A new curvature technique calculation for surface tension contribution in PLIC-VOF method

The volume of fluid (VOF) methods have been used for numerous numerical simulations. Among these techniques used to define the moving interface, the piecewise linear interface reconstruction (PLIC-VOF) is one of the most accurate. A study of the superficial tension impact on two-phase flow with free surface is presented. A new method based on direct staggered grid is developped to include surface tension in PLIC-VOF. The new numerical curvature calculation method doesn't need smoothed colour function and leads to less “spurious current”. This technique is applied to the calculus of surface tension force in the case of the rise of air bubble in viscous liquid and the fall of liquid drop in the same liquid on free surface. Droplets, thin layer and capillarity waves are observed after the free surface rupture for different Bond number. The influence of surface tension calculus is then obvioused and when the drop hit the free surface, wavelets propagate toward the virtual boundaries imposed.     

PERIODIC DYADIC GREEN''S FUNCTION FOR FIELD ANALYSIS IN EMC CHAMBER

Herein a novel Dyadic Green's Function (DGF) is presented to calculate the field in ElectroMagnetic Compatibility (EMC) chamber. Due to the difficulty of simulating the whole chamber environment, the analysis combines the DGF formulation and the FEM method, with the latter deals with the reflection from absorbers. With DGF formulation for infinite periodic array structures, this paper investigates electromagnetic field in chamber with truncated arrays. The reflection from the absorber serves as the virtual source contributing to the total field. Hence the whole chamber field calculation can be separated from the work of absorber model set-up. Practically the field homogeneity test and Normal Site Attenuation (NSA) test are carried out to evaluate the chamber performance. Based on the method in this paper, the simulation results agree well with the test, and predict successfully the victim frequency points of the chamber.     

硅橡胶机械强度改进方法的研究

使用以硅橡胶为绝缘材料的新一代高压复合绝缘子是解决输变电线路污闪问题行之有效的方法，针对复合绝缘子用硅橡胶生产和运行中存在的主要问题，从添加补强材料白炭黑（最佳用量在35份左右）和改变硫化时间（最佳硫化时间8min）两方面入手进行试验，研究如何改善硅橡胶的机械强度尤其是抗撕裂强度。     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

层次分析法在工程评标中的应用

根据评标工作多层次多准则的特点,将层次分析方法引入工程评标中,并结合工程实例介绍了方法的具体运用。实践表明,层次分析法思路清晰,方法简便,能减少主观因素的影响,评价结果准确,是一种实用的工程评标方法。     

Magnetic Resonance Visualisation of Flow and Pore Structure in Packed Beds with Low Aspect Ratio

Different NMR techniques were combined to obtain the structure and velocity information for a systematic investigation of fixed beds with low aspect ratio (tube diameter to particle diamter, d_t/d_p) in the range 1.4 to 32. The structure of the void space was determined for a variety of packed beds of glass beads or regular and irregular porous pellets by magnetic resonance imaging (MRI). Based on the images the radial distribution of the voids within the bed was obtained. Ordering effects were found even for non‐spherical and polydisperse particles, and a maximum of the fluid density near the tube wall was confirmed for all pellet geometries and sizes. By combining MRI with velocity encoding, velocity profiles and distributions of flow velocity components of a single fluid phase through packed beds have been acquired. The radial velocity distribution follows an oscillatory pattern which largely reflects the ordering of the particles, which can be accessed from the density distribution of the interparticle fluid. Maximum velocities of up to four times the average value were found to occur near the tube wall. This wall effect was observed for all but the smallest particles, where the aspect ratio was d_t/d_p = 32. Moreover, a visualisation of flow pattern in the presence of packed particles was achieved by using a tagging technique, and the stationary flow field could be identified for an experimental time of several hours.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

Flow stress of high density polyethylene and nylon 66 at high rates of strain

Measurement of the flow stress of high density polyethylene (HDPE) and nylon 66 at strain rates of 10³ s^?1 using a split Hopkinson pressure bar technique is discussed. The flow stress at a strain of 10% has been determined for both polymers at 20°C. The intrinsic errors involved in this technique are briefly reviewed. The results indicate that the flow stress of HDPE and nylon 66 were 50MPa and 150MPa, respectively, at strain rates of about 10³s^?1.