基于危险理论的人工免疫原理与应用*

侧重以危险理论的基本机制为线索,对危险理论的研究现状加以系统论述.首先以危险理论的免疫模型入手,归纳提炼出仿真机理并建立起隐喻算法;介绍其中具有代表性领域中的应用情况;最后对基于危险理论的人工免疫研究的下一步工作进行展望.     

基于图的语义网络构造算法研究

在自然语言处理的基础上,将中医领域本体与图的基本性质相结合,提出了构造中医诊疗知识语义网络算法。给出了图的基本性质、语义网络的图定义,并为知识的网络表示建立了相应的数据结构。将算法用于中医领域语义网络和语义场构建。试验结果表明,该算法具有较好的实用性。提出的基于图的语义网络构造算法,对于文本挖掘、知识获取技术研究有重要意义,也是中医专家知识获取的有效方法。     

一种新的位错运动理论及对材料动态力学行为的描述

通过对位错在晶格内运动的动力学过程的全面分析。本文提出了一种考虑到粘性阻尼效应和热激活的位错集体运动统一理论。其特点是可用一简单的方程对从低速到高速运动的大量位错的平均行为进行统一描述。对ＫＣｌ晶体的典型实验怕拟合发现理论描述与实验结果相当一致。     

High cycle fatigue behaviour of Ti–6Al–4V alloy at elevated temperatures

High cycle fatigue behaviour of Ti–6Al–4V alloy was studied at 623 K and 723 K. Fatigue strength decreased at elevated temperatures compared with at ambient temperature. In the short life regime, fatigue strength was lower at 723 K than at 623 K, but in the long life regime it was nearly the same at both temperatures. At elevated temperatures, cracks were generated earlier at applied stresses below the fatigue limit at ambient temperature, indicating lowered crack initiation resistance. Small cracks grew faster at elevated temperatures than at ambient temperature, which became more noticeable with increasing temperature. After allowing for the elastic modulus, small cracks still grew faster at elevated temperatures.     

Abrasion erosion of concrete by water-borne sand

Hydraulic concrete structures frequently experience long-term abrasive erosion by water-borne sand, resulting in surface damage and eventually limiting their service life. In this study, the investigation of abrasion erosion tests on concrete with various water to cementitious material ratios (w/cm) was performed. The effects of the constituent materials on concrete structure abrasion erosion resistance were studied. The test results show that: (1) reduction in the w/cm ratio increases the tested concrete abrasion resistance; (2) the splitting tensile strength is a viable indicator for concrete abrasion resistance; (3) high permeability concrete exhibits weak abrasion resistance; and (4) concrete and low strength concrete made with coarser aggregate exhibit greater abrasion resistance.     

Decentralized observers with consensus filters for distributed discrete-time linear systems

This paper presents a decentralized observer with a consensus filter for the state observation of discrete-time linear distributed systems. Each agent in the distributed system has an observer with a model of the plant that utilizes the set of locally available measurements, which may not make the full plant state detectable. This lack of detectability is overcome by utilizing a consensus filter that blends the state estimate of each agent with its neighbors’ estimates. It is proven that the state estimates of the proposed observer exponentially converge to the actual plant states under arbitrarily changing, but connected, communication and pseudo-connected sensing graph topologies. Except these connectivity properties, full knowledge of the sensing and communication graphs is not needed at the design time. As a byproduct, we obtained a result on the location of eigenvalues, i.e., the spectrum, of the Laplacian for a family of graphs with self-loops.     

Finite-time coordination in multiagent systems using sliding mode control approach

Finite-time stability in dynamical systems theory involves systems whose trajectories converge to an equilibrium state in finite time. In this paper, we use the notion of finite-time stability to apply it to the problem of coordinated motion in multiagent systems. Specifically, we consider a group of agents described by fully actuated Euler–Lagrange dynamics along with a leader agent with an objective to reach and maintain a desired formation characterized by steady-state distances between the neighboring agents in finite time. We use graph theoretic notions to characterize communication topology in the network determined by the information flow directions and captured by the graph Laplacian matrix. Furthermore, using sliding mode control approach, we design decentralized control inputs for individual agents that use only data from the neighboring agents which directly communicate their state information to the current agent in order to drive the current agent to the desired steady state. Sliding mode control is known to drive the system states to the sliding surface in finite time. The key feature of our approach is in the design of non-smooth sliding surfaces such that, while on the sliding surface, the error states converge to the origin in finite time, thus ensuring finite-time coordination among the agents in the network. In addition, we discuss the case of switching communication topologies in multiagent systems. Finally, we show the efficacy of our theoretical results using an example of a multiagent system involving planar double integrator agents.     

