Corrosion-erosion resistance of Zn-Al co-cementation coatings on carbon steels in aqueous media

A novel Zn-Al co-cementation coating was obtained by a pack cementation method,This coating possesses a two-layered structure,The outer layer is mainly composed of Fe2Al3 and FeAl intermetallics with a small amount of Zn,and the inner layer consists of Zn,Fe and a small amount of Al.The corrosion-erosion resistance of Zn-Al con-cementation coatings on carbon steel was studied by a rotary corrosion method in various NaCl and H2S containing solutions and relevant SiO2 containing media,The experimental results are compared with those of carbon steels and the sherardizing and aluminizing coating ,showing that the Zn-Al co-cementation coating have excellent corrosion-erosion resistance in various aqueous media.     

基于SIP的网络视频监控系统*

介绍了初始会话协议SIP.在SIP和一般视频监控系统模型的基础上,提出了一种基于SIP的网络视频监控系统,给出了分层网络模型,并对其各功能模块的作用进行了重点阐述.该分层网络模型的建立使得构建数字化、网络化、智能化、多媒体化视频监控系统成为可能.     

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

A simplified two-dimensional model of two-layer porous burner based on pore level is developed.The heat transfer of solid phase in porous burner is seen as the synergistic effects of conduction through con-necting bridges and surface radiation between the solid particles in the model.A numerical simulation study on the characteristics of flow,combustion and heat transfer in the two-layer porous burner is car-ried out using the pore level model,and the effects of the control parameters such as the inlet velocity and solid thermal conductivity on thermal non-equilibrium are investigated.The results show that the flame structure is highly two-dimensional based on pore level.Obvious thermal non-equilibrium in the burner for the two phases and solid phase are observed,the largest temperature difference between the gas and solid phases is observed in combustion zone,while the temperature difference inside the solid particles is largest near the flame front.The results also reveal that thermal non-equilibrium of por-ous burner is much affected by the inlet velocity and solid thermal conductivity.     

NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

磁性纤维随机混合媒质等效电磁参数的计算

为计及强散射偶极子间的相互作用,引入参量εh和μh,利用广义多重散射理论及MATLAB计算机软件对在2 GHz～18 GHz频率下的体积占空比为8%的铁纤维随机混合媒质等效磁导率的实验值进行曲线的拟合,导出了耦合系数εh和μh,并在此基础上,对体积占空比分别为30%和20%的铁纤维随机混合媒质等效磁导率进行了计算,计算结果与实验吻合良好.     

CoCrPtNb／CrTi／C多层膜记录介质的制备和性能研究

采用CoCrPtNb四元合金作磁记录介质，并采用多层膜结构（CoCrPt）100-Nbx/CrTi／C／Glass制备玻璃盘基硬盘。实验结果表明：采用适宜厚度的籽晶层与合适组分的底层和磁性层的多层膜结构，即使在室温下溅射，此种薄膜磁记录介质也可得到高达260kA／m的矫顽力；在550℃高温下，经过30min真空退火后，其矫顽力有较大幅度提高，并在Nb含量为2．4％（原子分数）时达到极大值386kA／m，适用于高密度磁记录。同时，也详细分析了磁性层和底层组分、籽晶层厚度以及真空退火对磁记录介质磁性能和微结构的影响。     

PP／mPE／无机填料三元复合材料的形态结构和力学性能

采用刚性无机填料对茂金属聚乙烯（mPE)弹性体增韧聚丙烯（PP）二元共混体系进行增强，从而制得PP／mPE无机填料三元复合材料。分别探讨了CaCO3用量对复合材料拉伸性能和低温冲击性能影响，并考察了不同填料的增强效果。实验结果表明，由于弹性体的存在，无机填料的增强作用减弱；共混物的低温冲击强度也因填料的加入而大幅度下降，但经过表面处理的高岭土体系的冲击强度反而提高。SEM断裂形貌显示，未经表面处理的填料和基体的界面结合较弱，而改性高岭土则以层状结构分散于基体中，并呈现牢固的界面结合。     

低翘曲玻纤增强PET复合材料的制备和性能研究

依据降低翘曲的机理，选用不同降低翘曲的方法，制备了系列翘曲玻纤增强PET复合材料，结果表明，具有较高形状对称性的填料，如滑石粉，云母粉和玻璃微珠都能不同程度地降低玻纤增强PET体系的翘曲，非晶聚合物也能有效改进该体系的翘曲性能。     

补强剂和共混工艺对PA/PVC/NBR三元共混弹性体性能的影响

在选择三元共聚尼龙（PA）、聚氯乙烯（PVC）、丁腈橡胶（NBR）为主体材料，制备PA／PVC／NBR（10／30／60）三元共混弹性体的工作基础上，进一步探讨了填料品种和用量，共混温度，加料顺序等因素PA／PVC／NBR三元共混弹性体的影响。试验结果表明：在PA／PVC／NBR（10／30／60）共混体系中，补强型填料的补强效果优于非补强型的填料，6种填料补强效果依次是：快压出炭黑＞半补强炭黑＞白炭黑＞活性重质，CaCO3＞陶土＞滑石粉，快压出炭黑的适宜用量是20－50份。在制备PA／PVC／NBR三元共混物时，适宜的共混温度是122－140℃，并且采用二段法混工艺制得的共混物性能优于采用一段法共混工艺。     

莫莱石－堇青石滤料滤池在生产上的应用

本文对景德镇市黄泥头水厂进行了单层莫－堇滤料滤池和双层莫－堇－煤滤料滤池的生产性试验。试验结果表明：单层莫－堇滤池和双层莫－堇－煤滤池的周期产水量分别是单层砂滤池和双层砂－煤滤池的１．４倍和１．５倍，而且前两种滤池的出水水质优于后两种滤池。