A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition

Waste combustion is an interesting alternative for waste management and energy recovery. Knowledge of the waste higher heating value (HHV) is important for judging it’s worth as fuel. This work introduces a new equation, based on thermochemical concepts, to calculate HHV from elemental composition. This equation is expressed in terms of mass percentages on a dry basis of carbon (%C), hydrogen (%H), oxygen (%O), nitrogen (%N), and sulfur (%S); the HHV is computed in MJ/kg. The equation is as follows: HHV=(1−(%H₂O/100))(−0.3708(%C)−1.1124(%H)+0.1391(%O)−0.3178(%N)−0.1391(%S)). The thermochemical concept on which this expression is based involves a wide applicability. This equation neglects the inorganic carbon, hence it is not very adequate when there is a significant concentration of it. The predictions from this approach were contrasted against those proceeding from equations currently used in combustion technology, and also against bomb calorimeter data. The new equation is clearly competitive with respect to other formulations, and it can be very helpful for presenting a waste HHV value based on different derivation suppositions.     

Experimental evaluation of the strength distribution of E-glass fibres at high strain rates

A bimodal Weibull distribution function was applied to analyse the strength distribution of glass fibre bundles under tensile impact. The simulation was performed using a one-dimensional damage constitutive model. The results show that there were two concurrent flaw populations in the fracture process. The regression analysis using the bimodal Weibull distribution function was in good agreement with experiment.     

泡沫铝的动态压缩性能和吸能性研究

通过测量泡沫铝在动态和准静态压缩条件下的应力 -应变曲线 ,研究了泡沫铝的准静态和动态压缩行为以及不同应变条件下的吸能性 ,并对其应变率效应进行了分析。结果表明 ,在高应变速率和准静态压缩下 ,泡沫铝的σ -ε曲线均表现出弹性变形段、平缓段和密实段三阶段特征 ;泡沫铝的压缩性能具有明显的应变速率敏感性 ,随应变速率的提高 ,流动应力上升 ,吸能性升高     

红外加热节能技术的现状与发展前景

本文综述了国内外节能的现状与发展趋势,论述了远红外电加热领域的发展前景,强调了加强基础理论研究的重要性,介绍了我国红外加热应用的领域和国外新开发的红外产品。     

硫化钠在黑白钨加温精选中的应用研究

介绍了柿竹园黑白钨混合粗精矿加温精选中 ,添加硫化钠与水玻璃混合剂比单一添加水玻璃能更有效地使白钨矿与萤石等含钙矿物及脉石矿物分离。论述了硫化钠在加温精选中的作用效果并探讨了其作用机理     

材质对蜂窝纸板缓冲性能的影响

对两种不同材质的蜂窝纸板静态应力应变性能和动态缓冲结果进行了比较分析。讨论了蜂窝纸板力学性能对应变速度的敏感性及两种纸板的缓冲性能差异。缓冲试验结果表明。在不同的冲击应变率下蜂窝纸板的材质影响蜂窝纸板缓冲性能。     

RF antenna analysis with the ICANT code

The ICANT code computes self-consistently the surface current distribution on a 3D antenna model radiating in a plasma or vacuum and has been used to analyze the coupling properties of various antenna models. In this work it is used to assess near-fields generated by different versions of the TCABR (Tokamak Chauffage Alfvén wave heating experiment in Brazil) antenna as well as coupling properties of the TEXTOR tokamak in Forshungszentrum Jülich. Two different strap models planned for the TCABR antenna are shown to be practically equivalent in terms of maximum electric field. Textor coupling calculations are close to experimental values.     

砂岩储集层微波加热产生微裂缝的机理及意义

微波加热无需介质传热,具有升温速度快、热惯性小、选择性加热、穿透力强、过程易于控制等优点,已被试验性地应用于石油开采中。但有关微波加热对储集层岩石微观结构影响的研究还很缺乏,限制了该项技术在油气开采领域的广泛应用。通过实验手段研究了微波加热前后砂岩岩样微观结构变化、微裂缝产生机理及特征。结果表明,砂岩在微波加热过程中容易产生微裂缝,且不同岩石的微波加热致裂机理不尽相同,主要包括:矿物失水收缩、颗粒粒间开裂和颗粒内部开裂,低渗透致密砂岩刚性颗粒的粒内开裂作用显著。微波加热产生的微裂缝具非定向特征,即使在应力的作用下有一部分裂缝会发生闭合,但仍有大量微裂缝可以起到增加渗透率的作用。井下微波加热的致裂作用有助于改善近井区域渗流能力,提高低渗透油气藏的开采效率。图4参15     

Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.