A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

测定环境中钚的新方法

提出了ＴＯＰＯ萃取，大面积有机相制原与平行板屏栅电离室α谱仪结合，测定草、土壤等环境中钚的新方法。土壤和草灰的化学回收率分别为７２％和９７％，最低探测限为４×１０＾－２Ｂｑ／ｋｇ。分析了Ｉ－ＡＥＡ和ＮＩＳＴ的标准物质，结果与标准值相符。操作程序简单、快速，适用于核事故应急分析和环境监测。     

A frame-based knowledge representation model and its mapping to nested relations

The first part of this paper introduces the basic constructs of a frame representation model and gives a formal definition for them. Subsequently the nested relational model (NF²) is described as an extension of the classical relational model to support relation-valued attributes. In the second part of this paper both models are compared with each other and a mapping of frame representation structures to NF² structures is specified. The structural similarities between frames and NF² relations are made clear and it is shown that their main difference is due to the type polymorphism introduced by the concept hierarchy of the frame model. This causes type collisions to occur in the strictly typed NF² model when frames are directly mapped to NF² structures. Two solutions to this problem are suggested and compared. The paper concludes with a reformulation of query operations of the frame model in terms of NF² algebra operations.     

Satellite SAR Remote Sensing of Great Lakes Ice Cover,Part 2. Ice Classification and Mapping

During the 1997 winter season, shipborne polarimetric backscatter measurements of Great Lakes (freshwater) ice types using the Jet Propulsion Laboratory C-band scatterometer, together with surface-based ice physical characterization measurements and environmental parameters, were acquired concurrently with Earth Resource Satellite 2 (ERS-2) and RADARSAT Synthetic Aperture Radar (SAR) data. This polarimetric data set, composed of over 20 variations of different ice types measured at incident angles from 0° to 60° for all polarizations, was processed to radar cross-section to establish a library of signatures (look-up table) for different ice types. The library is used in the computer classification of calibrated satellite SAR data. Computer analysis of ERS-2 and RADARSAT ScanSAR images of Great Lakes ice cover using a supervised classification technique indicates that different ice types in the ice cover can be identified and mapped, and that wind speed and direction can have an influence on the classification of water as ice based on single frequency, single polarization data. Once satellite SAR data are classified into ice types, the ice map provides important and necessary input for environmental protection and management, ice control and ice breaking operations, and ice forecasting and modeling efforts.     

用于安全稳定控制的高压直流极闭锁判据

交直流并联运行电网中直流极闭锁后引起的安全稳定问题十分突出，如何正确判别直流极闭锁是安全稳定控制系统研究中的重要课题。采用数值仿真方法分析了直流极闭锁对电力系统稳定的影响，指出稳定控制装置必须正确、快速地判出不同形式的直流极闭锁。通过研究直流极闭锁的电气量特征以及直流控制保护系统的动作行为，提出了可靠的直流极闭锁综合判据，并进行了详细的阐述。通过介绍中国南方交直流混联电网安全稳定控制系统核心部分———高肇直流输电安全稳定控制系统，进一步论述了研究直流极闭锁判据及直流极闭锁后稳定控制的重要性。     

网格计算及其应用

网络计算给互联网带来了新的活力，它是一种新型的分布计算技术，致力于解决复杂度很高的新应用问题，文中简述了网格计算的定义、体系结构、关键问题、当前几个有代表性的网格系统以及网格应用实例，并分析了风格计算发展趋势。     

新闻直播系统中字幕机备份及应急处理实例

简单介绍新闻直播系统中字幕机的接入方法、备份机制、数据共享以及应急处理方案。     

网格技术在广播电视中的应用

网格是继Internet和Web技术之后的第三个信息技术浪潮。简述了网格的定义、特点和基本体系结构 ,并且分析了网格技术在广播电视中的应用     

计算机自动绘制光学零件图的软件系统的研制

介绍了计算机光学零件图自动绘制软件系统的功能，给出了用该软件完成的光学零件图图样，对程序设计过程中的难点及处理方法也进行了详细阐述。     

数字测图,数字制图及勘测设计一体化

简述引用瑞得软件建立数字化成图系统，以进一步实现测量与工程设计一体化，使得繁琐的作业过程变为简单，缩短作业时间，不断提高生产作业效率。