Design Methodology of the Structure of Postal Express Mail Networks of Aviation Channels in China

1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｏｒｄｅｒｔｏｉｍｐｒｏｖｅｔｈｅｑｕａｌｉｔｙｏｆｐｏｓｔａｌｓｅｒｖｉｃｅａｎｄｔａｋｅａｄｖａｎｔａｇｅｏｆａｕｔｏｍａｔｅｄｍａｉｌｓｏｒｔｉｎｇｅｑｕｉｐ ｍｅｎｔｓ,ｉｔｈａｓｂｅｅｎｄｅｔｅｒｍｉｎｅｄｔｏｃｏｎｓｔｒｕｃｔｔｈｅｐｏｓｔａｌａｒｅａｃｅｎｔｅｒｏｆｆｉｃｅｓｙｓｔｅｍｉｎＣｈｉｎａＰｏｓｔａｌＳｅｒ ｖｉｃｅ (ＣＰＳ) .ＴｈｅｃｒｕｘｏｆｔｈｅｐｒｏｂｌｅｍｆａｃｅｄｂｙＣＰＳｉｓｔｏｒｅｄｅｓｉｇｎｔｈｅｐｏｓｔａｌｃｏｍｍｕｎｉｃａ…     

REHEATING TEMPERATURE CONTRAST AND MICROSTRUCTURES OF 7075 Al ALLOY CAST BY LIQUIDUS SEMI-CONTINUOUS CASTING

In this study, reheating of liquidus semi-continuous cast billets of 7075 Al alloy was carried out in a resistance furnace, and the temperature contrast of the outer and the center of the reheated billets was investigated, then the reheating microstructures were investigated. Results show that: the difference of temperature between the outer and center is small and the difference of their microstructures are also small. During reheating at 576℃ the spheroidization of grains is significant after 5min and no rosettes are visible after 20min by optical microscopy. Similar observations were madeon materials reheated at 596℃, but the ripening process is faster. The grains growup to 30-60μm, fine enough for thixoforming.     

工艺条件对薄片陶瓷材料凝胶流延成型的影响

利用有机单体的聚合原理，成功进行了陶瓷薄片材料的凝胶流延成型。讨论了工艺条件对成型的影响。使用惰性气氛保护克服了单体聚合反应中的氧气阻聚问题，浆料在一定温度和气氛条件下能够顺利完成聚合反应。所成型的坯体具有良好的强度和柔韧性，在1550℃经2h烧结，烧结样品显微结构均匀，没有发现晶粒异常长大现象，烧结体致密度达到97．7％。     

圆钢锭浇铸工艺试验

在不同锭型钢中A1含量及S含量、浇铸温度及浇铸时间等试验工艺条件下,对模铸20管钢、φ450mm、2.1t(圆波浪形)钢锭裂纹率的影响进行了分析与讨论,并确定了主要工艺参数。     

连续铸造技术的发展概况及展望

回顾国内、国外连续铸造技术的发展概况；指出开发和完善“近终形连铸”、“单晶连铸”、“高效连铸”、“连铸坯热送热装”等技术和基于连铸技术研制新型材料是连铸技术发展的主要方向。     

洁净钢生产技术初探

主要论述钢的洁净度与其性能之间的关系,以及近年来国内外主要钢厂生产洁净钢控制钢中杂质元素[C、S、P、N、H、O]技术的进展,为鞍钢纯净钢的生产提供有益的借鉴.     

IFP连续重整新一代催化剂再生技术的改进

介绍了我国引进的采用法国石油研究院 (IFP)三代催化剂连续再生技术的重整装置 ,分析了第二、第三代技术在原有基础上的改进 ,从再生气循环回路、再生操作参数和再生器内部结构三个方面重点介绍了第三代催化剂连续再生技术的特点和优势 :使催化剂的烧焦气循环回路与氧氯化用气、焙烧气循环回路彼此分开 ,烧焦、氧氯化、焙烧的操作参数可分别得到优化 ,使氧氯化及焙烧在高氧条件下进行 ,有利于催化剂金属的再分散 ,保持催化剂的活性。     

Development of ultra light magnesium-lithium alloys

Magnesium-lithium alloys are among the lowest density metallic materials. Addition of lithium, with a relative density of 0·53, in magnesium reduces the density of the alloy significantly. Furthermore, addition of nearly 11 wt.% lithium converts hexagonal close packed structure of pure magnesium to a body centered cubic lattice, markedly improving formability of the alloy. The development of these alloys, however, had been hampered due to the high reactivity of lithium and magnesium in the molten state and also, due to poor creep resistance and instability of mechanical properties at room temperature. In an attempt to indigenize these ultra light alloys for possible applications in Indian satellite programme, detailed research work was initiated in DMRL. The difficulties associated with producing sound cast ingots have been overcome by controlling melting and casting parameters of these alloys. Extensive work has been done on structure-property correlation of alloys with varying lithium content and minor alloying additions. Based on these work, advanced magnesium-lithium alloys have been developed with improved tensile properties, room temperature stability and creep resistance. Wrought products (plates/sheets) of magnesium-lithium alloy have been supplied to ISAC, Bangalore and are being used in their INSAT-2 programme. This paper describes the systematic studies carried out in the laboratory to indigenize these ultra light alloys.     

攀钢转炉炼钢用碳化硅提温的试验研究

低品位碳化硅是转炉炼钢的有效提高温剂。工业性试验结果表明，碳化硅加入８．０ｋｇ／ｔ钢水提温４０．３－７０．３℃（平均４８．４℃）；渣中ＴＦｅ降低１．３％；加提温剂有利于转炉内造渣脱硫和碱少炉渣对耐火砖的侵蚀。文中还给出了攀钢转炉半钢冶炼铸用钢不水时加与不加碳化硅的ｔλ，［Ｃ］λ区域。     

3961连续重整催化剂性能考察

新一代高活性，高水热稳定性3961（PS－Ⅳ）型连续重整催化剂于1996年在上海石化芳烃厂400kt/a连续重整装置上首次进行工业应用试验。开工5a，催化剂跟踪分析结果表明，该剂保持了良好的物化性质和反应性能，表现为良好的比表面积稳定性和持氯能力，经过200个以上再生周期的催化剂未发现有明显的相变和金属分散度的变化。