CAD^2B—一个计算机辅助数据库设计系统

本文介绍了一个用Ｔｕｒｂｏ Ｃ语言在ＡＳＴ－２８６机器上实现的计算机辅助数据库设计系统ＣＡＤ＾２Ｂ。该系统提供了人机交互的环境，供设计者进行概念模型设计，并自动完成从概念模型逻辑模型的映射，创建满足规范化要求的关系表。该系统采用的概念模型是引入了事件和时间的扩展了的实体关系模型。该模型既能充分反映应用环境的静态和动态语义，又是向关系模式转化的基础。     

分子结构对增塑聚氯乙烯性能的影响

研究了聚合度、分子量分布和支化结构对增塑聚氯乙烯加工流变性能和物理力学性能的影响。结果表明，增塑ＰＶＣ的加工流变性能随聚合度的增加而恶化；拓宽分子量分布和引入支化结构均有利于加工流变性能的提高；增塑ＰＶＣ的拉伸强度随聚合度的增加而提高，而压缩永久变形却随之减小；分子量分布对物理力学性能的影响不大；支化ＰＶＣ的拉伸强度略有下降。     

HPVC／PP共混改性研究：Ⅲ低分子量反应性化合物作相容剂

采用低分子量反应性化合物作相容剂，即化学交联体系来改善ＨＰＶＣ／ＰＰ共混物的相容性。考察了在不同共混比下，不同化学交联体系对共混物力学性能的影响，并观察了共混物的微观形态。结果表明，采用低分子量反应性化合物作相容剂，共混物的拉伸强度提高，但冲击强度无改善。分散相尺寸减小，相间粘接得到改善。并比较了３种增容方法的效果，发现ＣＰＥ是ＨＰＶＣ／ＰＰ共混物的最佳相容剂。     

采用荷载平衡的概念表达预应力度及在初步设计中的应用

利用荷载平衡法的概念，将预应力度用等效荷载与外荷载的比值表达，设计可利用其比值确定预应力度，便其更简捷，明确，同时，提出了预应力度的真实值问题。     

A hybrid PC/PLC architecture for manufacturing-system control—theory and implementation

This paper presents a novel and generic PC/PLC-based software/hardware architecture for the control of flexible manufacturing workcells. The proposed implementation methodology is based on the utilization of any one of the available formal discrete-event-system control theories in conjunction with state-of-the-art industrial programmable-logic controllers (PLCs). The methodology has been illustrated to be a viable technique through its actual implementation in our laboratory using a robotic-workcell testbed. The specific control theory used is a combination of Extended Moore Automata and Ramadge-Wonham Automata that has been developed by our research group. The modular control software architecture has been developed for MS-Windows environments (running on one PC interfaced to the PLCs) and allows the use of different formal control theories as well as different commercial PLC hardware. The effective graphical user interface provides a transparent programming environment, where users are not expected to have a full knowledge of the formal control theory used.     

电致伸缩陶瓷微位移器非线性的数值方法补偿

本文通过对电致伸缩陶瓷材料的非线性进行分析。找到了补偿电致伸缩陶瓷非线性的数值方法，并对不同回程大小的电滞回线进行了分段处理，使补偿结果更为精确。     

The minimum squared euclidean distance of multi-h phase codes

The minimum squared Euclidean distance(MSED) of binary multi-h phase codes is presented. The signal segregation degree(SSD) has been put forward to determine MSED of multi-h phase codes. In order to maximize MSED, SSD should be as large as possible. The necessary and sufficient conditions of maximizing SSD are derived. Finally, SSD and the exact formulae for MSED of binary 2-h phase codes are also presented.     

Quantitative estimation: From the real world to the psychology lab.

Banaji and Crowder (see record 1990-00387-001) contend "that the movement to develop an ecologically valid psychology of memory has proven itself largely bankrupt" (p. 1185). The authors have two primary concerns. First, they believe that it is rare for studies of real-world cognition to support conclusions that generalize broadly. Second, they are concerned that such studies may be inherently incapable of making significant theoretical or methodological contributions. The research program outlined here can be viewed as a response (in the form of a case study) to the Banaji and Crowder position. Specifically, this project has adopted both theoretical and methodology perspectives from the study of real-world memory to address a long-standing issue in the mainstream memory literature. The project itself was designed to characterize the strategies used to estimate event frequency and the conditions that foster the use of these strategies. A valid model of the estimation process is necessary in order to understand the encoding and representation of event frequency. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of thermomechanical treatment on mechanical properties and electrical conductivity of a CuCrZr alloy

The CuCrZr alloy undergoes processes of precipitation during ageing. Besides precipitation hardening the strength is affected by cold deformation which is performed before and after ageing. The cold deformation (D ₁) before ageing accelerates the process of strength hardening, since it induces higher rate of precipitation from the saturated a-sold solution. Cold deformation (D ₂) after ageing primarily affects the alloy strength. In this paper the results of the effect of thermomechanical treatment on mechanical properties and electrical conductivity of a CuCrZr alloy are presented. The aim of the paper was to evaluate the most suitable combination of thermomechanical treatment and alloy properties.