自动喷水灭火装置中易熔合金型感温器件的研究

剖析了自动喷水灭火装置中感温元件的性能.实验研究了几种易熔合金的熔点温度,提出了用一种新的易熔合金型感温元件替代玻璃泡型感温元件,阐述了这种易熔合金型感温元件的结构设计和性能试验.     

硬盘磁头生产中的ESD防护技术

基于ESD在硬盘磁头生产过程中的产生机理,文章分析了ESD在磁头生产中的几种典型损坏模型,阐述了硬盘磁头生产中如何进行ESD防护,提出了对工作人员、生产机器、生产方法、物料和生产环境等有效的ESD防护技术,从而有效减少在硬盘磁头生产中ESD对磁头的损坏。     

红外导引头对巡航导弹的探测距离研究

巡航导弹体积小和低空飞行的特点,使得其具有目标红外辐射强度小、地面背景干扰大以及低空大气对其红外辐射的透过率低的优点。为了准确计算红外导引头对巡航导弹的探测距离,文章对巡航导弹的红外辐射特性以及地面背景的红外辐射特性进行了分析,进一步建立了红外导引头对巡航导弹探测距离的计算模型。提出了利用图解法对作用距离方程进行解算的方法,提高了作用距离模型的计算准确度。利用所建模型计算了某中距离红外导引头对一种巡航导弹的探测距离。计算结果表明,导引头对该巡航导弹的探测距离远小于对常规空中目标的探测距离,尤其在8μm～12μm波段,迎头方向无法探测。     

Adams仿真在键合头柔性设计中的应用

利用adams软件对所设计的键合头Z向运动进行了动态仿真,得到设计中弹簧预紧力的大小,是键合头二零件间发生震荡与否的关键因素,并且存在一临界值,大于其值不会发生震荡,小于则会发生。弹簧刚度的大小只影响振动时的振幅,对于没有振动出现的情况无影响。     

Fuzzy logic based clustering in wireless sensor networks: a survey

Wireless sensor networks (WSNs) have limited resources, thus extending the lifetime has always been an issue of great interest. Recent developments in WSNs have led to various new fuzzy systems, specifically designed for WSNs where energy awareness is an essential consideration. In several applications, the clustered WSN are known to perform better than flat WSN, if the energy consumption in clustering operation itself could be minimised. Routing in clustered WSN is very efficient, especially when the challenge of finding the optimum number of intermediate cluster heads can be resolved. Fortunately, several fuzzy logic based solutions have been proposed for these jobs. Both single- and two-level fuzzy logic approaches are being used for cluster head election in which several distinguished features of WSN have been considered in making a decision. This article surveys the recent fuzzy applications for cluster head selection in WSNs and presents a comparative study for the various approaches pursued.     

Ф80镗滚压头的设计

针对80缸体的内孔进行分析和研究 ,设计出镗削、滚压同时进行的80镗滚压头。     

扇形蜗轮的铣削加工

介绍用单刀间断展成法加工扇形蜗轮,解决了在滚齿机上很难加工螺旋角β＝０°的扇形蜗轮的问题。     

标准音频信号磁带快速复制磁头的研制

分析了标准音频信号磁带快速复制磁头的磁芯结构特点,并根据磁头的漏磁通分布,给出了磁头的等效磁路。在对磁头磁阻及相关参数如磁头电感量Ｌ,磁头记录电流Ｉｒ等的计算中,考虑了磁芯材料磁导率μ↑￣的复数特性,得到了与实验一致的结果。     

施工宽缝对整体式闸首底板的受力影响研究

鉴于整体式闸首底板在顺水流方向易出现裂缝,严重危害船闸的使用安全。本文提出的设置施工宽缝的施工方案可以有效改善整体式闸首底板开裂问题。首先运用ANSYS软件建立模型,对闸首结构进行有限元分析,进一步探索出施工宽缝对整体式闸首底板的应力与变形的影响,将应力计算结果转换成内力,最终研究出满足工程要求的最优合缝时间和设缝位置,从而为整体式船闸的施工提供参考。     

Sunflower Head Residue Pectin Extraction as Affected by Physical Conditions

Effects of extraction pH, temperature, and time on yield and quality of pectin from sunflower heads (Interstate cultivar) were investigated. The low-methoxyl pectin was extracted, using 0.75% sodium hexametaphosphate at pH 3, 4, and 5 and at 75, 85, and 95°for 20, 40, and 60 min, respectively. Yield, molecular mass, and firmness of jellies of the pectins were determined. Three-way statistical analysis on yield, molecular mass and gel firmness showed strong interactions among pH, temperature and time. Highest yields were obtained at pH 5, 95°for 20 min and pH 4, 85°for 40 min. Pectin extracted for 40 min at pH 3 and 4 and at 85°and 75°C, respectively, had the highest molecular mass. Gel firmness of sunflower pectin prepared at pH 5.4 was higher than that of a commercial citrus pectin.