甲基葡萄糖甙（MeG）水溶液工艺改进试验

介绍了用５次以上的母液生产ＭｅＧ水溶液工艺的改进试验。     

葡萄糖-6-磷酸和果糖-6-磷酸的酶法测定

在血液、发酵液或组织液中加入磷酸葡萄糖异构酶（ＰＧＩ，ＥＣ．５．３．１．９）、６－磷酸葡萄糖脱氢酶（ＧＤＨ，ＥＣ．１．１．１．４．９）及还原型辅酶Ⅱ（β－ＮＡＤＰ），利用快速、准确的酶法检测Ｄ－６－磷酸葡萄糖和Ｄ－６－磷酸果糖浓度。对该法的专一性、精确性、准确性以及误差来源及消除方法作了讨论。对其它物质的分析作了探讨     

纤维素酶活性测定的生物传感器研究

用TiO2凝胶包埋葡萄糖氧化酶电化学传感器(GOD/TiO2)测定纤维素酶(CE)的活性,即基于电极对纤维素水解后生成葡萄糖的催化氧化。考察了各种实验条件对CE酶活性测定的影响。实验表明,GOD/TiO2电极检测电位为+0.50Vvs.SCE,稳态响应电流与纤维素酶活性在10～300U/L之间有线性关系,该方法可用于微量羧甲基纤维素酶活性测定。     

Effect of puerarin on the P13K pathway for glucose transportation and insulin signal transduction in adipocytes

To explore the effect of puerarin on insulin receptor (IR), insulin receptor substrate-1 (IRS-1) and protein expression of protein kinase B(PKB) in the P13K pathway of the glucose consumption, transportation and insulin signal transduction in 3T3-L1 adipocytes with insulin resistance. The insulin resistance 3T3-L1 adipocytes model was established by free fatty acid induction. The model cells were managed with puerarin in different concentrations. Glucose consumption was detected with glucose oxidase method, glucose transportation rate was determined by 2-deoxy-3H glucose ingesting method, and the IR, IRS-1 and PKB expression were determined by Western blot. Glucose consumption and transportation were significantly decreased in the model adipocytes, but increased after treated with puerarin (P<0.01). Moreover, the level of tyrosine phosphorylation of IR subunit β was higher in the puerarin treated groups, and that of IRS-1 was higher in the group treated with low dose puerarin than that in the model group. The 3T3-L1 adipocytes of insulin resistance model could be induced by free fatty acid successfully, puerarin could promote the glucose utilization in them to alleviate the insulin resistance, which may be related with the action in advancing the tyrosine phosphorylation of IR and IRS-1.     

基于空心微针阵列的连续监测葡萄糖传感器

研制了一种基于空心微针阵列并可微痛刺入皮下实时连续监测人体血糖浓度的葡萄糖传感器.微针阵列由等间距的三根微针组成,分别作为工作电极、辅助电极和参比电极,其中工作电极与辅助电极采用表面溅射了Ti/Pt的空心不锈钢微针来制作,采用戊二醛-牛血清白蛋白交联法将葡萄糖氧化酶固定并仅置于作为工作电极的针尖通孔处;参比电极采用Ag/AgCl实心微针制作.测试结果表明:葡萄糖浓度在0～21 mmol·L-1范围内传感器输出电流为线性,灵敏度为0.575 μA/(mmol·L-1),响应时间为16s,且具有很好的抗干扰性.     

基于小波去噪的神经网络软测量在血糖浓度估计中的应用

由于皮下间隙液葡萄糖的易测性和测量过程中传感器感染血液的低风险性, 皮下间隙液一直是血糖监测的首选位置. 但皮下间隙液葡萄糖浓度的变化总是滞后于血糖浓度的变化, 而且测量过程中会引入噪声, 不能准确地估测血糖值, 针对这一问题提出了一种基于小波去噪的神经网络软测量方法. 该方法先对与血糖相关的一些辅助变量进行去噪处理, 然后用来训练神经网络, 建立血糖软测量模型. 通过对1号、2号成年人采集的仿真数据进行实验, 结果表明, 运用该方法得到的测量结果比皮下间隙液葡萄糖值具有更小的均方根误差、更好的信噪比、以及更小的测量延时.     

基于STC单片机的便携式快速血糖仪的设计与实现

介绍一种基于电流型生物传感器——葡萄糖氧化酶电极和STC单片机STC12C5410AD的微功耗便携式快速血糖测试仪。详细说明了血糖检测仪的工作原理、各模块的硬件电路及主程序工作流程,并给出了温度测量与实时时钟电路。仪器测试范围为1.1~33.3mmol/L;变异系数CV不大于3%;测试时间小于5 s;历史记录存储量180组;测试温度范围为10~45℃,具有自动温度补偿校正功能。     

Data-enabled learning and control algorithms for intelligent glucose management: The state of the art

External insulin administration is an effective way for patients with diabetes mellitus to regulate their blood glucose. Multiple daily injections (MDIs), sensor-augmented pump (SAP) and artificial pancreas (AP) are widely adopted approaches in insulin therapy. With the increasing popularity of continuous glucose monitoring (CGM) sensors, a large number of data-enabled learning and control algorithms have been developed for MDI, SAP and AP. In this paper, we perform a systemic review concerning the state-of-the-art methodologies that are developed for MDI, SAP and AP with feedback from CGM data or other available data, from a systems and control perspective. The review characterizes the traditional learning and control methods developed for the MDI, SAP and AP, including run-to-run control, proportional–integral–derivative control, fuzzy logic control and model predictive control, as well as the discussions on the roles of machine learning technologies in MDI, SAP and AP. Finally, potential future directions on the algorithm architecture design, a unified control framework for MDI, SAP and AP algorithm design and practical usage of the MDI, SAP and AP are discussed.     

Immobilization of Pt Nanoparticles via Rapid and Reusable Electropolymerization of Dopamine on TiO2 Nanotube Arrays for Reversible SERS Substrates and Nonenzymatic Glucose Sensors

Inspired by mussel‐adhesion phenomena in nature, polydopamine (PDA) coatings are a promising route to multifunctional platforms for decorating various materials. The typical self‐polymerization process of dopamine is time‐consuming and the coatings of PDA are not reusable. Herein, a reusable and time‐saving strategy for the electrochemical polymerization of dopamine (EPD) is reported. The PDA layer is deposited on vertically aligned TiO₂ nanotube arrays (NTAs). Owing to the abundant catechol and amine groups in the PDA layer, uniform Pt nanoparticles (NPs) are deposited onto the TiO₂ NTAs and can effectively prevent the recombination of electron–hole pairs generated from photo‐electrocatalysis and transfer the captured electrons to participate in the photo‐electrocatalytic reaction process. Compared with pristine TiO₂ NTAs, the as‐prepared Pt@TiO₂ NTA composites exhibit surface‐enhanced Raman scattering sensitivity for detecting rhodamine 6G and display excellent UV‐assisted self‐cleaning ability, and also show promise as a nonenzymatic glucose biosensor. Furthermore, the mussel‐inspired electropolymerization strategy and the fast EPD‐reduced nanoparticle decorating process presented herein can be readily extended to various functional substrates, such as conductive glass, metallic oxides, and semiconductors. It is the adaptation of the established PDA system for a selective, robust, and generalizable sensing system that is the emphasis of this work.