储层地质模型与油藏模拟模型之间的桥梁——一种有效的模型粗化方法

针对油田储层地质模型向油藏模拟模型转化中粗化软件存在的问题 ,提出了一种实用的网格粗化方法 ,并编制了模型粗化程序 ,还给出了检验粗化结果的 5个要点。应用效果表明 ,该粗化方法是有效的 ,它较好地解决了地质模型与油藏模型之间的转化问题     

简述近期我国硬质合金工业发展趋势

介绍了2005年我国硬质合金行业基本情况,分析了近期行业发展趋势。     

CAL delivery selection criteria and authoring systems

Abstract  In the past, authoring systems have been used to generate computer-assisted learning materials that have often followed the rather restrictive programmed learning format. A number of innovative ways of using recently developed systems to develop CAL packages that include a wider range of learning activities (access to data bases, simulations, interactive video, etc.) are described. Analogous to the concept of a media selection model, a computer delivery mode selection model is presented as an aid to decision making for designers. This increase in flexibility should broaden the applicability of computerassisted learning (CAL) to a wider range of educational objectives and raise the level of the cognitive emphasis in learning packages, as well as facilitate the implementation of visually appealing materials. The paper also implies a standard of acceptability for authoring systems.     

Enhanced Oil Recovery: The Synthesis of Anthraquinone [1, 2-C] Alkylisoxazole

Anthraquinone [1, 2-C] methylisoxazole is synthesized from 2-ethylanthraquinone through nitration and treating with oleum. The different methods of 2-ethylanthraquinone nitrated were discussed. The optimum conditions were determined. The structure of the product was confirmed by MS and ¹H NMR.     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

机械合金化Fe─B非晶合金及纳米合金的形成

在适当条件下机械合金化可以形成急冷法难以得到的单一Ｆｅ６０Ｂ４０非晶合金，而在其他成分内形成亚稳纳米合金。在众多的球磨条件中，球磨机的转速是控制合金化的重要因素，空气中的氧对小颗粒界面产生了强烈的污染作用，从而抑制了原子的相互扩散，难以形成单一的非晶产物。不同球磨条件下的产物含有的非晶相的晶化温度比单一非晶相合金的晶化温度稍高，并且与球磨条件以及成分的关系不大。     

基于山区地质灾害危险性分区的建设用地适宜性评价

地质灾害是建设用地选址时考虑的关键因素之一,也是危险性区划的主要参考要素,其直接或间接危害到人类安全并给社会和经济建设造成重大损失。为了降低建设用地规划中地质灾害的影响,应将地质灾害危险性分区考虑到建设用地适宜性评价当中。以干旱河谷山区丹巴县为研究区,运用确定系数和逻辑回归相结合的方法,构建地质灾害危险性评价体系对该区进行地质灾害危险性分区。选择安全因子、自然因子、社会因子和生态因子共同构成建设用地适宜性评价指标体系,利用层次分析法对研究区进行建设用地适宜性评价。结果表明:(1)对丹巴县进行危险性分区,极高危险区217.20km2,高危险区744.95km2,中度危险区1352.44km2,低度危险区1295.08km2以及极低危险区875.32km2。(2)丹巴县建设用地最适宜区面积为115.72km2,占县域总面积的2.57%,适宜建设的土地少且多集中在小金川、革什扎河、东谷河和大渡河沿岸河谷地区。较适宜区、基本适宜区、较不适宜区和禁止建设区面积分别为683.47km2、623.21km2、590.66km2、2494.21km2。(3)已建成的城镇空间中38.50%和37.62%分布在最适宜区和较适宜区,整体分布状况良好。有5.85%的城镇空间建设在较不适宜区,2.67%在禁止建设区,存在生态安全风险,该区域应加强灾害预警与防灾减灾工作,有条件地适度搬迁。     

220kV线路工程滑坡地质灾害危险性分析

文章介绍了喜德县红莫升压站-鲁基升压站220kV线路工程滑坡地质灾害危险性现状评估和预测评估,确定了评估区内滑坡地质灾害对工程的影响,以及工程建设加剧已有滑坡地质灾害的危险性和自身可能遭受已存在滑坡地质灾害的危险性。据此评估结果,为工程在建设过程中提出了具体的防治处理措施建议。     

电力工程中的地质灾害危险性评估

我国幅员辽阔,地质环境条件多样且复杂,导致了地质灾害发育强烈,种类繁多、危害较大。地质灾害与工程建设活动密切相关,既相互作用,相互依存,又相互影响[1]。电力工程项目遍布全国,特别是输电线路大多为人烟稀少的山区分布,线路长,跨越的地质地貌区域复杂,存在的地质灾害多种多样,或多或少面临着各种地质灾害的严重威胁[2]。通过电力工程地质灾害危险性评估工作的现状及评估工作流程的介绍,进一步分析电力工程地质灾害的危险性评估工作中存在的问题并提出了相应的看法。     

Delay‐dependent passivity and passification for uncertain Markovian jump systems with time‐varying delays

This paper deals with the problems of passivity analysis and passivity‐based controller design for Markovian jump systems with both time‐varying delays and norm‐bounded parametric uncertainties. Firstly, new delay‐dependent conditions for the considered system to be passive are obtained by using a mode‐dependent Lyapunov functional and by introducing some slack variables. These conditions are expressed by means of LMIs that are easy to check. It is shown through a numerical example that the obtained passivity conditions are less conservative than the existing ones in the literature. Secondly, the passification problem is investigated. On the basis of the obtained passivity conditions, dynamic output‐feedback controllers are designed, which ensure that the resulting closed‐loop system is passive. The effectiveness of the proposed design method is demonstrated by a numerical example. Copyright © 2011 John Wiley & Sons, Ltd.