气固垂直并流向上两相流流体动力学模型

运用能量最小多尺度 (EMMS)模型 ,推导出滑移速度及颗粒速度的径向分布 ,并进一步计算了径向空隙率、流体速度、团聚物直径、流体对颗粒的悬浮输送能量和颗粒的质量流率等相关的动力学参数 .模型计算结果反映了气固垂直两相流的径向不均匀性 (稀、密两相共存 )及环 /核结构的存在 .计算值与实验结果相吻合 .滑移速度的计算结果表明在核心区内也存在着团聚物 ,并不是呈现单一颗粒运动形态 ,这与实验现象一致 .该模型不仅克服了原有EMMS模型求解困难的问题 ,而且其计算不依赖于核心区半径等任何待定参数 ,只需物性参数、床层截面平均空隙率和操作参数即可 ,方便了实际应用 .     

陶瓷地砖静摩擦系数试验方法研究

静摩擦系数是评价陶瓷砖防滑性能的重要指标。本文分析了两种陶瓷砖摩擦系数试验方法(中国标准GB/T 4100-2006附录M以及美国标准ASTM C1028-07)的异同点,对8类的陶瓷地砖进行了静摩擦系数测试和防滑性能评价。测试结果显示,两种方法的测试值存在差异,滑块橡胶类型不同是产生差异的主要原因。对于抛光表面,用水平拖拉法测得的静摩擦系数可能不能反映其真实的防滑性能,应采用其他合适的方法测试和评价其防滑性能。     

Preparation and characterization of multilayer Gd2O2S:Tb phosphor screen for X-ray detection application

Gd2O2S:Tb (GOS) phosphor screen, generally with a multilayer structure, has been widely used in digital X-ray imaging. GOS phosphor screen is fabricated via a slip casting route, which is an effective method to obtain multilayer composites with good strength. The GOS slurry was prepared using the menhaden oil, polyvinyl butyral and PEG-400 as dispersant, binder and plasticizer, respectively, and slip casted on a support layer. After the GOS scintillation layer is formed, a transparent polyethylene terephthalate film is covered on it as a protective layer. The X-ray excited emission spectra of the obtained GOS phosphor screen is well match to the spectral response of a-Si:H photodiode, and the spatial resolution was close to 3.7 LP/mm, which could meet the request of the commercial application.     

Making reusable reaction-bonded silicon nitride crucibles for silicon casting from kerf-loss silicon waste

Silicon kerf loss during wafer slicing and the broken quartz crucibles after silicon casting are two major solid wastes from photovoltaic (PV) industry. Especially, the recycle of kerf-loss silicon has become an urgent issue because near 100 000 t of solid wastes are generated every year. One of the most meaningful recycle routes of the kerf-loss silicon is to make silicon nitride crucibles to replace the quartz crucibles. In this study, we demonstrated how this is feasible through acid leaching refining, slip casting, and nitridation. The reaction-bonded silicon nitride (RBSN) crucibles after oxidation were found pure enough for silicon ingot growth. More importantly, they could be reused after ingot growth. With the present examples, the potential of using the kerf-loss silicon for fine ceramics is prominent.     

脱硫石膏热处理制备注浆成型模具

石灰石-石膏湿法烟气脱硫技术以石灰石为原料吸收烟气中的二氧化硫,得到石膏晶体。在控制二氧化硫排放的同时,脱硫石膏的处理与综合利用也非常重要。以脱硫石膏为原料,分析脱硫石膏的成分,通过热处理使其脱水,并表征热处理过程对石膏物理性能的影响。将热处理后的石膏用于石膏模具的制作,并最终制备固体氧化物燃料电池阳极支撑体。燃料电池测试的结果显示,脱硫石膏可以用于管式固体氧化物燃料电池的制备。     

刚性驱动轮在沙土上滑转下陷量的计算方法

本文从车轮与土壤相互作用关系入手,在对现有的实验和理论研究结果进行分析的基础上,应用土壤力学和塑性理论的基本原理,提出用接触面上的剪切应力分布特性来判断轮下土壤纵向流动破坏区域的大小,建立了在不同滑转率时刚性驱动轮下土壤纵向流动破坏区域的包络线方程及滑转下陷量的计算方法。     

整体式转向梯形机构的优化设计

引入影响汽车行驶转向性能的轮胎侧偏、悬架侧倾和,前轮定位等主要因素,建立了汽车整体式转向梯形机构的优化数学模型,从四个方面对梯形机构进行优化设计。通过对这些结果的分析对比,得出了具有实用价值的结论。     

Wall slip of molten polymers

There is considerable experimental evidence that the classical no-slip boundary condition of fluid mechanics is not always a valid assumption for the flow of high molecular weight molten polymers. In fact, molten polymers slip macroscopically at solid surfaces when the wall shear stress exceeds a critical value. Moreover, for linear polymers there exists a second critical wall shear stress value at which a transition from a weak to a strong slip occurs. These two modes of slip (weak and strong) are due to flow-induced chain detachment/desorption at the polymer/wall interface and to chain disentanglement of the polymer chains in the bulk from a monolayer of polymer chains adsorbed at the interface. In this review, the two physical mechanisms of slip are discussed and validated on the basis of published experimental data. The slip velocity of molten polymers is a complex function and has been reported to depend on wall shear and normal stresses, temperature, and molecular characteristics of polymers (molecular weight and its distribution). Proposed slip models, static and dynamic, are also reviewed and their significance on the rheology and flow simulations of molten polymers is discussed.     

赤泥催化剂的制备及其对模拟烟气中微量氨的脱除性能

以赤泥固废为原料，采用酸解-碱沉淀法制备了赤泥粉体催化剂，并提出一种将催化剂直接喷入SNCR尾气中的除氨工艺，考察了催化剂加入点温度、空速、NH₃浓度及水蒸气对氨去除能力的影响。研究发现，该催化过程具有很高的活性和N₂的选择性，450℃以上NH₃的转化率可达100%，同时在400～500℃间，N₂的选择性高于80%，达到了很好的除氨效果；在500℃，空速为3×10⁶~6×10⁶ h^-1之间时，出口NH₃浓度均为0；此工艺对于逃逸NH₃浓度的适用性较强，入口[NH₃] = 50×10^-6~1000×10^-6 mol/L范围内均可完全脱除，且具有一定的抗水能力。通过一系列表征发现，该种方法制备的赤泥催化剂不仅消除了原始固废的强碱性，还提高了其表面酸性，具有较高的比表面积、孔容和丰富的表面微观结构，使NH₃的吸附及活化反应能力大大增加；该催化剂过程遵循iSCR机理，在400～500℃温度区间主要发生NH₃-SCO反应，低于400℃主要发生NH₃-SCR反应，粉体催化剂通过NH₃-SCR和NH₃-SCO协同反应达到了去除尾气中微量氨的目的。