线切割CAD/CAM软件的研究与实现

研究开发了功能较完备，具有自主版权的高速走丝切割加工CAD／CAM软件，分析了该软件系统的结构及特点，讨论了建立工艺参数库，尖角加工处理，电极丝自动偏移补偿，文件格式转换等软件功能开发中的关键技术。     

乙烯直接氧化合成乙酸

用常规固定床反应器考察了Pd-SiW12/SiO2催化剂还原条件对乙烯直接氧化合成乙酸催化性能的影响。催化剂用H2在200－300℃还原后Pd 的分散度较高，其催化活性远高于肼在液相中还原的催化剂，在乙烯气相氧化合成乙酸反应的原料气中，适量1，2－二氯乙烷的存在有助于提高乙酸的选择性和时空产率，初步考察了Pd-Se-SiW12/SiO2催化剂连续206h运转的稳定性，结果表明，催化剂中Pd晶粒的长大和硅钨酸的流失是造成催化剂失活的主要原因。     

可编程序控制器在催化联锁系统的应用

随着工厂自动化程度的提高，对可编程控制器系统的可靠性要求越来越高，特别是炼油厂、化工厂、电站、钢铁厂以及环保项目中，停车将会给工厂带来的昂贵的代价。在这种情况下,冗余控制器能显著降低生产停滞的风险。简单介绍了可编程序控制器的冗余系统，并结合具体实例说明了冗余系统在其应用过程中的安全可靠性。     

Models and observations of fcc/bcc interfaces

Whereas models of the structure and periodicity of CSL or near CSL high angle grain boundaries are relatively well developed and have been to some extent verified by experiment, the nature of more general (e.g. fcc/bcc) interfaces is very imperfectly understood. One of the major differences between homo- and heterophase boundaries is the occurrence, in the latter case, of reproducible orientation relationships due to the crystallographic requirements of phase transformation (e.g. a glissile interface for martensitic growth, low energy interfaces for classical nucleation). A review is given of the relationships commonly observed to obtain between fcc and bcc crystals (as well as ordered phases based upon these structures). Within a given relationship, it is possible to use models of the available interfaces to predict their dislocation content; the success of the various approaches is considered. It is shown that the dislocation arrays identified on fcc/bcc boundaries are consistent with the occurrence of a primary structural relaxation, but that the latter does not appear to be complete. Possible reasons for this are discussed, together with the extent to which secondary structural models may be applicable. Attempts to rationalize the observed orientation relationships and morphologies are discussed, and it is pointed out that these all rely on searches for situations of minimum primary misfit, but that the way in which the latter is quantified determines the results of the analyses. Nevertheless, the implication is that the primary misfit does appear to determine the actual behaviour, though no structural or mechanistic conclusions can safely be drawn from this observation.     

新型模具钢012Al在深冷处理过程中的组织转变

本文利用x-射线衍射分析及复型和薄膜透射技术研究了012Al钢经淬火后在深冷处理过程中的组织转变。结果表明,淬火后的残余奥氏体在深冷处理过程中部分转变成马氏体;深冷处理使马氏体发生分解,析出超细碳化物;同时伴有形变晶孪产生。     

树状大分子/金属纳米复合物的制备与催化作用

综述了一类新的有机/无机杂化纳米材料———树状大分子/金属纳米复合物的制备及其催化作用。树状大分子/金属纳米复合物是以树状大分子为模板或稳定剂,通过还原树状大分子内或树状大分子间螯合金属离子制备。讨论了树状大分子/金属纳米复合物在水、有机溶剂、氟/有机两相溶剂和超临界CO2中的催化作用。     

AlSn20Cu/Steel双金属板(带)复合轧制过程的厚度匹配

通过对AlSn20Cu/Steel双金属板(带)复合轧制过程变形区变形规律的分析，确定了轧制过程的总变形率与各分层变形率的关系，解决了实际生产中各分层原料的厚度匹配问题。     

石油天然气长输管线用钢新进展

本文介绍了１９９０年以来国外在石油天然气长输管线用钢方面的最新成果，以获得较低的强度和韧性匹配为目的经轧后加速冷却工艺后的钢的强度的预测和控制；具有优良抗氢致裂纹的含硼、微碳、低硫、Ｎｂ－Ｔｉ微合金化、Ｘ６５－Ｘ８０级管线钢的开发，满足于特殊性能要求的ＴｉＯ处理技术及Ｘ８０级ＴｉＯ细化晶粒钢、低硬度和低屈强比钢，以及复合板加工耐腐蚀钢管的生产。     

涟钢连铸优质钢的实践分析

本文介绍涟钢第一炼钢厂１号小方坯连铸机浇铸优质钢的生产实践，并探索连铸优质钢的途径。指出为保证质量，必须严格保证钢水质量，控制合适的浇铸温度，拉坯速度和冷却强度；钢水必须吹氩；采用大容量中间包和伸入式水口保护渣浇涛，确保连铸机的状况良好。