The effect of aromatics on paraffin mild hydrocracking reactions (WNiPd/CeY–Al2O3)

The conversion of heavy paraffin and aromatics into a high-quality diesel fraction was performed in a microplant using a WNiPd/CeY-alumina catalyst. The effects of aromatics and naphtheno-aromatics on mild hydrocracking of hexadecane were studied at different concentrations. Two catalysts, with and without Pd and thermal treatment, were characterized by FTIR, XPS, and TPD of ammonia and ammonia plus naphthalene to complement previous study about the surface composition. The hydrocracking activity and selectivity were tested using different amounts and types of aromatics. This study demonstrated the presence of two acid strengths that contribute in different ways to paraffin and aromatics isomerization, ring opening, and cracking reactions. The product distribution obtained by mild hydrocracking of n-C₁₆ is between amorphous (SiO₂Al₂O₃) and Y-zeolite type of support. The aromatic adsorption on acid sites reduces the cracking rate and improves the survival of di- and tri-branched paraffin. A model for the path of reaction is discussed to explain the results.     

Enzymatic biodiesel production: Technical and economical considerations

It is well documented in the literature that enzymatic processing of oils and fats for biodiesel is technically feasible. However, with very few exceptions, enzyme technology is not currently used in commercial‐scale biodiesel production. This is mainly due to non‐optimized process design and a lack of available cost‐effective enzymes. The technology to re‐use enzymes has typically proven insufficient for the processes to be competitive. However, literature data documenting the productivity of enzymatic biodiesel together with the development of new immobilization technology indicates that enzyme catalysts can become cost effective compared to chemical processing. This work reviews the enzymatic processing of oils and fats into biodiesel with focus on process design and economy.     

赵凹区块酸化增注技术研究与应用

针对河南油田赵凹区块注水效果不好,欠注严重,酸化效果不理想的实际情况,开展了储层伤害因素分析和酸化增油技术研究,进行了酸液体系的配方优化,优选出的酸液具有对金属腐蚀性小,与地下流体配伍性好,对岩屑溶蚀率高的特点。现场实验取得了较好的增注效果,3口井实施有效率100％,注水压力下降了1-8 MPa。     

在以纯碱为原料的非强酸性水溶液体系中采用酸碱滴定分析的误差来源及分析方法的改进

以三聚磷酸钠生产过程为例,论述了在以纯碱为原料的非强酸性水溶液体系中,由于反应不完全导致反应物中存在少量的碳酸盐,这部分碳酸盐干扰了用酸碱滴定法测量的中和度,并据此提出中和度分析改进方法.由此可以推广到其它以纯碱为原料的非强酸性水溶液体系中.     

Separation of weak and strong acids by electro-electrodialysis—Experiment and theory

The experimental results of the separation of acetic acid (HA) from the sulfuric acid by the electro-electrodialysis (EED) method and the modeling of process have been presented. The Neosepta membranes CMX and ACM have been used. It has been found that the efficiency of retention of HA is high (>0.9) when the process is conducted below the limiting current density with respect to HSO₄⁻ or SO₄²⁻ anions. The observed current efficiency of the H₂SO₄ removal was rather low (CE_S = ca. 0.7, when the initial concentration of H₂SO₄ in the mixture was 1 or 2 M) which was caused by the nonideal selectivity of the anion-exchange membrane. The experimental results have been described by the model based on the extended Nernst-Planck equation and the Donnan equilibrium. Since the efficiency of the process depended mainly on the selectivity of anion-exchange membrane (ACM), the concentration of fixed charges of that membrane, , and the ratio of volume fraction of pores to their squared tortuosity, V_p/θ², have been chosen as the main fitting parameters. It has been found that the fitting of the EED data depends mainly on , whereas in the modeling of diffusion experiment (or an EED experiment conducted at low current density) both parameters are important. The best fit has been obtained for , i.e. ca. one order smaller than that determined experimentally. The obtained optimal value of V_p/θ², equal to 0.013, is consistent with those previously obtained for other Neosepta anion-exchange membrane.     

A disposable single-use electrochemical sensor for the detection of uric acid in human whole blood

We report here a non-enzymatic detecting electrode strip for fast monitoring of uric acid in human whole blood. A single-use amperometric uric acid sensor strip, incorporating a three-electrode configuration, has been fabricated on a polypropylene substrate using low cost screen-printing (thick-film) technology. Both the working and counter electrodes were prepared by screen-printing commercial carbon ink. The integration on the same support of pseudo-reference electrode was obtained by screen-printing a commercial silver ink and subsequent electrochemical pretreatment. Simply by placing a 20 μl human whole blood drop on the strip is enough for uric acid analysis by square-wave voltammetry. Real human whole blood samples were analyzed by this method and compared to the phosphotungstic acid clinical test procedure with satisfactory results.     

新型聚丙烯酸(934P、980)树脂的制备

详细研究了以乙酸乙酯和环己烷为溶剂，丙烯酸为单体，BPO，LPO，AIBN为引发剂，聚烯基多醚为交联剂，合成增稠能力强、透明度高的聚丙烯酸树脂。于混和溶剂存在下制得的聚合物，消除了以往由二氯甲烷为溶剂的反应介质中所得产品的毒性，可广泛应用于医药及日用化工等行业。     

Methacrylic acid–acrylamide-g-poly(ethyleneterephthalate) fibres for urea hydrolysis

This paper presents the results of urease immobilization onto methacrylic acid–acrylamide grafted poly(ethyleneterephthalate) fibres. The graft yield strongly affected the maximum activity of the immobilized enzyme up to a value of 70·2%. Higher grafting caused a decline in urease activity and led to the degradation of the fibres. The minor changes observed in K_m and V_max demonstrated that the conformational changes existed during immobilization were not extensive. However, 70·2% methacrylic acid–acrylamide-g-fibres containing urease were more stable towards acidic and alkaline pH, high temperature and storage conditions compared with free enzyme. Apart from the increase in stability to heat inactivation, the initial enzymatic activity of the urease–fibre system remained almost unchanged even after 40 repeated assays corresponding to 10 h of operation in 4 months, indicating the excellent durability of the system.