城轨交通运行图自动编制及优化系统的研究

地铁列车运行图是地铁运输中十分重要的组成部分,它是地铁行车组织的工作计划和工作基础。将列车运行图自动编制及优化系统分为数据库子系统和运行图调图子系统两部分,阐述了整个系统的框架结构及其优化算法,给出了开发结果。     

平行轴外啮合齿轮同向传动的可行性研究

传统的平行轴外啮合斜齿轮在啮合传动过程中,两齿轮的转动方向是相反的.通过对渐开线斜齿轮齿廓啮合特点的分析,表明平行轴外啮合斜齿轮可实现同向传动.并建立实现同向传动齿轮的正确啮合及连续传动条件.     

移动式塔机行走机构传动齿轮的有限元分析

本文在Pro/E 2001中建立了某移动式塔机传动系统低速级齿轮啮合的三维实体模型,倒入ANSYS中,选用SOLID45、TARGE17和CONTA174三种单元进行网格划分,建立其啮合接触模型。对塔机的额定工况进行接触分析,得到其应力分析规律。     

小模数齿轮及其滚刀齿形参数化设计软件研究

小模数仪表圆弧齿轮是仪器仪表等精密机械中最主要的传动部件之一，其齿形参数相对较复杂，因此相应的共轭滚刀齿形计算也较复杂和繁琐，给实际应用带来困难。阐述了以Visual AutoLISP的应用工具为载体，结合DCL语言开发用户界面，以AutoCAD2004为平台，开发小模数仪表圆弧齿轮及其滚刀齿形的参数化设计软件的方法，编制了相应程序，极大地简化了小模数仪表圆弧齿轮及其滚刀的设计计算，有利于提高设计效率及精度。     

轮齿干涉分析

通过数学计算有效的检测出齿轮副轮齿之间的干涉，并对避免干涉常用的设计准则的可靠性进行了评价。     

Fatigue assessment of tilting bogie frame for Korean tilting train: Analysis and static tests

This study has assessed fatigue strength of bogie frame for Korean tilting train. For evaluation of the loading conditions, multi-body dynamic analyses have been carried out. And, strength analysis has been performed by finite element analyses. From these analyses, stress concentration areas were investigated. A total of 25 strain gauges were placed on these areas and static tests were performed. Based on the fatigue assessment, it was clear that the bogie frame satisfied structural safety.     

An equivalent uniaxial fatigue stress model for analyzing landing gear fuse pins

We study the biaxial stress state conditions in landing gear fuse pins in the fuse groove. This biaxial state comprises a combination of shear stresses which are usually the largest stresses in the fuse pin by design, and compressive stresses which keep the half-section of the fuse pin in equilibrium. Conventional fatigue analysis techniques use an equivalent uniaxial stress, based on the Mises stress of a pure-shear condition. The respective predicted fatigue damages are much higher than those obtained from fuse pin cyclic tests. A new equivalent uniaxial fatigue stress model is proposed that includes the additional compressive stress as a relief on the fatigue damage in the fuse groove, thereby explaining the observations from fuse pin tests. The model is used in conventional uniaxial strain-life fatigue software (Goodrich Aerospace’s Fatigue Life V2) to predict the fatigue damage on a landing gear fuse pin with a sample load spectrum. The results are then compared to the pure shear model, and to a biaxial finite element fatigue analysis. As compared to the equivalent Mises model, the proposed model provides less conservative estimation of the fuse pin fatigue life, the latter value being higher than that provided by the two-dimensional finite element calculation. __________ Translated from Problemy Prochnosti, No. 3, pp. 85–98, May–June, 2006.     

直线同步电机动子位置检测方法研究

准确、可靠的转子位置检测是磁场定向控制同步电机系统运行的必要条件。针对高速磁浮列车用长定子直线同步电机的特点,提出了一种基于电感式传感器和DSP的电机动子位置检测新方法。介绍了电感式传感器的硬件结构及其实现电机齿槽信号的检测原理,阐述了DSP获取动子位置的计算方法。分析了检测精度和检测误差,并提出了几点改进措施。在高速磁浮列车定位测速试验系统中的实验表明,该检测方法的检测精度达到对应长定子直线同步电机线圈周期的3o,满足高速磁悬浮列车运行控制的要求。     

渐开线圆柱蜗杆斜齿轮传动试验分析

圆柱蜗杆斜齿轮传动是在传统的蜗杆蜗轮传动中用斜齿轮取代蜗轮而形成一种新的蜗杆．传动形式．采用机械传动试验台对蜗杆斜齿轮传动与蜗杆蜗轮传动进行传动效率的比较试验，通过结果分析了圆柱蜗杆斜齿轮传动代替蜗杆蜗轮传动中的可行性．     

精确建模的双圆弧齿轮有限元分析

圆弧齿轮是凹形齿廓与凸形齿廓之间的啮合，具 有承载能力强、润滑性能好、加工方便等优点，广泛应 用于石油、煤炭、钢铁等行业.但在使用中，也暴露了其 噪音较高、动力性能较差的缺点，并阻碍了进一步的推 广应用.所以对其进行受力变形分析显得极为重要，而 精确建模却是进行