盐井水平对接钻井技术

钻一口通过主采盐层的水平井与已完成的直井对接，形成连通井(形如“U”字)，一口井注水溶解盐／芒硝矿，另一口井采出卤水，这是盐化工业对钻井提出的要求。针对水平对接盐井井身轨迹设计、着陆段、水平段的轨迹控制和连通技术，介绍了水平段侧钻时的钻井液技术。     

连铸钢坯质量的原位统计分布分析研究

采用原位统计分布分析技术得到与样品原位置相对应的数以万计原始信号并对其进行系统解析，实现不同质量连铸钢坯试样的疏松度、均匀度以及夹杂物含量的定量表征。准确计算了连铸钢坯试样疏松度、碳元素的最大偏析度。提出铸坯各原位置成分含量的权重比率方法用以表征材料的均匀度，并提供了统计分布允许差范围内（C0±R）所占权重比率以及权重比率为95%置信度时，中位值置信扩展率（K）等2种判断模式。该方法以测量信息的原始性、原位性及统计性为特征，反映了连铸钢坯较大尺度范围内各化学组成及其形态的定量统计分布规律。采用上述方法可以     

Numerical Study of a Modified Time-Stepping θ-Scheme for Incompressible Flow Simulations

In [Turek (1996). Int. J. Numer. Meth. Fluids 22, 987–1011], we had performed numerical comparisons for different time stepping schemes for the incompressible Navier–Stokes equations. In this paper, we present the numerical analysis in the context of the Navier–Stokes equations for a modified time-stepping θ-scheme which has been recently proposed by Glowinski [Glowinski (2003). In: Ciarlet, P. G., and Lions, J. L. (eds.), Handbook of Numerical Analysis, Vol. IX, North-Holland, Amsterdam, pp. 3–1176]. Like the well-known classical Fractional-Step-θ-scheme which had been introduced by Glowinski [Glowinski (1985). In Murman, E. M. and Abarbanel, S. S. (eds.), Progress and Supercomputing in Computational Fluid Dynamics, Birkh?user, Boston MA; Bristeau et al. (1987). Comput. Phys. Rep. 6, 73–187], too, and which is still one of the most popular time stepping schemes, with or without operator splitting techniques, this new scheme consists of 3 substeps with nonequidistant substepping to build one macro time step. However, in contrast to the Fractional-Step-θ-scheme, the second substep can be formulated as an extrapolation step for previously computed data only, and the two remaining substeps look like a Backward Euler step so that no expensive operator evaluations for the right hand side vector with older solutions, as for instance in the Crank–Nicolson scheme, have to be performed. This modified scheme is implicit, strongly A-stable and second order accurate, too, which promises some advantageous behavior, particularly in implicit CFD simulations for the nonstationary Navier–Stokes equations. Representative numerical results, based on the software package FEATFLOW [Turek (2000). FEATFLOW Finite element software for the incompressible Navier–Stokes equations: User Manual, Release 1.2, University of Dortmund] are obtained for typical flow problems with benchmark character which provide a fair rating of the solution schemes, particularly in long time simulations.Dedicated to David Gottlieb on the occasion of his 60th anniversary     

钻井液固相化学清洁剂ZSC-201的合成及性能

介绍了钻井液用固相化学清洁剂ZSC－201的室内合成及性能评价，结果表明，固相化学清洁剂ZSC－201具有较强的抑制性，可有效抑制粘土水化分散，保证钻井液清洁，在钻井液体系中与阴、阳离子型钻井液处理剂配伍性好，同时具有较好的抑制增效作用，在有效的加量内对钻井液滤矢量和流变性等影响小，固相化学清洁剂ZSC－201已在中原油田近30口井中应用，具有良好的推广应用前景。     

安棚深层系凝析气井射孔压井液技术研究

介绍了一种保护油气层的射孔压井液技术，该技术所用的配方具有低密度，低表面张力且具有较强的防膨能力等特点，在安棚深层系低孔低渗油田安3003等凝析气井作业中现场试验，解决了安棚深层系低压气井的水锁伤害等问题，对低孔低渗油气田作业入井流体的研究与应用具有较好的借鉴意义。     

Local Exact Particle Tracing on Unstructured Grids

For analyzing and interpreting results of flow simulations, particle tracing is a well established visualization method. In addition, it is a preliminary step for more advanced techniques such as line integral convolution. For interactive exploration of large data sets, a very efficient and reliable particle tracing method is needed. For wind channel experiments or flight simulations, large unstructured computational grids have become common practice. Traditional approachs, based on numerical integration methods of ordinary differential equations however fail to deliver sufficiently accurate path calculation at the speed required for interactive use. In this paper we extend the local exact approach of Nielson and Jung in such a way that it can be used for interactive particle tracing in large data sets of steady flow simulation experiments. This will be achieved by sophisticated preprocessing using additional memory. For further visual enhancement of the streamline we construct an implicitly defined smooth Bézier curve that is used for ray tracing. This allows us to visualize additional scalar values of the simulation as attributes to the trajectory and enables the display of high‐quality smooth curves without creating any visualization geometry and providing a good impression of the spatial situation at the same time. ACM CSS: I.3.3 Computer Graphics—Line and curve generation; I .3.7 Computer Graphics—Raytracing; G.1.2 Numerical Analysis—Spline and piecewise polynomial approximation     

钻井液振动筛叠层筛网透筛率的研究

从理论上详细论述了钻井液振动筛叠层筛网对固相颗粒分离的影响 ,首次提出用透筛率的概念定量地描述这一影响 ,并进行了实例计算。研究表明 ,当上下层筛网随机叠加时对透筛率的影响有以下几种情况 :(1)当上下层筛网开孔尺寸相除的余数为零 ,任意组合叠层筛网的透筛率分别为某一常数 ;(2 )上层筛网目数一定时 ,下层筛网目数越大 ,则透筛率越小 ;(3)上下层筛网的目数相差越小 ,透筛率越小 ;(4 )任意目数的上下层筛网随机叠加后 ,其透筛率仅在一个小范围内变化 ,因此任一叠层筛网有其固有的透筛率属性。     

阳平关砂金矿精选厂尾矿综合回收的研究

本文详细的介绍了陕西省阳平关砂金矿精选厂尾矿金和其他可利用的矿物综合回收方法和最佳分选流程。     

粉末材料中微夹杂缺陷的超声波检验

介绍了用超声波方法检测微夹杂缺陷的一些试验结果，比较了不同频率、不同试验方法检测能力的差异，并通过解剖试验对检出缺陷的性质、尺寸作了比较。     

钢中非金属夹杂物显微评级方法的定量化探讨

应用ＩＢＡＳ系列图像分析系统，对建立一套与国家标准ＧＢ１０５６１─８９兼容的钢中非金属夹杂物显微评级方法的自动化和定量化标准作了可行性分析，结果表明建立这套标准是切实可行的。