摆动滚子从动件盘形凸轮的CAD动画设计与加工

在AutoCAD基础上利用速度瞬心进行摆动滚子从动件凸轮机构轮廓曲线的CAD动画设计,同时可以生成刀具中心的加工轨迹、计算出压力角,能够实现CAD/CAM一体化,是一种简捷实用的新方法,可以直接应用于生产实际和教学.     

软包装标牌模具的设计和加工

分析了零件的工艺特点 ,介绍了此类软包装高速冲模的结构 ,以及模具中的计数装置、凸模上吹气卸料和收料装置 ,并对该模具的加工工艺做了详细的介绍     

An investigation of laser-assisted machining of Al2O3 ceramics planing

Laser-assisted machining (LAM), an alternative method of fabricating difficult-to-machine materials, uses primarily laser power to heat the local area (without necessarily evaporating or melting any material) before the material is removed. It not only efficiently reduces the cutting force during the manufacturing process but also improves the machining characteristics and geography with regard to difficult-to-machine materials, especially structural ceramics.This study on the application of laser-assisted machining to Al₂O₃ ceramics examines the measurements of cutting force and workpiece surface temperature as well as surface integrity and tool wear. Specifically, it uses the lattice Boltzmann method (LBM) to calculate the temperature distribution inside the ceramic workpiece during the LAM process and ensure that the laser energy causes no subsurface damage. The experimental results reveal that the LAM process efficiently reduces the cutting force by 22% (feed force) and 20% (thrust force) and produces better workpiece surface quality than conventional planing.     

An investigation of ultrasonic-assisted electrical discharge machining in gas

This study focuses on using ultrasonic to improve the efficiency in electrical discharge machining (EDM) in gas medium. The new method is referred to as ultrasonic-assisted electrical discharge machining (UEDM). In the process of UEDM in gas, the tool electrode is a thin-walled pipe, the high-pressure gas medium is applied from inside, and the ultrasonic actuation is applied onto the workpiece. In our experiment, the workpiece material is AISI 1045 steel and the electrode material is copper. The experiment results indicate that (a) the Material Removal Rate (MRR) is increased with respect to the increase of the open voltage, the pulse duration, the amplitude of ultrasonic actuation, the discharge current, and the decrease of the wall thickness of electrode pipe; and (b) the surface roughness is increased with respect to the increase of the open voltage, the pulse duration, and the discharge current. Based on experimental results, a theoretical model to estimate the MRR and the surface roughness is developed.     

加工中心程序编辑器的设计与实现

讨论了一种数控系统中程序编辑器的设计方法.简单说明该数控系统的系统结构,根据ANC_45M加工中心的需求和系统的设计原理,着重阐述编辑器字符的输入处理和程序段的查错、容错和格式化处理的设计原理和具体实现算法.该编辑器具有操作简单,运行速度快等优点.     

电火花加工与加工中心的集成

提出了一种新的复合型机床——在加工中心上进行电火花加工的机床，研究了电火花加工与加工中心集成所存在的主要技术要求，提出并设计了伺服控制系统，介绍了伺服控制系统的原理。为验证这个想法的合理性，在普通的铣床上进行了模拟集成试验并进行了分析与评价。     

用CAXA电子图板求解冲模压力中心

在模具设计中 ,冲裁模压力中心通常采用解析法或图解法求解。本文提出一种用CAXA绘图软件在设计制图时直接求解的方法 ,快速直接 ,简单方便 ,精度较高。     

增压柴油发动机排气门盘部断裂分析

利用金相及扫描电镜对增压柴油机排气门盘部断裂原因进行了分析。分析结果表明，21－4N网不适合做高热负荷发动机排气门材料；排气门的锻造流线必须符合气门外形轮廓，不得存在截断和大角度弯曲等缺陷。     

Q235B H型钢冷弯开裂原因分析

利用宏观检验、化学成分分析、力学性能测试及金相检测等方法对Q235B H型钢冷弯开裂试样进行分析。结果表明:在冷弯试验过程中,粗大的条状塑性夹杂物和点链状脆性夹杂物与基体的结合性较差,冷弯过程中夹杂物脱落或周围应力集中形成空隙或显微裂纹,随着受力状态的加强导致裂纹扩张形成冷弯开裂的裂纹源,在开裂过程中带状组织和加工痕迹加剧了裂纹的扩大。     

Feedrate optimization and tool profile modification for the high-efficiency ball-end milling process

Trend in die/mold machining is to produce highly quailed surface using the high-speed hard machining with the ball-end cutter. The ball-end milling is, however, less efficiency than the flat end milling. It is important to optimize the feedrate that gives the maximum material removal rate constrained by an allowable surface roughness. The state-of-art of the CBN ball-end cutter technology allows increasing the tooth feed for high-speed and high-efficiency machining. However, because the spherical shape of the cutter can result in the scallop-liked cusps on the machined surface, the surface roughness consideration makes a feedrate limitation to the CBN cutter. In this paper, the optimization of the feedrate by considering the generated-scallop effect of the ball-end cutter has been studied. It was found that the tooth feed must be kept within one third of the path pick in order to keep the feed-interval scallop height not over the path-interval scallop height. Therefore, the potential capability of the CBN cutter for the larger tooth feed (i.e. high efficient) machining can not be fully exploited. It was found a notch-cut on the center of the ball-end cutter reduced the feed-interval cusp height, thus allowing an increased feedrate of more than 50% compared with the standard ball-end cutter. If the parameters of the notch-cut profile can be optimized, it is believed that the feedrate can be further increased.