中温SOFC密封玻璃热稳定性研究

研究了一种热稳定性好的中温固体氧化物燃料电池密封玻璃. 研究表明, 此密封玻璃的热膨胀系数(室温～631℃)为9.8×10^-6/K, 与8YSZ电解质的热膨胀系数10.0×10^-6/K(室温～631℃)接近, 并且在700℃热处理300h后, 该密封玻璃的热膨胀系数几乎没有变化. 粘度实验表明, 玻璃在700℃下具有足够的刚性, 适合于运行温度在700℃左右SOFC的密封. 化学相容性的研究显示, 在700℃下与8YSZ反应300h后没有发现显著的界面反应.     

Preparation and structure of fluorinated/non-fluorinated polyacrylate gradient emulsion blend film

The emulsion blend method, which is environmentally friendly and energy saving, was used to prepare a compositional gradient film of fluorinated/non-fluorinated polyacrylate in this paper. The size and glass-transition temperature (T_g) of the emulsion particles were designed to enhance the driving force of their selective congregation and promote the formation of gradient structure. The structures and surface properties of the obtained films were characterized. The results showed that when the fluorinated components have much smaller particle size and higher T_g than those of fluorine-free polyacrylate components, the gradient structures formed in the direction across the film thickness of the films. The concentration of the fluorinated component increased gradually from film-glass interface to film-air interface in the blend film, making the surface free energies of the two sides of the gradient film distinctively different.     

Uniformity of gallium doped zinc oxide thin film prepared by pulsed laser deposition

Recently, transparent conducting oxide thin films have attracted attention for the application to transparent conducting electrodes. In this work, we evaluated the uniformity of electrical, optical and structural properties for gallium doped zinc oxide thin films prepared on the 10 × 10 cm² silica glass substrate by pulsed laser deposition. The resistivity, carrier concentration, mobility, bonding state and atomic composition of the film were uniform along in-plane and depth direction over the 10 × 10 cm² area of the substrate. The film showed the average transmittance of 81-87%, resistivity of 1.4 × 10^− 3 Ω cm, carrier concentration of 9.7 × 10²⁰/cm³ and mobility of 5 cm²/Vs in spite of the amorphous X-ray diffraction pattern. The gradual thickness distribution was found, however, the potential for large-area and low temperature deposition of transparent conducting oxide thin film using pulsed laser deposition method was confirmed.     

多弧离子镀与磁控溅射共沉积TiN/TiCN多层膜的高温抗氧化性能

TiN/TiCN多层膜的高温抗氧化性研究对于扩大其应用领域具有重要作用,但目前鲜见相关报道。采用多弧离子镀与磁控溅射技术以不同调制周期在304不锈钢表面共沉积TiN/TiCN多层膜。采用XRD、XPS、倒置显微镜及高温氧化试验研究了多层膜的高温抗氧化行为。结果表明:TiN/TiCN多层膜表面光滑平整、均匀致密,薄膜主要为具有Ti-(C,N)键的fcc-TiN结构;随着调制周期的减小,TiN/TiCN多层膜生长取向发生转变,且具有(111)晶面生长织构;随着氧化温度的升高,多层膜的显微硬度逐渐降低,氧化增重速率不断增大,且在700℃之后变化速率较快,薄膜的开始氧化温度约为750℃;随着调制周期的减小,多层膜TiN与TiCN界面层数量增多,促使晶粒细化,提高了其致密性,还隔断了缺陷贯穿薄膜的连续性,显著降低了薄膜的孔隙率,致使O原子扩散困难,增强了薄膜的高温抗氧化性能。     

Structural control of Fe-based alloys through diffusional solid/solid phase transformations in a high magnetic field

Abstract

A magnetic field has a remarkable influence on solid/solid phase transformations and it can be used to control the structure and function of materials during phase transformations. The effects of magnetic fields on diffusional solid/solid phase transformations, mainly from austenite to ferrite, in Fe-based alloys are reviewed. The effects of magnetic fields on the transformation temperature and phase diagram are explained thermodynamically, and the transformation behavior and transformed structures in magnetic fields are discussed.     

生猪屠宰中三段式冷却的制冷控制

对生猪屠宰中的3种冷却方式进行比较,针对三段式冷却工艺的关键控制点进行分析。在三段式冷却中需要避免出现由于冷却效果不佳造成的延迟冷却问题、温度过低问题以及由不恰当地设计和运行过程带来的额外质量损耗问题。为了获得良好的猪肉品质、减少额外损耗,除了满足猪胴体冷却负荷的设计要求、减小换热温差及确保风速外,精确稳定的温度控制和及时按需的热气除霜也是控制三段式冷却工艺有效工作的关键点。     

催化裂化火炬系统的一些改进措施

针对原长庆第一助剂厂小型催化裂化装置火炬系统阻火器易堵塞、点火器频繁失效、火炬易熄灭等问题,重新设计了阻火器阀组,采用"低位点火、阶梯引燃"的方法降低点火头的安装高度,用开有断续长条孔的不锈钢管对所有点火弯管火嘴和长明灯火嘴进行圈闭以起到挡风稳焰的作用.这些简单有效的改进,提高了火炬系统安全保障的可靠性.     

《标准电极电位数据手册》纠错若干例──兼与吴维昌商榷

对《标准电极电位数据手册》的若干错误进行了分析和订正。     

18万t/a中高压甲醇合成系统原始开车总结

介绍了18万t/a甲醇合成系统原始开车前的准备工作、开车过程及开车过程中触媒升温还原的注意事项,分析了原始开车过程中出现的主要问题,并介绍了相应的解决方法。     

乙烯裂解炉炉管失效原因分析

利用金相显微镜、X射线衍射仪、光谱分析仪等测试仪器,通过对炉管的材质、外观形貌、金相组织、组分组成等方面进行检测,分析了乙烯裂解炉炉管失效的原因.结果表明,材质为Incoloy 800 H合金的裂解炉管可满足乙烯裂解工况的工艺要求,炉管失效主要是由于高温过热引起的氧化腐蚀破坏所致,另外管内介质对腐蚀也有促进作用.