金属板料成形数值模拟的研究现状

本文对板料成形数值模拟的几个主要研究方向 :有限元算法、接触与摩擦、成形极限图、缺陷等的研究现状进行了介绍 ,并且讨论了板料成形数值模拟今后的研究方向     

液锻连挤硅线石粒子/铝复合材料的摩擦磨损行为

采用液锻连挤成形工艺获得了一种新型硅线石颗粒增强LY12铝基复合材料,其性能可与常规热挤压件媲美.摩擦磨损性能测试表明:硅线石颗粒增强铝基复合材料具有优良的摩擦磨损性能,且其耐磨性能随粒子体积分数增加而增加.材料经液锻连挤后,硅线石粒子在强大三向压应力作用下嵌镶于基体内,粒子很难拉脱,承受摩擦力的作用时,硅线石粒子起支承作用,粒子硬度高,故使复合材料整体耐磨性能提高.     

实用M2052合金阻尼行为表征

名义组分为Mn-20Cu-5Ni-2Fe(原子分数，％)的M2052合金，具有很高的强度和阻尼性能．对该合金在不同条件下的阻尼性能采用多种方法进行了表征．该合金的高阻尼态出现在一个临界温度以下，该温度可以通过改变组分和热处理来调整．合金的室温阻尼性能强烈地依赖于频率、应变振幅以及静载荷的大小．     

PVC基阻尼涂料的制备及其流变性能

以聚氯乙烯（PVC）为基体，对苯二甲酸二辛酯（DOTP）为增塑剂，与无机填料CaCO3、钙锌热稳定剂、乳化剂OP-10、润滑剂液体石蜡等复合改性制备PVC基阻尼材料，采用动态流变仪DHR、动态热机械分析仪DMA、扫描电镜SEM等对试样的性能和形态进行表征。运用正交设计探究各组分对性能的影响规律，结果表明，填料CaCO3和增塑剂DOTP比例对其阻尼性能影响最显著；当PVC: CaCO3: DOTP: OP-10比重为45: 33: 22: 2时，25℃时频率0.01～150 Hz范围内，tan δ最大值从0.497提高到0.604；剪切速率0.1 s-1时表观黏度为3738 Pa·s，剪切速率150 s-1时表观黏度为2.19 Pa·s，具有优异的抗流挂性与稳定性。通过LASD形态分析构建微观聚集态模型，提出刚性填料团聚-解团聚和聚合物微球变形对流变性能的作用机理，为LASD的持续研究提供技术思路和理论基础。     

新型无石棉摩阻材料用增强纤维研究进展

综述了近几年无石棉摩阻材料用增强纤维研究进展,介绍了摩阻材料在使用过程中的摩擦磨损机制,重点介绍了新型无石棉摩阻材料用增强纤维的研究成果。     

Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend

In this study, a kind of novel damping materials was prepared based on the blend of chlorinated butyl rubber (CIIR) and polyacrylate (PAc) synthesized by different molar ratio of butyl methacrylate and ethyl acrylate. Research results from experiments and analyses by employing DMA, TEM, and FTIR show that whether at a cocured system or noncocured system, it can be achieved to shift a loss peak of CIIR towards a higher temperature region and to keep the damping value from markedlly decreasing, which broadens the effective damping function area of CIIR to the vicinity of ambient temperature. In the former system, the thermodynamical miscibility of CIIR and PAc, to some extent, is predominated by the molecular design of PAc, while in the latter system, covulcanized networks play a more significant role in improving compatibility and abating the peak split, though the suppression effect of thermal stress on the transition of CIIR T_ll transition still can not be neglected. Furthermore, transition state derived from the cocuring CIIR and PAc cannot make the phase separation completely take place, and consequently results in the deformation of phase morphology of the cocured CIIR/PAc blend. It is the influence of thermodynamics miscibility and forced compatibility in different size that makes the suppression effect of foreign PAc on CIIR T_ll transition be controllable. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3127–3133, 2006     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

超高分子量聚乙烯纤维/有机玻璃复合材料摩擦磨损性能研究

用真空浸渍法成功制备出了超高分子量聚乙烯纤维／有机玻璃(UHMWPE／PMMA)复合材料，并对基体材料PMMA，单向超高分子量聚乙烯纤雏／有机玻璃复合材料以及三维编织超高分子量聚乙烯纤维／有机玻璃(即UHMWPE3D／PMMA)复合材料的摩擦磨损性能进行了研究。实验证明UHMWPE／PMMA复合材料具有优良的摩擦磨损性能。经过纤维增强的复合材料的摩擦磨损性能优于基体材料，三维编织纤维增强的复合材料其磨损远小于单向纤维增强的复合材料，但其摩擦系数没有显著变化。     

几种工程塑料摩擦磨损性能的分析与比较

对聚甲醛，尼龙1010和聚四氟乙烯三种工程塑料的摩擦磨损性能进行了测试，分析和比较了它们不同截荷及不同对磨时间的摩擦磨损性能。