焊接构造对T型接头超低周疲劳性能的影响

为了研究焊接细节对钢结构超低周疲劳性能的影响,以T型接头为对象,在通用有限元程序Abaqus平台上,开发基于Arlequin算法的结构多尺度计算程序. 利用多尺度算法,开展焊接接头的局部弹塑性有限元分析. 比较焊趾半径、厚钢板未熔透长度及焊趾表面凹凸对局部塑性应变履历的影响,利用Coffin-Manson模型对T型接头的超低周疲劳特性进行定性讨论. 数值计算结果表明,焊趾位置是焊接接头的超低周疲劳易损位置,厚钢板的未熔透长度对焊接部位局部塑性应变的影响不大;焊趾半径对焊趾局部塑性应变有较大的影响,增大焊趾半径可以有效提升钢结构在循环荷载下的超低周疲劳性能;焊趾表面的平整性是影响焊趾局部塑性应变履历的重要因素,尖锐的凹坑会明显降低焊接接头的超低周疲劳性能,磨平的焊趾表面可以减少局部塑性应变,提高接头的超低周疲劳强度.     

桥梁美学2020度年研究进展

本文通过梳理过去一年国内外桥梁美学的发展状况,从桥梁美学思想与理论,桥梁美学设计方法与理论,桥梁景观设计与改造,桥梁规划设计,桥梁历史文化设计与研究,新技术在桥梁美学设计中的应用,桥梁美学设计应用实践等方面阐述了桥梁美学的发展成就;对将来的研究热点和发展方向进行了简要预测;提出了建议和观点,希望对桥梁美学理论和设计实践有所裨益。     

对涂料发展史及其系统的探讨

提出了涂料发展的三个时期与四个阶段的理论。同时指出,伴随涂料不断发展过程,发生了四次概念更新。在此基础上,提出了广义涂料概念和涂料大系统的新观点,以及建立涂涂层系统料新的理论体系的设想.     

挤出工程和挤出理论发展史研究

在回顾挤出工程和挤出理论发展历史的基础上,作出了4点结论与建议。明确地提出要坚决打破我国存在的树脂及材料工业、制品加工工业和塑机制造工业等行业界限,根据当前知识经济时代的特点,坚持走依靠自我力量技术创新、产学研相结合的道路。     

料浆法磷铵工艺的历史和近期技术进展

简单回顾“中和料浆浓缩法磷铵工艺”在我国的发展历史和现状 ,着重介绍该工艺与采用传统“磷酸浓缩工艺”的大型进口磷铵装置实现“联产”,促进、优化后者的生产和经营的科技创意和实践 ,展望该工艺最新技术进展的推广应用前景     

6m大容积焦炉烘炉实践与体会

介绍了 6 m大容积焦炉由冷态到转入正常加热温度的烘炉操作过程中 ,按照一定的升温曲线 ,通过对焦炉热工和炉体膨胀的科学管理 ,确保新建焦炉顺利由冷态过渡到生产状态。     

Distinctive combustion stages of single heavy oil droplet under microgravity

This report presents an investigation on the combustion of single droplets comprised of heavy oil and oil mixtures blending diesel light oil (LO) and a heavy oil residue (HOR). The tests were conducted in a microgravity facility that offered 10 s of free-fall time. Fine wire thermocouples supported the droplets, resulting in a measurement of droplet temperature history. Additional data were the droplet and flame size history. The results identified four distinctive burning stages between ignition and extinction for heavy oil (C class) and HOR-LO blends. They are, in succession, the start-up, inner evaporation, thermal decomposition (pyrolysis) and polymerization stages. The start-up stage denoted an initial transient period, where the LO components burned from the droplet surface and the droplet temperature increased rapidly. The latter three stages featured pronounced droplet swellings and contractions caused by fuel evaporation and decomposition inside the droplet. An evaporation temperature demarcated the start-up stage from the inner evaporation stage, and this temperature corresponded to a plateau in the temperature history of the droplet. Two additional temperatures, termed the decomposition and polymerization temperatures, indicated the ends of the evaporation and decomposition stages. These temperatures were similarly identified by plateaus or inflection points in the time-temperature diagram. The evaporation temperature gradually decreased with increasing the initial LO mass fraction in the droplet, whereas the other two temperatures were almost independent of the oil composition. All three temperatures increased with decreasing initial droplet diameter, but the dependence was very slight. Based on the results, the combustion of heavy oil droplets appears to be dominated by a distillation-like vaporization mechanism, because of the rapid mass transport within the droplets caused by the disruptive burning.     

广西古代陶器组成的研究

桂林甑皮岩遗址发现了距今９２４０－１０３７０年的陶片，证实了广西地区从新石器以来就成为我国古代陶器的发源地之一。本工作研究了广西出土的４４块陶片，测定了陶胎的化学和矿物组成。由此表面广西古陶的ＳｉＯ２含量随时代变迁而逐渐增加，而Ｆｅ２Ｏ３含量在明显下降，Ａｌ２Ｏ３的含量也有降低的趋势。     

消能支撑框架结构的研究与应用

对几种型式的消能器进行了减震机理分析 ,对消能支撑框架模型进行了低周反复荷载试验和振动台试验 ,编制了非线性有限元分析程序和弹塑性时程分析程序 ,并将研究结果应用于实际工程     

我国橡胶助剂工业的现状及前景

介绍了我国橡胶助剂工业的历史和现状，分析了存在的问题及发展机遇，并对我国橡胶助剂工业的发展提出建议。