集群式高性能计算系统研究

研究了集群的系统结构和主要优势,以及集群式高性能计算系统的诞生;分析了集群式高性能计算系统的架构和构建方式,集群构建包括网络部署、存储系统、计算节点、管理节点、登录节点等部分。在此基础上构建了基于Linux的集群式高性能计算系统。     

山西省近50年风速变化及突变特征分析

利用线性拟合、M-K方法对山西省22个气象观测站1960—2010年的逐日风速资料进行了倾向、突变、逐年代变化等特征分析。研究表明,近50年来山西省平均风速存在明显的下降趋势,平均风速由20世纪60年代的2.16 m/s下降到21世纪初的1.86 m/s;不同时间段呈现不同的变化特征,1979—1989年风速出现显著下降,年均递减率达到0.046 m/s,变率远超出其他时段;对近50年山西省平均风速进行M-K检验后发现,在1982年出现明显的突变点。山西省四季平均风速均呈下降趋势,四季风速下降速率最快的为春季,冬季次之,夏季风速下降速率最慢。同样,四季风速均发生突变,突变时间点分布在1980—1985年间。除8月外,山西省各个月份风速也呈下降趋势,且均出现突变现象。     

High‐precision formation control of nonlinear multi‐agent systems with switching topologies: A learning approach

Arbitrary high precision is considered one of the most desirable control objectives in the relative formation for many networked industrial applications, such as flying spacecrafts and mobile robots. The main purpose of this paper is to present design guidelines of applying the iterative schemes to develop distributed formation algorithms in order to achieve this control objective. If certain conditions are met, then the control input signals can be learned by the developed algorithms to accomplish the desired formations with arbitrary high precision. The systems under consideration are a class of multi‐agent systems under directed networks with switching topologies. The agents have discrete‐time affine nonlinear dynamics, but their state functions do not need to be identical. It is shown that the learning processes resulting from the relative output formation of multi‐agent systems can converge exponentially fast with the increase of the iteration number. In particular, this work induces a distributed algorithm that can simultaneously achieve the desired relative output formation between agents and regulate the movement of multi‐agent formations as desired along the time axis. The illustrative numerical simulations are finally performed to demonstrate the effectiveness and performance of the proposed distributed formation algorithms. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐resolution technology for FPD manufacturing

Using shorter wavelength for exposure light is one way to achieve high resolution while keeping sufficient depth of focus. We show exposure results for high resolution to confirm the effect of deep UV exposure light. With deep UV light, 1.2‐µm line and space pattern and 1.8‐µm contact hole pattern are resolved while keeping sufficient depth of focus.     

Reliability and mechanical durability tests of flexible OLED with ALD coating

To improve the reliability and mechanical durability of a flexible organic light‐emitting diode display, the entire flexible display is coated with an aluminum oxide film by atomic layer deposition (ALD). Because the step coverage of ALD is excellent, the AlO_x film was deposited not only on the front and back surfaces but also on the side surfaces of the display. A high‐temperature and high‐humidity preservation test, repetitive bending tests, and a pencil hardness test were conducted on the flexible display with ALD‐AlO_x coating. The display survived 500 h of a 65°C, 95% preservation test, endured a 100,000‐time repetitive bending test with a curvature radius of 4 mm, and was found to have a pencil hardness of 4H.     

Design of a printed log‐periodic dipole array antenna with high gain for millimeter‐wave applications

In this article, a V‐band printed log‐periodic dipole array (PLPDA) antenna with high gain is proposed. The antenna prototype is designed, simulated, fabricated, and tested. Simulation results show that this antenna can operate from 42 to 82 GHz with a fractional impedance bandwidth of 64.5% covering the whole V‐band (50–75 GHz). The antenna has a measured impedance matching bandwidth that starts from 42 to beyond 65 GHz with good agreement between the experimental and simulated results. At 50 and 65 GHz, the antenna has a measured gain of 10.45 and 10.28 dBi, respectively, with a gain variation of 2.6 dBi across the measured frequency range. The antenna prototype exhibits also stable radiation patterns over the operating band. It achieves side‐lobe suppression better than 17.26 dB in the H‐plane and better than 8.95 dB in the E‐plane, respectively. In addition, the cross‐polarization component is 18.5 dB lower than the copolarization with front‐to‐back ratio lower than 24.1 dB in both E‐ and H‐planes across the desired frequency range. Based on a comparison of performance among the reported work in the literature, we can say that the proposed PLPDA antenna is a proper candidate to be used in many applications at V‐band frequency. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:185–193, 2015.     

Optimal Terminal Iterative Learning Control for the Automatic Train Stop System

The train stop control is a typical set‐point control task, where only the final state (i.e., the terminal train stop position) is of concern and specified. For such a control problem, an optimal terminal iterative learning control (TILC) approach is presented in this paper, where the stopping position and initial braking speed are chosen as the terminal system output and the control input, respectively. The controller design only depends on the measured input/output (I/O) data without requiring any modeling information of the train operation system, and the learning gain is updated by the system I/O data iteratively to accommodate the system uncertainties. The monotonic convergence of the terminal tracking error is guaranteed by rigorous mathematical analysis. Extensive simulation results are provided to show the applicability and effectiveness of the proposed approach.     

High‐order sliding mode control design based on adaptive terminal sliding mode

High‐order sliding mode control techniques are proposed for uncertain nonlinear SISO systems with bounded uncertainties based on two different terminal sliding mode approaches. The tracking error of the output converges to zero in finite time by designing a terminal sliding mode controller. In addition, the adaptive control method is employed to identify bounded uncertainties for eliminating the requirement of boundaries needed in the conventional design. The controllers are derived using Lyapunov theory, so the stability of the closed‐loop system is guaranteed. In the first technique, the developed procedure removes the reaching phase of sliding mode and realizes global robustness. The proposed algorithms ensure establishment of high‐order sliding mode. An illustrative example of a car control demonstrates effectiveness of the presented designs. Copyright © 2011 John Wiley & Sons, Ltd.     

Genetic algorithm‐based neural‐network modeling approach applied to AlGaN/GaN devices

An accurate equivalent circuit large‐signal model (ECLSM) for AlGaN‐GaN high electron mobility transistor (HEMT) is presented. The model is derived from a distributed small‐signal model that efficiently describes the physics of the device. A genetic neural‐network‐based model for the gate and drain currents and charges is presented along with its parameters extraction procedure. This model is embedded in the ECLSM, which is then implemented in CAD software and validated by pulsed and continuous large‐signal measurements of on‐wafer 8 × 125‐μm GaN on SiC substrate HEMT. Pulsed IV simulations show that the model can efficiently describe the bias dependency of trapping and self‐heating effects. Single‐ and two‐tone simulation results show that the model can accurately predict the output power and its harmonics and the associated intermodulation distortion (IMD) under different input‐power and bias conditions. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

软启动器在煤矿大采高工作面中的应用研究

介绍了神华乌海能源有限责任公司大采高工作面的供电方案及设备配套,研究了软启动器在刮板输送机中应用的可行性,重点分析了使用软启动器之后采区负载启动时对移动变电站的电气冲击情况。使用Matlab/Simulink软件建立采区供电系统模型,对软启动器的启动性能进行仿真分析,在轻载时使用限流启动方式,在重载时使用变频启动方式,结果表明软启动器能有效降低设备启动时的电气冲击。