高功率二极管泵浦固体激光技术和应用前景的分析

文章对高功率二极管泵浦固体激光器的若干关键技术，包括激光二极管和增益介质，泵浦，耦合和冷却技术，以及光学谐振腔等作了详细的分析。     

Sound-velocity measurements for HFC-134a and HFC-152a with a spherical resonator

A spherical acoustic resonator was developed for measuring sound velocities in the gaseous phase and ideal-gas specific heats for new refrigerants. The radius of the spherical resonator, being about 5 cm, was determined by measuring sound velocities in gaseous argon at temperatures from 273 to 348 K and pressures up to 240 kPa. The measurements of 23 sound velocities in gaseous HFC-134a (1,1,1,2-tetrafluoroethane) at temperatures of 273 and 298 K and pressures from 10 to 250 kPa agree well with the measurements of Goodwin and Moldover. In addition, 92 sound velocities in gaseous HFC-152a (1,1-difluoroethane) with an accuracy of ±0.01% were measured at temperatures from 273 to 348 K and pressures up to 250 kPa. The ideal-gas specific heats as well as the second acoustic virial coefficients have been obtained for both these important alternative refrigerants. The second virial coefficients for HFC-152a derived from the present sound velocity measurements agree extremely well with the reported second virial coefficient values obtained with a Burnett apparatus.Paper dedicated to Professor Joseph Kestin.     

Helmholtz共振腔气动噪声数值仿真

为探究出一套完整、准确的气动噪声仿真方法,用FLUENT和Actran仿真Helmholtz共振腔旁接管道系统模型.针对流场仿真,采用六面体网格建模,分析选择合适的网格密度,明确网格及边界条件的影响,以获得准确的声源信息;运用Lighthill声类比方法对声场进行仿真,采用数值计算、传声损失仿真和气动噪声仿真计算等3种方法提取管道内部场点声压级频谱曲线,分析曲线峰值频率特征,包括共振频率分析和声模态分析等.采用CFD软件与声学仿真软件相结合的方法,可以有效进行流场和声场的仿真.     

Speed-of-sound measurements in liquid and gaseous air

The speed of sound in air has been measured along isotherms for a standard air mixture (0.7811 N₂+0.2097 O₂+0.0092 Ar) in the gas and liquid phases at pressures to 14 MPa. A cylindrical resonator was used in the vapor and supercritical gas phases, and a time-of-flight system was used for measurements of the liquid phase. Data were obtained for the liquid phase at 90, 100, 110, 120, and 130 K. Data were taken at 110, 120, 130, 135, 140, 150, 200, and 300 K in the vapor and supercritical gas phases. These experimental results were compared to a predictive computer model, namely, AIRPROPS.     

短开路耦合谐振器加载的宽带带通滤波电路

提出了一种基于短开路耦合器加载的宽带带通滤波电路. 该滤波电路通过在输入和输出端口之间,并连加载短路耦合微带谐振器和开路耦合微带谐振器实现5个传输极点和3个传输零点的带通选择特性. 对所提出的短开路耦合谐振器进行了奇偶模理论分析,揭示了其传输零极点形成的物理机理. 最后,对所提出的滤波电路进行了加工测试. 测试结果表明,所提出的宽带滤波电路能够在2.0～4.2 GHz频率范围内实现 3 dB 带通传输,工作相对带宽为73%,仿真和实测结果吻合较好.     

针对通过噪声的空滤器声学特性研究与改进

通过实验方法分析研究了一种中型乘用车通过噪声的特性,比较该车进、排气两侧通过噪声的声级和频谱特性,确定了进气噪声对车辆进气侧通过噪声的重要影响.为了解决该车进气噪声的问题从而达到整车降噪的目的,应用实验与边界元法计算两种手段,对该车空滤器的频率响应特性进行了研究.研究发现空滤器声系统的第一阶声固有频率与进气噪声基频相耦合是造成该车辆进气侧通过噪声高于排气侧的重要原因.基于这一研究结果,在计算和实验的基础上利用Helmholtz共振腔对空滤器的声学特性进行了改进,改进后的空滤器对降低车辆进气侧通过噪声有很好的作用.     

Dual segment rectangular dielectric resonator antenna with metamaterial for improvement of bandwidth and gain

The simulation and experimental studies of an aperture‐coupled wideband dual segment rectangular dielectric resonator antenna with metamaterial for C‐band applications are presented in this paper. The antenna consists of Alumina (Al₂O₃) ceramic as upper segment and Teflon as lower segment. The combination of circular‐shaped coplanar split‐ring resonator and conducting strip has been used as metamaterial superstrate. With the use of metamaterial superstrate, the bandwidth of the antenna is increased by 48% through simulation and 22% experimentally. The broadside radiation pattern of the antenna is converted into directive radiation pattern with reduced beamwidth when metamaterial superstrate is used. The peak gain of the antenna is also enhanced by 33% through simulation and 31% experimentally with the use of metamaterial superstrate. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:646–655, 2014.     

基于MEMS声传感器的圆柱壳体振动陀螺振型检测技术

振动陀螺谐振子振型一般采用激光进行非接触式测量,这种方法存在设备成本高、操作复杂、效率低等问题,因此,提出了一种基于MEMS声传感器的圆柱壳体振动陀螺谐振子振型测试方法。该方法利用体积小,指向性高的MEMS声传感器对谐振子振动声场进行高分辨率测量,获得精确的谐振子振动分布情况,建立了谐振子声波测试实验系统,进行了测试实验,并与激光测振仪的测量结果进行比对。实验结果表明,该测试系统具有较高的振型测量精度。这种测试方法成本低,操作简便,测量精度高,可以实现谐振子振型的高精度快速测量,为后续的谐振子修形及陀螺控制提供重要基础。     

I形MEMS谐振器的电阻差分检测方法

为克服Ｉ2形MEMS谐振器输入端（热执行）与输出端（压阻敏感）直接耦合所造成的输出信号品质较差的缺点,设计并制作了一种电阻差分检测电路。该电路通过外接电阻的方法,产生与输出信号中耦合成分幅值相同、相位相反的差分信号。将差分信号与谐振器输出信号相组合,从而实现解耦的目的。实验结果表明,电阻差分检测可有效消除了输出信号中的耦合成分,使频谱响应曲线得到更直观的体现。与其他消除耦合信号的技术方案相比（混频检测电路、惰性谐振器等）,电阻差分检测法电路设计简单,无需改动器件的加工工艺,有利于满足未来器件小型化要求。     

Design of Multi-band Small Antenna Based on Single Split-Ring Resonator

To use the single split-ring resonator(SRR)as a basic unit cell for small antenna with multi-band frequency response is proposed.The structure of antenna is consisted of a single spilt-ring resonator and a coupled microstrip line.The designed antenna is numerically optimized with CST Microwave Studio.The radiation properties of the antenna show that there are three frequency bands among which two bands are 1.3 GHz and 2.1 GHz ultra-wideband(UWB),respectively,where S11 is less than-10 dB.The gain at every fr...