Strategies for increasing evaporative cooling during simulated desert patrol mission

The study evaluated the efficiency of two heat dissipation strategies under simulated desert patrol missions. Ten men participated in four trials, during which they walked on a treadmill (45°C, 20% relative humidity), carrying a load of 35 kg; two 50-min walks were separated by a 20-min rest. Cooling strategies, provided by an ambient air-ventilated vest (active cooling condition, AC), or water spraying of the skin during the rest (passive cooling condition, PC), in addition to reduced clothing and open zippers, were compared to conditions with full protective (FP) clothing and naked condition (NC). Skin temperature was higher during NC (37.9 ± 0.4°C; p < 0.001), and rectal temperature and heart rate were higher during FP (38.6 ± 0.4°C, p < 0.001 and 145 ± 12, p < 0.001, respectively), compared to other conditions. Four subjects terminated the trial prematurely due to signs of heat exhaustion in FP. Both cooling strategies substantially improved evaporative cooling.     

Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

认知无线电网络信道选择机制

认知无线电网络通过动态频谱接入来提高无线频谱资源利用率,而节点目标信道选择的优劣直接决定了频谱接入性能的好坏. 本文首先综合考虑信道增益和空闲时间两种因素,设计以实现最大化系统容量的目标信道选择机制,然后引入信道热度概念,提出一种多属性决策信道选择机制. 仿真结果表明,多属性决策信道选择机制在系统吞吐量和频谱利用率性能上都有明显的提高.     

Fast computation of minimal elementary decompositions of metabolic flux vectors

The concept of elementary flux vector is valuable in a number of applications of metabolic engineering. For instance, in metabolic flux analysis, each admissible flux vector can be expressed as a non-negative linear combination of a small number of elementary flux vectors. However a critical issue concerns the total number of elementary flux vectors which may be huge because it combinatorially increases with the size of the metabolic network. In this paper we present a fast algorithm that randomly computes a decomposition of admissible flux vectors in a minimal number of elementary flux vectors without explicitly enumerating all of them.     

A Newton-like finite element scheme for compressible gas flows

Semi-implicit and Newton-like finite element methods are developed for the stationary compressible Euler equations. The Galerkin discretization of the inviscid fluxes is potentially oscillatory and unstable. To suppress numerical oscillations, the spatial discretization is performed by a high-resolution finite element scheme based on algebraic flux correction. A multidimensional limiter of TVD type is employed. An important goal is the efficient computation of stationary solutions in a wide range of Mach numbers, which is a challenging task due to oscillatory correction factors associated with TVD-type flux limiters. A semi-implicit scheme is derived by a time-lagged linearization of the nonlinear residual, and a Newton-like method is obtained in the limit of infinite CFL numbers. Special emphasis is laid on the numerical treatment of weakly imposed characteristic boundary conditions. Numerical evidence for unconditional stability is presented. It is shown that the proposed approach offers higher accuracy and better convergence behavior than algorithms in which the boundary conditions are implemented in a strong sense.     

Laminar convection in the annulus of a double-pipe with triangular fins

A steady and laminar convective flow has been numerically simulated in the fully-developed annular region of a finned double-pipe subjected to the constant heat flux boundary condition imposed at the inner-pipe wall. Finite element method has been employed in this study. Friction factor and Nusselt number have been studied as flow characteristics against variations in the ratio of radii of the inner and the outer pipes, the fin height, the fin half angle and the number of fins. The results show significant enhancement in the heat transfer rate in both the cases when sufficient pumping power is available and when it is not. The minimum and maximum increase in the product of friction factor and Reynolds number relative to the finless geometry is more than one time and more than 40 times respectively while gain in the relative value of Nusselt number lies in the range 1–177. This provides an evidence of more than four times enhancement in the heat transfer coefficient relative to that in the pressure loss as a result of extended fin surfaces.     

Exploring indicators for quantifying surface urban heat islands of European cities with MODIS land surface temperatures

The term urban heat island describes the phenomenon of altered temperatures in urban areas compared to their rural hinterlands. A surface urban heat island encompasses the patterns of land surface temperatures in urban areas. The classical indicator to describe a surface urban heat island is the difference between urban and rural surface temperatures. However, several other indicators for this purpose have been suggested in the literature. In this study, we compared the eleven different indicators for quantifying surface urban heat islands that were most frequently used in recent publications on remote sensing-based urban heat island assessments. The dataset used here consists of 263 European cities with monthly mean temperatures from MODIS data products for July 2002, January 2003 and July 2003. We found that (i) the indicators individually reveal diurnal and seasonal patterns but show rather low correlations over time, and (ii) for single points in time, the different indicators show only weak correlations, although they are supposed to quantify the same phenomenon. Differentiating cities according to thermal climate zones increased the relationships between the indicators. Thus, we can identify temporal aspects and indicator selection as important factors determining the estimation of urban heat islands. We conclude that research should take into account the differences and instabilities of the indicators chosen for quantifying surface urban heat islands and should use several indicators in parallel for describing the surface urban heat island of a city.     

Strong stability of the mono-tubular heat exchanger equation with output feedback

We investigate asymptotic behavior of the C₀-semigroup T(t) associated with the mono-tubular heat exchanger equation with output feedback by a perturbation method. It is shown that T(t) is bounded if a constraint is satisfied by the parameters and the spatial distribution function. Further, applying the Arendt-Batty-Lyubich-Vu theorem, a criterion is established to judge strong stability of T(t).     

炉温微机控制系统优化设计

提出了炉温微机控制系统的优化设计方法,描述了硬件系统总体设计及工作原理,系统软件设计及主要流程.由于采用了一系列的优化设计和优化措施,该电阻炉微机控温系统取得了很好的效果.