Dissipative Particle Dynamics Simulation: A Review on Investigating Mesoscale Properties of Polymer Systems

Polymer systems have typical multiscale characteristics, both in space and time. The mesoscopic properties of polymers are difficult to describe through traditional experimental approaches. Dissipative particle dynamics (DPD) is a simulation method used for solving mesoscale problems of complex fluids and soft matter. The mesoscopic properties of polymer systems, such as conformation, dynamics, and transport properties, have been studied extensively using DPD. This paper briefly summarizes the application of DPD to research involving microchannel flow, electrospinning, free-radical polymerization, polymer self-assembly processes, polymer electrolyte fuel cells, and biomedical materials. The main features and possible development avenues of DPD are described as well.     

矿床技术经济评价

简要介绍了矿床技术经济评价中的评价阶段及条件。论述了评价的原则、方法和要素。指出在技术经济评价中 ,地勘费是否计入投资 ,对评价的结果影响甚大     

An experimental evaluation of the effects of ripple current generated by the power conditioning stage on a proton exchange membrane fuel cell stack

In this article, an impedance model of the proton exchange membrane fuel cell stack (PEMFCS) is proposed. The proposed study employs an equivalent circuit of the PEMFCS derived by the frequency response analysis technique. An equivalent circuit for the PEMFCS is developed to evaluate the effects of ripple currents generated by the power-conditioning unit. The calculated results are then verified by means of experiments using a commercially available PEMFCS. The relationship between ripple current and fuel cell performance, such as power loss and fuel consumption, is investigated. Experimental results show that the ripple current can contribute up to a 6% reduction in the available output power. This paper was presented at the Fuel Cells: Materials, Processing, and Manufacturing Technologies Symposium sponsored by the Energy/Utilities Industrial Sector & Ground Transportation Industrial Sector and the Specialty Materials Critical Technologies Sector at the ASM International Materials Solutions Conference, October 13–15, 2003, in Pittsburgh, PA. The symposium was organized by P. Singh, Pacific Northwest National Laboratory, S.C. Deevi, Philip Morris USA, T. Armstrong, Oak Ridge National Laboratory, and T. Dubois, U.S. Army CECOM.     

HVOF喷涂NiCr-Cr3C2过程中Laval管壁结瘤成因的探讨

围绕超音速火焰喷涂NiCr-Cr3C2涂层时在Laval管内壁产生结瘤的问题，在分析结瘤产物显微结构的基础上探讨了形成结瘤的原因。研究发现，结瘤产物具有层状组织结构，说明结瘤的形成机制与涂层形成机制相似；在HVOF喷涂时，导致Laval管内壁结瘤的原因主要包括：喷涂材料、喷涂粉末颗粒粒度、喷涂工艺参数、Laval管的内表面粗糙度。     

挤出工程和挤出理论发展史研究

在回顾挤出工程和挤出理论发展历史的基础上,作出了4点结论与建议。明确地提出要坚决打破我国存在的树脂及材料工业、制品加工工业和塑机制造工业等行业界限,根据当前知识经济时代的特点,坚持走依靠自我力量技术创新、产学研相结合的道路。     

Electrocatalysis of oxygen reduction on a carbon supported platinum-vanadium alloy in polymer electrolyte fuel cells

The electrocatalysis of the oxygen reduction reaction (ORR) on carbon supported Pt:V 1:1 catalyst in polymer electrolyte fuel cells (PEFC) was investigated. At an oxygen pressure of 1 atm results indicate a lower electrocatalytic activity for the ORR in the presence of vanadium. However, at an O₂ pressure ≥2 atm an enhanced electrocatalytic property of PtV/C compared with Pt/C is revealed. This result indicates the occurrence of a different electrocatalytic mechanism for the ORR on Pt/C and PtV/C. An increase of mass transport overpotentials is observed for the PtV/C catalyst, and this was related to the presence of vanadium oxide. Indeed, XRD analysis revealed that only about 30% of V present in the catalyst is alloyed with Pt, forming a face centred cubic (fcc) Pt₃V solid solution. A thermal treatment at 850 °C under reducing atmosphere leads to the formation of an ordered fcc Pt₂V phase. After this, the ORR activity of PtV/C at O₂ pressure 1 atm is higher than that of Pt/C.     

火花点燃式发动机压缩比与数字计数器读数的校正关系

采用压缩比与数字计数器的对应检索校正关系来评定检查火花点燃式发动机的机械状况。根据沿海不同地区室内室间实验室的对比与协调试验计算分析，所采用的检索法达到美国沃克夏机器制造厂规定的ASTM精度。本文提出的检索法具有快速、简捷和准确等特点，可适用于沿海地区火花点燃式发动机的机械设备状况校准试验。     

Internally humidified polymer electrolyte fuel cells using water absorbing sponge

Polymer electrolyte fuel cell (PEFC) mounted with two strips of polyvinyl alcohol (PVA) sponge is presented and the effect of operating conditions on the cell performance is investigated. Mounting the sponge wicks is advantageous for the humidification of dry inlet air and for the removal of liquid water in the cell. It was found that dry inlet hydrogen could be internally humidified by water diffusion from the cathode to anode when operating in a counterflow mode. The results show that the relative humidity of the inlet gases could have little effect on the performance of the cell mounted with two sponge wicks under certain operating conditions. At a cell potential of 0.5 V, the current densities of the sponge-mounted PEFC operated with dry air are 5% and 31% higher than those of the conventional one without wicks operated with saturated and dry air, respectively. The molar percentage of water vapor to total water exiting the cathode (R_gas) is an important parameter to gauge the cell performance with dry gases. A very large R_gas may cause the membrane dehydration and subsequently a low cell performance.     

中国化石能源生产的生命周期清单(Ⅰ)--能源消耗与直接排放

化石能源生产的生命周期清单不仅是开展化工产业及其产品生命周期分析的基础,也能阐明化石能源生产的基本环境行为.通过计算得到了2002年我国原煤、原油和天然气开采过程中直接相关的能源消耗和污染物排放,涉及到的污染物排放包括液态污染物、固体废弃物和CO2、SO2、NOx、CO、CH4、烟尘等气态排放物.     

发展循环经济解决辽宁老工业基地的环境问题

在介绍循环经济的内涵和发展的基础上 ,结合辽宁省的环境问题 ,提出了只有通过大力发展循环经济 ,才能尽快解决辽宁省的结构性、区域性环境污染问题