�ݼ����߷����������Ϸ�

通过对J.J.Arps方程的推导,提出了油气藏产量递减曲线分析的最佳拟合法。用该法可直接求出递减指数N、初始递减率D1及油气递减前的稳定产量Qi,避免了使用试差法的大量运算过程,大大提高了油气藏工程中指标预测的精度。     

Structure and formation energy of steps on the GaAs(001)-2 × 4 surface

The energies of various steps on the As-terminated GaAs(001)-2 × 4 surface are evaluated using a novel, approximate method of “linear combination of structural motifs”. It is based on the observation that previous total energy minimizations of semiconductor surfaces produced invariably equilibrium structures made of the same recurring local structural motifs, e.g. tetrahedral fourfold Ga, pyramidal threefold As, etc. Furthermore, such surface structures were found to obey consistently the octet rules as applied to the local motifs. We thus express the total energy of a given semiconductor surface as a sum of (i) the energies _M of the local structural motifs appearing in the surface under consideration and (ii) an electrostatic term representing the Madelung energy of point charges resulting from application of the octet rule. The motif energies are derived from a set of pseudopotential total energy calculations for flat GaAs(001) surfaces and for point defects in bulk GaAs. This set of parameters suffices to reproduce the energies of other (001) surfaces, calculated using the same pseudopotential total energy approach. Application to GaAs(001)-2 × 4 surfaces with steps reveals the following. (i) “Primitive steps”, defined solely according to their geometries (i.e. step heights, widths and orientations) are often unstable. (ii) Additional, non-geometric factors beyond step geometries such as addition of surface adatoms, creation of vacancies and atomic rebonding at step edges are important to lower step energies. So is step-step interaction. (iii) The formation of steps is generally endothermic. (iv) The formation of steps with edges parallel to the direction of surface As dimers (A steps) is energetically favored over the formation of steps whose edges are perpendicular to the As dimers (B steps).     

Automated model generation for performance engineering of building automation networks

Large technical systems need to be designed both reliable and efficient. Specialized design tools offer therefore a simplified, abstract design and extend details autonomously in the background. Analytic and simulation based models could improve the quality by testing and dimensioning the design before implementation, but setting up the necessary models is time-consuming and expensive. Therefore many developers ask for analysis tools which are able to create their models from the available information in the design tools. This paper presents such an automated modeling approach basing on an existing design database at the example of a network analysis for building automation fieldbuses. The process of automated modeling is unfolded, and the potentials and limitations are discussed.     

Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.     

Degradation of polyethylene terephthalate films in the presence of lubricants for HFC 134a: a critical issue for hermetic motor insulation systems

Earlier studies conducted in the use of sealed tubes with polyalkylene glycol lubricants and polyethylene terephthalete (PET) films revealed that the PET films exhibited embrittlement and (visual) degradation. This led to an investigation of PET embrittlement mechanisms with the new lubricants used with HFC 134a. The lubricants studied were three polypropylene glycols (the monol, the diol and the completely end-capped glycols), pentaerythritol ester and a blend of monol and ester. The effects of moisture content, temperature and lubricant structure were studied. All lubricants in this study were of viscosity grade ISO-32 (150 SUS). The results were compared to PET film embrittlement in the presence of CFC 12 and mineral oil. This study reconfirmed the earlier findings that the PET films must be dried to lower than 0.1 wt.% moisture content for use in hermetic systems. This paper discusses the effect of the moisture content of the lubricant and the effect of the lubricant structure on PET films. The dependence of the various mechanisms on temperature is shown. Esters and end-capped polyalkylene glycols are recommended for use with HFC 134a.     

钱塘江光缆管穿越施工技术

钱塘江光缆管穿越长度2454.15m,穿越深度为32m,穿越中采用了多项新技术、新工艺、新方法。文章介绍了导向孔对穿技术、套管技术、水下磁场电缆铺设技术、长距离泥浆回流技术、长距离穿越钻杆组合技术在钱塘江光缆管穿越施工中的应用。     

油田单井平均日产油量经济极限确定方法

从f(n,t)曲线的研究出发,得到了求解油田单井平均日产油量经济极限值的数学方程式,介绍了用曲线交汇法求解的过程,分析了油田月递减余率和原油销售价是影响油田单井平均日产油量经济极限的主要因素。该方法在油田开发调整方案的编制和油田开发规划部署工作中将起到一定的作用。     

Postharvest Microbiology of Farm-reared, Tropical Freshwater Prawn (Macrobrachium Rosenbergii)

ABSTRACT: The microbiological quality of farm-reared, tropical freshwater prawn ( Macrobrachium rosenbergii ) stored at 2 different temperatures was studied. The prawn muscle was found to have the initial bacterial load of 10⁴ cfu/g. The lactics and vibrios were in the range of 10² cfu/g, while the E. coli , aeromonads, staphylococci, anaerobes, and molds were in the level of 10¹ cfu/g. Salmonella and Vibrio cholerae were present in the prawn muscle. The prawn muscle held at room temperature (28 ± 2 °C) was organoleptically acceptable up to 8 h, when the bacterial load was more than 10⁶ cfu/g. However, the prawn muscle stored at freezer temperatures (−10 to −15 °C) was found to be in acceptable condition even after 30 d of storage and the bacterial load was fluctuating in the range of 10³ to 10⁴ cfu/g.     

对硝基苯偶氮2-羟基萘-3-甲酰烷基胺系聚丙烯纤维用红色染料的合成及应用

本文将2,3-酸在甲苯溶剂中用氯化亚砜酰氯化合成2-羟基萘-3-甲酰氯,将其分别和正丁胺、正辛胺、正十二胺和正十八胺反应制得4种不同碳链长度的2-羟基萘-3-甲酰烷基胺,用对硝基苯胺重氮盐与其偶合分别制得了对硝基苯偶氮2-羟基萘-3-甲酰正丁胺、对硝基苯偶氮2-羟基萘-3-甲酰正辛胺、对硝基苯偶氮2-羟基萘-3-甲酰正十二胺和对硝基苯偶氮2-羟基萘-3-甲酰正十八胺系聚丙烯纤维用红色染料。熔点分别为189.8℃、96.2℃、115.8℃和108.1℃;热分解点分别为273.1℃、216.0℃、258.0℃和221.0℃;最大吸收波长分别为515.8nm、516.8nm、513.6nm和514.2nm。在染色条件下,4支染料在聚丙烯纤维上的上染率分别37.6％、41.8％、42.4％和44.7％。     

核电厂运行安全指标

本文着重介绍了 IAEA 所制定的核电厂运行安全指标,同时也介绍了美国所制定的类似指标。这些指标为定量地评估和比较各国核电厂运行安全提供了可靠的依据。