关于最优等效替代法的实质及其应用条件的研究

本文研究了经济分析基本方法之一最优等效替代法的实质,系统地导出了被评价方案的绝对经济指标与相对经济指标的关系,并结合典型案例分析指出了该方法的应用条件,对正确进行建设项目的经济评价具有现实意义。     

液压胀形轧辊油槽深度的确定

对液压胀形轧辊（即国外的ＶＣ轧辊）辊套热装后的弹性变形进行了有限元分析，给出了确定油槽最小深度的计算公式。本文的有限元计算结果与实验结果吻合，某些结论可为液压胀形轧辊的结构设计提供理论依据。     

曲率圆弧段代替切线段的数值计算方法

为了确保安全,核工业和其它一些工业要求某些参数的计算值只能取正的相对误差且不大于5×10-3,这是它们对数值计算的基本要求.例如,反应堆带功率运行时,功率增长总是随时间上升,功率曲线是向下凹的.传统的龙格-库塔法计算值总是小于真实值,并且随着时间的增加,计算值越来越小于真实值.按计算值分析,反应堆是安全的,但实际上反应堆是不安全的.这对反应堆的安全极为不利.为此,本文开拓了一个全新的数值计算方法.与龙格-库塔法相比,该方法计算工作量小,与预测一校正法相比,该方法没有启动问题.更值得指出的是计算值高于真实值,这样,反应堆计算结果总是偏于安全的.     

不锈钢绕带容器环板与绕带端头的焊接

本文通过焊接试验对奥氏体不锈钢绕带容器环板与绕带焊接工艺进行了研究分析,并得出了合理的焊接方法和工艺参数。     

电站并联运行的不对称非线性振荡

本文给出一个结构不完全对称并联电网的等价定理,它把双输入双输出非线性耦合的微分方程组等价为单输入单输出的非线性微分方程,然后用渐近方法和谐波线性化方法求其一次近似解,得到一些新的物理性质,有助于合理选择电网结构,以提高其结构稳定性.     

A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

Stereo and motion correspondences using nonlinear optimization method

This paper presents a new approach for using stereo and motion correspondences to solve the problem of tracking multiple independently moving features. In this approach, quantitative relational structure (QRS) is proposed as a framework for the integration of stereo–motion correspondences. The similarity function, tightly coupled to stereo and motion cues, is constructed on QRS, and then energy function E² consisting of the similarity function is defined. The tracking problem can be converted into the maximization problem of the energy function E². The stereo and motion correspondences that maximize E² are recovered by applying an extended graduated assignment algorithm. The relaxation labeling method is also presented for the comparison with the proposed method. Experimental results are presented to illustrate the performance of the proposed method.     

图书馆管理策略的原则和方法

对图书馆管理策略和基本涵义及其地位与作用进行研究，探讨了科学制定图书馆管理策略的原则和方法。     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000