物探螺旋钻机钻杆液压夹紧机构的设计计算

利用ANSYS大型有限元分析软件,对新设计的物探螺旋钻机钻杆液压夹紧机构进行了数值模拟分析计算。分析计算结果表明,当钻杆液压夹紧机构的钳体材料选择ZG310-570,所用液压马达的排量为390 mL/r时,该系统在最小驱动压力4.82 MPa、最大驱动压力7.30 MPa时才能正常工作。这种数值模拟分析为进一步改善钻杆液压夹紧机构的受力,改进机构的设计提供了依据。     

水浴法加温液氧泵

1　故障现象一次 ,我们用KL -1 5型制氧制氮车开机制氮 ,给一只容积为 40升、最高工作压力为1 4 7MPa的气瓶灌充氮气 ,当气瓶充气压力升高到一定值时不再上升。反复开泵 ,压力基本不变。液氧泵停止时 ,出口压力无明显下降。经分析判断导致气瓶压力升高到一定值时不再上升的原因是由于液氧泵被冻结所致。2　排除方法首先关闭液氧泵。拧开制冷机氢气放气阀 ,使压力下降到 1 0MPa。开大放气阀 ,使二级压力保持在 0 3 5MPa左右。调整正流空气调节阀 ,调节好中部温度。关闭液氮进液氧泵阀和气氮出液氧泵阀。戴棉布手套 ,拆开液氮进口接头、…     

滚动转子式压缩机传热模拟

就滚动转子式压缩机的传热特性进行了分析。把压缩机分为15块，视摩擦损失和电机发热为内热源，考虑润滑油流动在传热过程中的影响，应用集中参数法对每块进行了能量分析，建立了传热数学模型并进行了计算。     

取水泵站调速运行的节能效果比较

对取水泵站水泵部分调速运行和全部调速运行在水源枯水位、常水位及洪水位时的节能效果进行了分析比较 ,并给出了结论     

浅埋地下建筑风冷热泵空调系统传热模型与试验研究

本文在浅埋地下建筑风冷热泵空调系统围护结构传热动态模拟的基础上，通过对南京市太园地下旅社围护结构传热的实时测试，验证动态传热模型及计算机模拟方法的可行性和正确性，为浅埋地下建筑风冷热泵空调系统的装机容量、节能指标和设计计算提供一定的理论依据。     

CSP连铸机大型液压缸的故障分析与改进

论述引进德国SMS连铸机大包托臂液压缸存在的寿命短问题，分析设计制造缺陷．通过增大缸头密封支持面、(φ600)内圆孔倒角、再增加一道软支撑环、缸头导向部分开润滑槽、改进球杆的润滑流道、柱塞杆整体淬火等措施，消除了原来的问题．同时分析了此项改进的技术经济效果．     

屏蔽电泵运行中存在问题的分析与改进

对屏蔽电泵在非设计流量下工作存在较大的轴向力不平衡，造成前端轴承磨损严重进行了分析。在不降低效率的情况下，在屏蔽电泵的泵头加入平衡盘使轴向力得到平衡，并取得了满意的效果。     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

The extracorporeal circuit: Materials,problems, and solutions

The extracorporeal circuit in hemodialysis and related therapies facilitates passage of blood to and from the patient and forms an integral link with the safety systems of the proportioning system. Historically, elements of the circuit were subject to problems such as spallation introduced by the blood pump and plasticizer from the tubing sets leaching into the blood. Many of these early issues have been largely resolved, although there is still potential for further improvement and innovation. The introduction of such improvements and innovations into clinical practice is critically dependent upon their cost and benefit to patient and renal unit staff.     

混凝土输送泵的常见故障及排除

介绍了混凝土输送泵的常见故障，阐述了混凝土输送泵墙管的排除方法，指出只有认真分析造成故障的各种原因，才能按照先外后内、先易后难的原则进行故障处理。