Shear creep resistance of styrene–isoprene–styrene (SIS)‐based hot‐melt pressure‐sensitive adhesives

The effects of the properties of substrates and tackifier on the shear creep of SIS‐based HMPSAs were investigated. The holding power (t_b) and shear adhesion failure temperature (SAFT) were measured. The relationship between the complex viscosity and the holding power was examined. The holding power and SAFT values of the triblock SIS blends were higher than those of the diblock‐containing SIS blends, perhaps because blends using triblock SIS have higher crossover temperature and complex viscosity than those using diblock‐containing SIS. Higher levels of aromatic resin‐modified aliphatic tackifier and rosin ester were found to decrease the holding power of the HMPSAs. This maybe due to the fact that rosin ester and aromatic‐modified aliphatic resin are compatible with both the ends and midblocks of SIS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 825–831, 2006     

High PVC film‐forming composite latex particles via miniemulsification,part 1: Preparation

Miniemulsification technology was used to encapsulate TiO₂ particles inside a styrene/n‐butyl acrylate copolymer with high loading levels (11 to 70% PVC (pigment volume concentration)). In this approach, a St/BA copolymer dissolved in toluene in the presence of a costabilizer (hexadecane) was mixed with a dispersion of TiO₂ particles in toluene and sonified, and then emulsified in an aqueous surfactant solution by sonification. The effect of sonification time on both the dispersibility of the TiO₂ particles in the presence of the copolymer and hexadecane and on the encapsulated particle size was investigated. Particle size analysis by dynamic light scattering showed that these composite latexes are quite stable. It was also found that as the TiO₂ loading increased from 11 to 43% PVC, the particle size of the TiO₂ dispersion decreased while the polymer‐encapsulated TiO₂ particle size increased. The effect of surfactant concentration (sodium lauryl sulfate, SLS) on the encapsulated particle size was investigated using four different SLS concentrations in the 11% PVC system. The results showed that as the SLS concentration increased the particle size decreased, as expected. Also it was found that the minimum surfactant concentration that gives stable encapsulated TiO₂ particles is above 10 mM SLS. The role of HD in the recipe was studied for an artificial latex containing no TiO₂ and one prepared at 11% PVC, in terms of particle size before and after solvent stripping, and its effect on the T_g. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4504–4516, 2006     

电晕法处理超高相对分子质量聚乙烯纤维

用电晕法对超高相对分子质量聚乙烯纤维进行了表面处理。利用DPPH检测纤维表面自由基的产生和变化，并用XPS表面元素分析、SEM等方法探讨了纤维表面性能处理前后的变化。实验发现，通过电晕处理后，纤维复合材料的抗剪切强度从未处理的5．98MPa提高到14．3MPa。     

Novel pyridinium photoinitiators and their applications for the ultraviolet crosslinking of acrylic pressure‐sensitive adhesives

The demand for ultraviolet (UV)‐crosslinkable pressure‐sensitive adhesives (PSAs) has rapidly been increasing. A variety of different PSAs containing new photoreactive pyridinium derivatives have been evaluated for their effectiveness in improving adhesion and cohesion in UV‐crosslinkable PSAs. PSAs have been evaluated with respect to the tack, peel adhesion, and shear strength. This article summarizes the breakthrough technology used to achieve better performances in UV‐crosslinkable acrylic PSAs. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Improvement of polymer blend properties by changing sequence of mixing

The basic objective of this article is to improve the polymer blend properties by changing mixing sequence. Blending of two elastomers does not lead to a molecularly homogeneous blend (true solution), but to a heterogeneous system in which both polymer phases are present. In this article, the detailed study of heterogeneous distribution of carbon black as well as blend inhomogenity and the physicomechanical including dynamic mechanical properties of the blend has been carried out. The choice of the blend was natural rubber/polybutadiene rubber as 85:15. Heterogeneous carbon black distribution study was also performed in differential scanning calorimeter. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2735–2742, 2007     

蔗渣浆低浓黑液多聚物粘度对温度依赖性的关联模型

利用聚合物自由体积理论模拟了蔗渣浆低浓黑液对粘度对温度的依赖性的数学模型，最终得出黑液多聚物粘度与温度的相关式：η=A1exp[B1/(T-T0)]。利用示差扫描量热分析技术（DSC）得出了蔗渣黑液多聚物中连续相与分散相的转变曲线，并获得了表观温度T0的平均值为255K；通过实验数据拟合可回归出蔗渣黑液多聚物在不同浓度时的系数A1和B1值。因此，使用该粘度的数学模型可估算蔗渣低浓（接近40％固含量）黑液多聚物在操作温度范围内（20－100℃）的粘度值。     

采用高速剪切反应器生产超细氧化铋工艺探讨

利用硝酸铋溶液和碳酸铵溶液为原料，采用高速剪切反应器，500℃煅烧后可以生产出高纯、超细的氧化铋粉末。该方法制备出的氧化铋平均粒度0．71μm且粒度范围分布窄，颗粒形貌为类球形，晶相为纯α相，指标达到电子压敏陶瓷要求。由于粒度细小，可以在电子压敏陶瓷球磨工艺减少球磨工艺，并具有更好的分散效果。本文对超细的氧化铋粉末形成机理也进行了探讨。     

底吹钢包两相区两段模型

在考虑雷诺应力的基础上，建立了底吹钢包中气液两相区流体流动的两段模型。这一模型可用于计算近喷嘴处和浮羽流区各截面处两相流的平均速度、速度分布、流股直径和平均含气率等．数值计算表明：理论含气率与实验值符合很好．计算还表明：平均含气率和平均速度随高度的增大而减小，但流股直径随高度的增大而增大．另一方面，平均速度随初始供气量的增大而增大，而抽引比则随供气量增大而减小．通过两段模型可很好地描述喷嘴处气液流的行为．     

考虑纤维波动[＋φ／-φ]缠绕角管件的轴向弹性模量计算方法

本文在计算[ φ/-φ]缠绕角管件的轴向弹性模量时,通过引入纤维波动程度参数来计入纤维波动的影响,理论计算结果与层板理论计算结果相比更接近实验结果,说明本文提出的算法,可在一定程度上计入纤维波动的影响。     

Tactile display with tangential and normal skin displacement for robot-assisted surgery

This paper proposes a tactile display providing both shear and normal feedback to the fingertip for generating three-axis tactile feedback during teleoperation of a surgical robot. The display is composed of five balloons actuated by controlling the pneumatic pressure. The implemented display is 18?mm?×?18?mm?×?15?mm. This size is suitable for mounting the display onto the master controls of a surgical robot. The maximum normal and shear displacements are 2 and 1.3?mm, respectively. The proposed tactile display may provide perceivable stimuli to a human finger pad in all five directions: normal, distal, proximal, radial, and ulnar. This paper also reports on the results of psychophysical measurement of the minimum perceivable movement of the developed tactile display for each of the five directions.