基于PLC电液比例控制的液力测功装置开发及其应用

本文介绍一种齿轮动态加载试验规范及技术要求，论述了运用电液比例控制技术所设计的液压加载系统原理及其使用效果，并简述由此构造的液力测功装置的原理与应用前景。     

Preliminary Assessment of Contaminants in Soft Sediments of the Detroit River

Soft sediments from the Detroit River were analyzed for the USEPA priority pollutants to generally characterize contaminant distribution. Forty-three were detected. Highest heavy metal concentrations were found in the Trenton Channel and immediately downstream of Grosse Ile. They ranged from an area mean (N = 2) of 0.19 mg/kg mercury to 338.7 mg/kg zinc (dry weight). Polynuclear aromatic hydrocarbons ranged from 0.1 mg/kg to 38.8 mg/kg (mean, N = 2) with the highest levels near Grosse Ile. PCBs ranged from 0.015 mg/kg to 1.7 mg/kg (mean, N = 2). Organochlorine pesticides were not detected except for a trace of heptachlor in one sample. Sediment contamination in the Detroit River is widespread with higher concentrations on the U.S. side downstream of the Rouge River and in the Trenton Channel. The significance of these in-place pollutants to biota and as a source to Lake Erie is still unknown.     

利用液晶光阀实现的光学形态变换

提出了基于液晶光阀的光学二值图像领域处理器，利用它完成了扩、蚀和边缘检测等形态变换操作，并给出了实验结果。     

攀钢“501”滑动水口液压驱动系统的研制

介绍了为攀钢“５０１”滑动水口研制的专用液压驱动系统，对该系统的工作原理，性能特点，主要元件（设备）的选择原则等作了较为详细的说明介绍。     

高能气体压裂联作技术进展

国内高能气体压裂增产技术已经由单一的有壳弹、无壳弹、液体药、可控脉冲等高能气体压裂,进展到与射孔、水力压裂、酸化、化学解堵等技术相联作的综合压裂阶段。分别对高能气体压裂与射孔、水力压裂和化学解堵等联作技术的基本原理、现场试验、作业效果等进行了介绍。高能气体压裂已发展成一种基本成熟的、综合性油气田增产改造新技术。     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

秦山核电厂蒸汽发生器水位控制试验

简要介绍了蒸汽发生器水位控制系统的运行方式和试验方法。试验项目包括旁通阀控制试验、主给水阀控制试验和旁通阀与主给水阀的切换试验。文中给出了试验结果,即在液位扰动和核动率扰动时,蒸汽发生器液位的变化过程。经过两个月的运行和瞬态试验,证明蒸汽发生器水位控制系统满足设计要求。     

新型无杆水力采油装置研制与应用

针对中原油田中后期开发存在的液面降低、泵挂加深使得抽油机载荷增加、冲程损失增大、杆管偏磨严重等问题,研制了新型无杆水力采油装置。该装置采用球阀换向,冲程长、冲次低。现场试验时SC38—74—4.8型无杆水力采油装置与常规管式抽油泵联用,下泵深度1650m,冲程4.8m,冲次2.7min-1,日注水量72m3,产出液60m3。结果表明,新型无杆水力采油装置延长了抽油泵的使用寿命,彻底根除了杆管偏磨,采用球阀换向,对动力液要求较低,日常维护简单。     

盘山闸扩建工程水工模型试验研究

辽河干流堤防安全泄量为5000m3/s,盘锦城市防洪工程竣工后,其安全泄量为6800m3/s。而盘山闸的设计泄流能力仅为3000m3/s。通过本模型试验研究进一步确定扩建工程方案的合理性。     

水力脉冲式钻井工具的研制与应用

水力脉冲式钻井是利用特定的工具使钻井管柱中的连续流转变为脉冲射流,从而改变井底流场的压力状况,进而提高机械钻速的一种钻井新工艺。在分析水力脉冲产生机理的基础上,探讨了基于瞬变流理论的机械阻断式水力脉冲破岩机理,介绍了SLPMC机械阻断式水力脉冲工具的工作原理及结构特点,简单叙述了该工具在胜利油田进行的2口井的现场试验情况。该钻井工具对于提高机械钻速和降低钻井成本具有一定的积极意义。