology, different circuit sizing results can be obtained from different processes of sizing inference. Sizing methods by simulation-based numerical searching have been a continuously studied subject. However, almost all approaches in this category require an overwhelming number of circuit simulations to arrive at an optimized sizing result. On the other hand, many published manual sizing methods by using the conventional device equations also require repeated SPICE simulations to correct the equation-based sizing results. This paper proposes a systematic gm/ID-based initial sizing method specifically customized for designing multiple-stage operational amplifiers (Op Amps). A main feature of the proposal is to use circuit-level design equations as constraints on the gm/ID table lookup method to substantially reduce the uncertainty in the sizing calculations. As a result, a significant amount of SPICE based correction work can be reduced to complete an initial sizing. The proposed sizing procedure includes a few regular sizing rules customized to the configuration of multi-stage Op Amps. We validate the proposed sizing method by application to several multi-stage Op Amp examples with a capacitive load or Miller compensation. Simulations have justified that the produced initial sizing results can achieve most of the prespecified design targets.