Nonextensive lattice gauge theories: Algorithms and methods

High-energy phenomena presenting strong dynamical correlations, long-range interactions and microscopic memory effects are well described by nonextensive versions of the canonical Boltzmann–Gibbs statistical mechanics. After a brief theoretical review, we introduce a class of generalized heat-bath algorithms that enable Monte Carlo lattice simulations of gauge fields on the nonextensive statistical ensemble of Tsallis. The algorithmic performance is evaluated as a function of the Tsallis parameter q$q$ in equilibrium and nonequilibrium setups. Then, we revisit short-time dynamic techniques, which in contrast to usual simulations in equilibrium present negligible finite-size effects and no critical slowing down. As an application, we investigate the short-time critical behaviour of the nonextensive hot Yang–Mills theory at q$q$-values obtained from heavy-ion collision experiments. Our results imply that, when the equivalence of statistical ensembles is obeyed, the long-standing universality arguments relating gauge theories and spin systems hold also for the nonextensive framework.     

An intelligent negotiator agent design for bilateral contracts of electrical energy

In this paper, an intelligent agent (using the Fuzzy SARSA learning approach) is proposed to negotiate for bilateral contracts (BC) of electrical energy in Block Forward Markets (BFM or similar market environments). In the BFM energy markets, the buyers (or loads) and the sellers (or generators) submit their bids and offers on a daily basis. The loads and generators could employ intelligent software agents to trade energy in BC markets on their behalves. Since each agent attempts to choose the best bid/offer in the market, conflict of interests might happen. In this work, the trading of energy in BC markets is modeled and solved using Game Theory and Reinforcement Learning (RL) approaches. The Stackelberg equation concept is used for the match making among load and generator agents. Then to overcome the negotiation limited time problems (it is assumed that a limited time is given to each generator–load pairs to negotiate and make an agreement), a Fuzzy SARSA Learning (FSL) method is used. The fuzzy feature of FSL helps the agent cope with continuous characteristics of the environment and also prevents it from the curse of dimensionality. The performance of the FSL (compared to other well-known traditional negotiation techniques, such as time-dependent and imitative techniques) is illustrated through simulation studies. The case study simulation results show that the FSL based agent could achieve more profits compared to the agents using other reviewed techniques in the BC energy market.     

Performance of floating cum tilted-wick type solar still with the effect of water flowing over the glass cover

A simple transient performance of floating cum tilted-wick type solar still has been presented by incorporating the effects of water flowing over a glass cover, heat capacity of tilted-wick water surface and floating-wick water surface. Explicit expressions for flowing water, glass, tilted-wick water surface and floating-wick water surface temperature and efficiency of the system have been derived. Numerical calculations have been carried out for a typical day in the month of March 2004. The relative standard deviations between the numerical and experimental results of different temperature components of the proposed still have been found. The results indicate that the relative standard deviations between theoretical and experimental results are less than 8% (glass cover), 2% (tiltedwick water surface), 1% (floating-wick water surface) and 2% (flowing water at the lower end of the glass cover) an average for the working hours of the day. Moreover, based on the numerical results, the following conclusions have been drawn: (i) glass cover temperature decreases significantly; (ii) the effect of water flowing over the glass cover has a fascinating effect on the production of distillate output during peak sunny hours; (iii) water flow rate of 1.5 m/s is optimum, and beyond it the efficiency decreases. Experimental investigations have been performed at Sri Ramakrishna Mission Vidyalaya College of Arts and Science, Coimbatore, India.