Influence of the counter-ion on the effective charge of polyacrylic acid in dilute condition

Osmotic pressure measurements were satisfactorily used to compute the effective charge of poly(acrylic) acid (PAA) at different pHs and with different monovalent and divalent counterions. This experimental method is sensitive to the osmotically active species (polymer and counterions). After correction for the polymer contribution to the total osmotic pressure (solvency and excluded volume), the remaining pressure can be attributed to the polyelectrolyte counterions and processed with Donnan and equation of state in order to compute the effective charge number per polymeric chain (Z^eff). The behavior of Z^eff against the chain concentration and pH was investigated after neutralization of PAA with LiOH, NaOH, and TMAOH. The results clearly indicate that the nature of the monovalent counterion has no effect on Z^eff leading to the conclusion that the interaction between monovalent counterions and the acrylate functionality is purely electrostatic in agreement with conductimetric and potentiometric results reported in the literature. The behavior of Z^eff against the degree of ionization of the polymer and its concentration is also in good agreement with the theoretical expectations of the theory of ionic condensation. Osmotic measurements were also used in order to understand the influence of divalent cations (Mg²⁺, Ca²⁺, Ba²⁺) on Z^eff of the sodium salt of PAA at pH 9 and at different divalent/acrylate molar ratio. All the divalent cations depress Z^eff each of one at different degrees, confirming a specific divalent/polymer interaction. The energy of hydration of cations can explain most of the observed results with divalents.     

空气中烧成的镍导体及其应用

将空气中烧成的镍导体用于散热制冷片制作工艺中，可降低成本，提高合格率。通过实验得到的最佳值为：镍导体中４号玻璃（ＳｉＯ２＞３０，Ｂ２Ｏ３＞１０，ＰｂＯ＜５５，ＴｉＯ２少许）的含量４．５％，化学镀镍时间５０ｍｉｎ，方阻４７．５ｍΩ／□，附着力８．１Ｎ／ｍｍ２。     

油酸乙二醇单酯在基础油与水界面上形成吸附膜的研究

以油酸和乙二醇为原料，在酸性催化剂作用下，用硼酸间接酯化法合成了润滑油油性油酸乙二醇单酯，用界面张力仪测定了单酯含量的矿物油的界面张力。用量小二乘法求得油中油酸乙二醇单脂的浓度与油对水界面张力关系的回归方程。依据所求的回归方程和Ｇｉｂｂｓ公式计算出油酸乙二醇单脂在油与水界面上形成吸附膜时的最低浓度。     

热处理WO3电变色膜稳定性研究

采用电子束蒸发淀积ＷＯ３薄膜。根据已有的ＷＯ３薄膜脱水过程结论而选择适当温度对薄膜进行退火处理。在大量含水的和不含水的两类Ｌｉ＾＋电解质中进行比较性着色和消色循环实验，表明在２９０℃以下热退火处理能明显增加ＷＯ３薄膜在含水 电解质中的循环寿命。     

钛酸铅系薄膜的热释电性能及其应用

叙述了钛酸铅系薄膜的热释电原理，介绍了国际上近几年钛酸铅系薄膜材料、制备工艺及热释电性能，并与块状陶瓷材料进行了比较，分析表明钛酸铅系薄膜具有优良的热释电性能及可观的应用前景。     

Minimizing sample evaporation in the environmental scanning electron microscope

The ElectroScan environmental scanning electron microscope (ESEM) enables wet samples to be observed by eliminating air but allowing water vapour into the sample chamber. However, evaporation from, and condensation on, the sample may occur during the pumpdown sequence used to reach this state, which means that the sample may not be in its natural state when viewed if due care is not taken. In this paper, the pumping system of the ESEM is described mathematically and expressions are derived for the evaporation and condensation. This treatment is then used to calculate the optimum pumpdown sequence. The importance of using the optimized procedure is illustrated by micrographs of fat emulsions.     

Improvement of the optical properties of electrodeposited CuInSe2 thin films by thermal and chemical treatments

Cu, In and Se have been codeposited in thin films by potentiostatic one-step electrodeposition. The as-deposited material has shown direct optical transitions attributable to the CuInSe₂ semiconductor, but also additional absorption corresponding to another semimetallic phase. The secondary phases are selenium and copper selenide compounds which have been determined by composition measurements. In order to eliminate the semimetallic phases and to improve the semiconductor behaviour of the electrodeposited material, thermal and chemical treatments have been performed. After heat-treatment of the samples at 400°C in flowing argon, elemental selenium loss has been detected together with an enhancement of the allowed direct optical transition. The subsequent chemical etching of the layers in a KCN solution has showed to be successful in eliminating the copper selenide phases which were responsible of the remaining sub-bandgap absorption.     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

Ultrasound‐activated Knoevenagel condensation of malononitrile with carbonylic compounds catalysed by alkaline‐doped saponites

α,β‐Unsaturated nitriles have been synthesized by Knoevenagel condensation of a carbonylic compound with malononitrile, assisted by sonochemical irradiation. Two alkaline‐promoted clays (Li⁺‐ and Cs⁺‐exchanged saponites) have been employed as catalysts. The influence of the carbonylic compound (benzaldehyde or cyclohexanone) and the use of a solvent on the catalytic activity have been studied. Remarkable increase in the conversion values has been found when the reaction is activated by ultrasound, as compared with the thermal activation. In this green, solvent‐free procedure, α,β‐unsaturated nitriles have been produced in very high yields (97%) when the Cs⁺‐saponite is used as catalyst. Copyright © 2004 Society of Chemical Industry     

示波极谱滴定法测定工业氯化钙主要成份

在氯化铵-氨水(pH=11)支持电解质中用微银汞膜电极进行试验,锰、铁不干扰测定,用EDTA滴定氯化钙获得令人满意的结果。对三种样品进行分析,变异系数为0.08％—0.11％。该法快速准确,适用于氯化钙主要成份的测定。