高性能纤维的弯曲疲劳断裂研究

在自制弯曲疲劳装置上 ,对 3种高强对位芳纶及超高相对分子质量聚乙烯纤维 (Dyneema SK65 )进行双面弯曲疲劳试验。结果表明 ,Twaron 2 0 0 0弯曲疲劳寿命的自然对数与预加应力、弯曲角度呈线性关系 ,Dyneema SK65弯曲疲劳寿命明显长于对位芳纶 ,Twaron 2 0 0 0 ,Kevlar 12 9相近 ,都比Kevlar 2 9略长 ;高强型对位芳纶的弯曲疲劳断裂断口芯层呈现出“毛笔头”或“拔丝形”原纤化分裂形态 ,超高相对分子质量聚乙烯纤维弯曲疲劳断裂断口有明显的脆性折断形态 ,无原纤出现。     

基于优进策略的遗传算法对重油热解模型参数的估计

针对常规遗传算法全局寻优效率偏低的弱点，提出了一种优进策略，用以改进常规遗传算法。该策略将从繁衍过程中获取进化信息，自适应地改进子代分布，适时引入确定性操作，以提高全局寻优性能。提出的相关技术包括维持种群的多样性、改进交叉算子、增加Powell寻优算子等。实例测试表明这种优进策略效果良好，并已成功地应用于重油热解三集总动力学复杂数学模型的非线性参数估计。     

Numerical Analysis of the Constrained Blister Test

The constrained blister test is investigated through finite element analysis to determine the applicabilities and the limitations of the new technique. Numerical results confirm that the strain energy release rate asymptotically approaches a constant value. These results also show that the test technique and the approximate solution for strain energy release rate are applicable for some practical cases.     

Electrodeposition of catalytically active nickel for the oxygen evolution reaction — effects of anionic composition

Nickel electrodes were prepared by electrodeposition in electrolytes of various anionic compositions. The deposition conditions and bath types were evaluated with special emphasis on the electrocatalytic properties for the oxygen evolution reaction (OER). Electrochemical characterizations in a 5 mol/L KOH solution at 25°C showed that the electrode deposited from the chloride bath, having a low Tafel slope of 50 mV/dec and an overpotential of 396 mV at 100 mA/cm², is the most catalytically active among electrodes prepared in electrolytes of various anionic compositions. The electrode activity for the OER is related to the real surface areas, which depend on the anion compositions in the deposition bath and the deposition conditions.     

高压大流量地下水隧道开挖超前帷幕注浆参数研究

锦屏水电站锦屏山隧道开挖中面临高压大流量地下水、且富水地段长(约占隧道全长的40%)的难题。为安全、可靠地进行隧道施工,以注浆材料的适应性、超前帷幕注浆的参数及工艺为研究对象,对浆液做了大量配合比试验,分析其流动性、物理力学性能和凝结时间。研究结果表明:用纯水泥进行单液浆帷幕注浆,其可注性好,可大大地提高注浆加固效果;纯水泥+双液浆对局部小的渗漏水具有很好的封堵效果。对于低于2 MPa的压力水,注浆压力取2~3倍的静水压力;对于高于5 MPa的压力水,注浆压力取净水压力加2~3 MPa。对于在2~5 MPa之间的压力水,注浆压力可灵活选取,但不宜超过7 MPa,注浆应采用孔内循环灌注的方式。地下水发生在断层破碎带时,超前帷幕注浆宜采用全断面帷幕;若出水段以溶蚀裂隙、断层、管道为主宜采用有针对性的局部超前帷幕注浆。该技术成功解决了锦屏山隧道高压大流量地下水封堵的难题,对富水地层地下隧洞施工具有重要参考价值。     

The effect of specific β‐nucleation on morphology and mechanical behavior of isotactic polypropylene

The commercial grade of isotactic polypropylene was modified by a specific β‐nucleating agent in a broad concentration range. The supermolecular structure of the specimens prepared by injection molding was characterized by X‐ray scattering and correlated with mechanical behavior. It was found that at a critical nucleant concentration of 0.03 wt % the content of the β‐modification virtually reaches a saturation level. With further addition of the nucleant, the β‐phase content increases only slightly. The long period passes through a distinct maximum at the same nucleant concentration. This singularity in structure remarkably correlates with a minimum of the yield stress and maxima of strain at break and fracture toughness. Such general behavior is also reflected in the correlation between the β‐phase concentration and fracture toughness profiles along the injection‐molded bars. It is suggested that in the critically nucleated material an optimum thickness of the amorphous interlayer with connecting chains between the β‐crystallites is established, rendering the material the highest possible ductility and toughness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1174–1184, 2002     

The effect of reaction conditions on montmorillonite-catalysed peptide formation

Oligomerization of glycine (gly) and diglycine (gly₂) on montmorillonite was performed as cyclic, drying-wetting process at temperatures below 100°C, under varying reaction conditions. The influence of substrate/clay ratio, temperature and pH was found to be different for amino acid (AA) dimerization, cyclic anhydride (CA) formation and peptide chain elongation. High temperatures and neutral pH favour CA formation over diglycine production. An AA/catalyst ratio of 0.2 mmol/g leads to optimal yields. This supports the assumption that amino acid dimerization and CA formation take place at the edges of clay particles. Peptide chain elongation, starting from gly₂, produces higher yields at higher temperatures and neutral pH.     

粗四氯化钛除钒工艺现状及进展

论述了海绵钛和钛白生产中四氯化钛精制除钒工艺生产现状和研究进展,从技术、经济和环保角度对几种主要的除钒方法进行了综合性的评价和探讨。