NUMERICAL SIMULATION OF CONTROLLING IN TITANIUM ALLOY SHEETS WELDING RESIDUAL STRESS BY TRAILING PEENING

It is a promising and new technology to apply welding with trailing peening to control welding stress and distortion of titanium alloy. Numerical simulation of conventional welding and welding with trailing peening of the titanium alloy sheet is carried out, using nonlinear finite element theory and the engineering analysis software MARC. The result shows that welding with trailing peening technology reduces longitudinal residual stress in welding joint effectively, and it is more effective to reduce residual stress to peen the weld than to peen the weld toe. It is a effective result that other technolooy and method used in welding can never achieved.     

An Advanced Oscillation Mixing Method for Improving the Cooling Uniformity in Quenching

In quenching, the cooling uniformity is most important to diminish distortion occurring on work pieces. As a trial to accomplish uniform cooling, therefore, there exist various mixing methods of a quenchant and the quenchant circulation with an external pump has so far been the well accepted mixing method. However, this study proposes an advanced oscillation mixing method that can improve more the cooling uniformity in quenching. The proposed method includes a stirrer in oscillating motion, so that the simultaneous oscillating and mixing movements of the stirrer are considered to provide efecfively the uniform cooling characteristics for the quenchant. In comparison with the case of the circulation pump mixing, the investigation using the oscillation mixing method has demonstrated the following two experimental facts:(1) the short vapor blanket stage caused by the quick breakage of the oil vapor blanket and (2) the reduced variation of the quenching distortion.     

蒸汽轮机自带冠静叶隔板瞬时焊接变形研究

在实际生产中发展蒸汽轮机的自带冠静叶隔板焊接后节圆径向变形过大，严重影响了静叶隔板通流尺寸的精度。深入研究自带冠静叶隔板的焊接变形对于提高整个机组的效率具有重要的意义。本研究针对蒸汽轮机自带冠静叶隔板生产过程中产生的焊接变形过大问题，通过对蒸汽轮机自带冠静叶隔板进行现场跟踪监测，获得了实际生产中的瞬时焊接变形数据，根据监测数据对自带冠静叶隔板的节圆直径变形、半径变形、节圆收缩率和倾斜变形进行了全面分析，提出了优化和减小焊接变形的设计及工艺措施。     

65Mn钢弹簧支撑的热处理工艺改进

改进对弹簧支撑热处理工艺，增加工艺孔，使用新的淬火挂具，采用表面喷砂处理，解决了工件热处理后硬度不均匀，外形变化及其表面不清洁的问题。     

Effects of distance between arc and heat sink on stress and distortion in DC-LSND welding technology

The characteristics of temperatures, stresses and strains fields have been studied numerically for a titanium alloy sheet welded with an improved gas tungsten arc welding method, in which a trailing spot heat sink is introduced to control the welding stress and distortion. The impinging jet model is employed to describe the internee heat transfer between the cooling media and the top suufuce of the workpiece. The influcnee of the distance between arc and heat sink is investigated. Results show that there is an ideal range of distance. Using the ideal distance, a low stress and no distortion welding structure can be derived.     

焊接过程三维应力变形数值模拟研究进展

焊接非平衡加热、冷却过程导致产生焊接应力与变形，严重影响焊接过程及结构的服役行为，是焊接结构生产制造过程中必须解决的关键技术问题之一。作者对目前国内外焊接过程中焊接应力与变形的数值模拟研究及工程应用进行了分析。结合研究小组的研究工作，对大型复杂结构焊接过程中三维焊接应力变形数值模拟存在的困难、需要解决的主要技术问题进行了评述，并介绍了几个工程应用实例。     

外缘内曲翻边毛坯尺寸的计算

通过对外缘内曲翻边应力应变状态的分析,导出了预测变形区的变形和对毛坯尺寸进行修正的解析式,经与有限元数值模拟和实验结果对比,证实该公式有较高的精度,可以用于确定毛坯尺寸。     

大型薄壁组焊椭圆封头尺寸及变形的控制工艺

叙述了在压力容器制造中,当简体组装、封头分片压制后,焊接大型薄壁椭圆封头,其尺寸和角变形量的控制工艺。     

New development in welding thin-shell aluminum alloy structures with high strength

From the viewpoint of welding mechanics, two new welding methods-welding with trailing peening and welding with trailing impactive rolling were introduced. For aluminum alloy thin-shell structures with high strength, welding will lead to hot cracking, poor joint and distortion. In order to solve them, trailing impactive device was used behind welding torch to impact the different positions of welded joints, thus realizing the welding with free-hot cracking, low distortion and join tstrengthening. By use of impactive rolling wheels instead of peening heads, the outlook of welded specimen can be improved and stress concentration at weld toes can be reduced. Equipment of this technology is simple and portable. It can used to weld sheets, longitudinal and ring-like beams of tube-like structures, as well as the thin-shell structures with closed welds such as flanges and hatches. So the technology has the wide application foreground in the fields of aviation and aerospace.     

基于遗传算法的箱型结构焊接顺序优化

基于遗传算法原理,建立了箱型结构热-机耦合非线性三维优化仿真模型,以焊接变形为目标函数,进行了焊接顺序数值仿真优化.通过仿真计算优化结果与试验数据比较,证明所提出的优化方法与热-机模型结合是可行的,对于给定的焊接条件,通过选择合适的目标函数,采用遗传算法可以确定最优焊接顺序.这为针对工程具体问题设计焊接工艺提供了可靠的依据.