GNSS工程控制网坐标系挂靠问题探讨

分析了工程测绘中出现投影变形的原因及消除投影变形的常用方法。论述了挂靠坐标系的建立方法和应用条件,挂靠坐标系既能有效抵偿基线投影变形,又能解决两种坐标系统的衔接问题,为控制网计算、地形图测绘、工程图与万分图拼接、施工测绘提供了极大的便利。     

Towards high accuracy calibration of electron backscatter diffraction systems

For precise orientation and strain measurements, advanced Electron Backscatter Diffraction (EBSD) techniques require both accurate calibration and reproducible measurement of the system geometry. In many cases the pattern centre (PC) needs to be determined to sub-pixel accuracy. The mechanical insertion/retraction, through the Scanning Electron Microscope (SEM) chamber wall, of the electron sensitive part of modern EBSD detectors also causes alignment and positioning problems and requires frequent monitoring of the PC. Optical alignment and lens distortion issues within the scintillator, lens and charge-coupled device (CCD) camera combination of an EBSD detector need accurate measurement for each individual EBSD system.This paper highlights and quantifies these issues and demonstrates the determination of the pattern centre using a novel shadow-casting technique with a precision of ∼10 μm or ∼1/3 CCD pixel.     

An introduction to the Information Display Measurement Standard 1, the first display measurement standard from the International Committee for Display Metrology

On June 1, 2012, the Information Display Measurement Standard version 1 was released. This is the first standard from the worldwide standard group, the International Committee for Display Metrology, a standards committee within SID, and it culminates several years worth of development from many contributors at various levels. It has 26 top‐level chapters and a total over 450 sections of all parts, including over 200 measurement sections and 8 appendices that cover 133 topics of display metrology, tutorials, technical discussions, and references. Herein is an overview of the Information Display Measurement Standard version 1, including the structure of the document, tips, tricks, and hidden features, how it is maintained, support material, a breakdown of its contents, and finally, a sampling of four of the over 200 measurements. The standard is available as a free download and can be found on the International Committee for Display Metrology home page — http://www.icdm‐sid.org .     

3D靶标的摄像机三步标定算法与实现

摄像机标定是计算机视觉中的一个必不可少的重要环节,其标定精度影响着三维重建结果的精度。利用摄像机对一个三维正交的棋盘格拍摄一幅有效靶标图像,提取角点,第一步通过透视变换矩阵算法线性求解各内外参数;第二步引入径向和切向畸变,将第一步求得的内外参数作为初始值,求得畸变系数的解;第三步对内参数进行线性优化,得到更为精确的内参数值;最后求解反投影后图像坐标的绝对误差。实验结果表明,该方法具有较高的精度,且简单有效。     

机器视觉中摄像机标定Tsai两步法的分析与改进

为提高摄像机标定精度,本文在分析Tsai两步标定法优缺点的基础上,提出了一种新的标定方法。该方法针对面阵CCD摄像机,建立新的综合畸变模型,并运用两步迭代法逐步逼近精确解,取消了Tsai两步法中对摄像机镜头只有径向畸变的限定,可用于多种复杂的镜头畸变情况。改进的方法只使用一平面标定板和单幅图象,操作简便,相比Tsai两步法中无法用平面标定板直接求解全部标定参数而言是一个突破。实验结果表明,改进方法速度快且精度较高,可广泛应用于机器视觉研究、工业三维测量等多个领域的摄像机标定。     

基于保真数据的花样定制算法

不失真地优化并扩展自主电子花样机花样格式NTP,结合优化后的花样格式NTPS及传统NTP花样定制算法,研究针距不变时花样不失真定制的原理与方法,设计并实现了基于NTPS的保真花样定制算法。实验结果表明,该算法较原有算法更好地解决了花样定制时的失真问题,已成功应用于电子花样机花样设计软件“兰花花v1.0”中。     

虚拟膝关节镜手术中保持单元质量的体网格形变方法

在虚拟膝关节手术中,需要对膝关节进行大范围形变的实时模拟。本文针对四面体网格的膝关节模型,提出了采用LSD度量建立形变能量,然后将带约束的最优化问题转化为不带约束的最优化问题,最后通过带Armijo线性查找的非精确牛顿法求解最优化问题。在求解过程中,通过预估未知点的位置,减少迭代步数,提高了算法的效率。这种方法具有较好的保体积性,同时保证形变后的四面体网格不出现体元翻转和退化。该方法也能推广应用于其它类似的关节弯曲运动的变形中。     

Digital‐to‐analog converter with gamma correction on glass substrate for TFT‐panel applications

Abstract— Low‐temperature polysilicon (LTPS) technology has a tendency towards integrating all circuits on glass substrate. However, the poly‐Si TFTs suffered poor uniformity with large variations in the device characteristics due to a narrow laser process window for producing large‐grained poly‐Si TFTs. The device variation is a serious problem for circuit realization on the LCD panel, so how to design reliable on‐panel circuits is a challenge for system‐on‐panel (SOP) applications. In this work, a 6‐bit R‐string digital‐to‐analog converter (DAC) with gamma correction on glass substrate for TFT‐panel applications is proposed. The proposed circuit, which is composed of a folded R‐string circuit, a segmented digital decoder, and reordering of the decoding circuit, has been designed and fabricated in a 3‐μm LTPS technology. The area of the new proposed DAC circuit is effectively reduced to about one‐sixth compared to that of the conventional circuit for the same LTPS process.     

Complex radial basis function networks trained by QR‐decomposition recursive least square algorithms applied in behavioral modeling of nonlinear power amplifiers

In this article, we propose a novel complex radial basis function network approach for dynamic behavioral modeling of nonlinear power amplifier with memory in 3 G systems. The proposed approach utilizes the complex QR‐decomposition based recursive least squares (QRD‐RLS) algorithm, which is implemented using the complex Givens rotations, to update the weighting matrix of the complex radial basis function (RBF) network. Comparisons with standard least squares algorithms, in batch and recursive process, the QRD‐RLS algorithm has the characteristics of good numerical robustness and regular structure, and can significantly improve the complex RBF network modeling accuracy. In this approach, only the signal's complex envelope is used for the model training and validation. The model has been validated using ADS simulated and real measured data. Finally, parallel implementation of the resulting method is briefly discussed. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

An application of PSO technique for harmonic elimination in a PWM inverter

Harmonic elimination problem in PWM inverter is treated as an optimization problem and solved using particle swarm optimization (PSO) technique. The derived equation for computation of total harmonic distortion (THD) of the output voltage of PWM inverter is used as the objective function in the PSO algorithm. The objective function is minimized to contribute the minimum THD in the voltage waveform and the corresponding switching angles are computed. The method is applied to investigate the switching patterns of both unipolar and bipolar case. While minimizing the objective function, the individual selected harmonics like 5th, 7th, 11th and 13th can be controlled within the allowable limits by incorporating the constraints in the PSO algorithm. The results of the unipolar case using five switching angles are compared with that of a recently reported work and it is observed that the proposed method is effective in reducing the voltage THD in a wide range of modulation index. The simulated results are also validated through suitable experiments.