乙醇电氧化的研究进展

简要地叙述了国内外乙醇电催化氧化的研究进展，着重介绍不同电极材料对乙醇电氧化的影响及目前所提山的机理，并对其可能的研究方向提出了建议。     

Highly active lanthanum doped nickel anode for solid oxide fuel cells directly fuelled with methane

Lanthanum doped nickel and YSZ composite anode (LaNi–YSZ) exhibited a greatly reduced polarization resistance and high performance for electrochemical oxidation of hydrogen and methane, which resulted from a fine anode structure with a high dispersion of nickel catalyst and a high catalytic activity towards methane.     

燃气加臭设备与臭剂的选择

介绍了城市燃气加臭设备的要求和工艺流程，并讨论了臭剂的要求与选择原则。     

FH-5A 加氢精制催化剂的研制

为适应加工高硫馏分油的需要，研制成功了加氢精制催化剂FH－5A。该剂以含硅氧化铝为载体、Mo-Ni为活性组分，并添加少量助剂而制得。FH－5A工业放大催化剂在氢分压3．4MPa、空速2．5h^-1、反应温度350℃的加氢条件下在小型装置处理伊朗催化裂化柴油和沙特轻质直馏柴油的混合油（30：70），可将原料油中硫含量由9000μg/g，氮含量由432μg/g降至47μg/g。评价试验表明，FH－5A加氢精制催化剂可满足中东高硫直馏柴油、二次加工柴油及其混合柴油加氢精制的需要。     

燃料电池质子交换膜的研究进展

本文从质子交换膜的发展入手 ,指出全氟磺酸型质子交换膜是目前最适合燃料电池的膜材料 ,并对其结构特点及优缺点进行了重点分析 ,论述了目前质子交换膜的发展趋势     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.     

汽车燃料质量发展新趋势

从现在到21世纪初,汽车燃料质量主要按照减少排气污染的思路来设计。汽油和柴油的发展趋势是:低硫、低芳烃、低90％馏出温度和高清净性。     

Catalytic steam reforming of methane over La0.8Sr0.2CrO3 based Ru catalysts

La_0.8Sr_0.2CrO₃ based Ru catalysts were studied as potential new anodic materials for Solid Oxide Fuel Cells directly fed with methane and operating at intermediate temperature under water deficient conditions. Two kinds of materials very close in composition were obtained following two different preparation procedures. Catalyst samples were characterized by physicochemical methods (XRD, SEM, BET and Chemical Analysis) and studied in methane steam reforming under water deficient conditions. Carbon formation during catalytic testing was studied by temperature programmed oxidation (TPO). Both types of catalysts were found very active and resistant to carbon formation. The unusual oscillatory behavior of the catalytic activity observed for one type of catalyst was discussed.     

Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application

The formation of a low Cr-volatility and electrically conductive oxide outer layer atop an inner chromia layer via thermal oxidation is highly desirable for preventing chromium evaporation from solid oxide fuel cell (SOFC) metallic interconnects at the SOFC operation temperatures. In this paper, a number of ferritic Fe–22Cr alloys with different levels of Mn and Ti as well as a Ni-based alloy Haynes 242 were cyclically oxidized in air at 800 °C for twenty 100-h cycles. No oxide scale spallation was observed during thermal cycling for any of these alloys. A mixed Mn₂O₃/TiO₂ surface layer and/or a (Mn, Cr)₃O₄ spinel outer layer atop a Cr₂O₃ inner layer was formed for the Fe–22Cr series alloys, while an NiO outer layer with a Cr₂O₃ inner layer was developed for Haynes 242 after cyclic oxidation. For the Fe–22Cr series alloys, the effects of Mn and Ti contents as well as alloy purity on the oxidation resistance and scale area specific resistance were evaluated. The performance of the ferritic alloys was compared with that of Haynes 242. The mismatch in thermal expansion coefficient between the different layers in the oxide scale was identified as a potential concern for these otherwise promising alloys.