Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation

Magnetic flux leakage (MFL) testing is widely used to detect and characterise defects in pipelines, rail tracks and other structures. The measurement of the two field components perpendicular to the test surface and parallel to the applied field in MFL systems is well established. However, it is rarely effective when the shapes of the specimens and defects with respect to the applied field are arbitrary. In order to overcome the pitfalls of traditional MFL measurement, measurement of the three-dimensional (3D) magnetic field is proposed. The study is undertaken using extensive finite element analysis (FEA) focussing on the 3D distribution of magnetic fields for defect characterisation and employing a high sensitivity 3-axis magnetic field sensor in experimental study. Several MFL tests were undertaken on steel samples, including a section of rail track. The experimental and FEA test results show that data from not only the x- and z-axes but also y-axis can give comprehensive positional information about defects in terms of shape and orientation, being especially advantageous where the defect is aligned close to parallel to the applied field. The work concludes that 3D magnetic field sensing could be used to improve the defect characterisation capabilities of existing MFL systems, especially where defects have irregular geometries.     

Magnetic Flux Controllers for Induction Heating Applications

Application of magnetic flux controllers/concentrators to induction heating coils can drastically improve the process efficiency and heat pattern control. Presentation includes: benefits provided by flux controllers, materials available for controllers, application techniques, computer assisted design of induction coils with concentrators, examples of applications. Depending on induction system design, magnetic flux controllers can concentrate heating in a specified area,change heat source distribution and shield a particular part zone or external area preventing unintended eddy current heating.Besides of the coil efficiency improvement and optimal power distribution, magnetic flux controllers reduce the coil current demand from a supplying circuitry thus strongly reducing losses in busswork, cables, transformers and inverter components.Improvement that can be achieved due to magnetic flux controllers is case dependable. 2D and 3D computer simulation allows the designer to predict accurately effect of controllers on the coil parameters and temperature distribution and optimize the whole electromagnetic system. Special attention in presentation is paid to new magnetodielectric materials optimized for induction heating conditions. These materials have high magnetic permeability and saturation flux density,excellent machinability, good chemical and temperature resistance. Concentrators from these materials can work in a wide range of frequencies and specific powers. Examples of magnetic flux controller application include surface hardening of shafts and gears, induction surface hardfacing and brazing.     

釉上金红颜料的研制

采用液相反应法研制了釉上金红颜料，给出了颜料和熔剂配方及其制备方法。     

厌氧膜生物反应器在废水处理中的研究进展

厌氧膜生物反应器是一种处理高浓度有机废水的有效工艺.综述了厌氧膜生物反应器的特征,在工业废水处理中的应用以及低温下厌氧处理低浓度废水的效果,并展望了厌氧膜生物反应器的应用前景.     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3的析晶行为及助溶剂法生长

研究了0.91Pb(znl/3Nb2/3)O3-0.09PbTiO3(PZNT91/9,摩尔分数)在不同组分和配比熔盐中的析晶行为及其对晶体生长的影响。发现B2O3,PbF2等助溶剂不利于钙钛矿相的析出;而BaTiO3-PbO复合体系虽然能够促进钙钛矿相析出,但晶体析出量很少;只有适当比例的。PbO助溶剂比较适合于生长具有铁电性的钙钛矿相PZNT91/9单晶。助溶剂法生长的工艺参数为:溶质与PbO助溶剂的摩尔比为l:l,泡料温度1 150-1 200℃,泡料时间10 h,晶体生长时降温速度0.8-2℃/h,当温度降到900℃时停止生长,以50℃/h快速冷却至室温。所得晶体为琥珀色,最大尺寸达φ30 mm×15 mm,其压电系数和机电偶合系数分别为2000 pc/N和0.92。     

Regional mass flux balancing for controlling gentle soil remediation operations

Extraction of heavy metals by accumulating plants is a method which is currently in development for the "gentle" remediation of contaminated agricultural soils (phytoremediation, see [2]). Areal contaminant mass flux balances are basic criteria for the design of such remediations and their control. A framework for the integration of contaminant balances relating the field scale of remediation with the regional scale of soil monitoring networks is provided by the recently developed method PROTERRA [3]. The objective of the study presented in this paper was to test the suitability of PROTERRA for planning and monitoring gentle soil remediations. For this purpose we applied the PROTERRA method to the contaminated agricultural land in and around Dornach, Switzerland, to assess copper flux balances.The calculations showed that atmospheric deposition and the application of pesticides and manure are important pathways for the inputs of copper. The copper export with a special maize cultivar accumulating heavy metals would be about three times higher than the average metal export with crops. A moderate increase of sewage sludge application would lead to a substantial increase of the copper input. Decisions to remediate the soil should take the uncertainty of mass flux balances both on field scale as well as on regional scale into account. Therefore, an important need of further development of the PROTERRA method is the integration of uncertainty analysis on both scales.     

（Nb_yTi_（1－y））C_x单晶体制备及其结构研究

用熔剂法制备了（Ｎｂ＿ｙ．Ｔｉ＿（１－ｙ））Ｃ＿ｒ单晶体，用Ｄｅｂｙｅ照相法及四圆衍射仪对其晶体结构进行了研究。实验结果表明，（Ｎｂ＿ｙＴｉ￣（１－ｙ）Ｃ＿ｘ中存在类似于作化学计量化合物ＴｉＣ＿ｘ及ＮｂＣ＿ｘ的有序一无序转变现象，转变温度随其化学成份改变在１１７５～１２８０Ｋ范围内变化。高温型（Ｎｂ＿ｙＴｉ￣（１－ｙ））Ｃ＿ｘ的晶体结构属ＮａＣｌ型结构，碳空位呈随机分布；低温型（Ｎｂ＿ｙＴｉ￣（１－ｙ））Ｃ＿ｘ的晶体中碳空位呈短程有序分布，可用Ｖ＿６Ｃ＿５晶体结构模型进行描述。     

分离有机水溶液的聚离子复合膜（Ⅱ）

本文研究用聚离子昨合膜进行渗透汽化分离乙醇水溶液的特性，探讨了进料温度、浓度、膜后压力，进料液循环量等操作条件对膜分离性能的影响。     

挤出机头的热平衡分析及计算

建立了挤出机头的热开衡方程，并进行了分析和讨论。列出了方程中各个热通量计算公式，为挤出机头控制系统的设计提供了依据。