An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

Swollen behavior of crosslinked network hydrogels based on poly(vinyl alcohol) and polydimethylsiloxane

Poly(vinyl alcohol) (PVA) was dissolved in the water to make a 10 wt % aqueous solution, and polydimethylsiloxane (PDMS) was mixed with 1 wt % 2,2‐dimethyl‐2‐phenylacetophenone (DMPAP) and 0.5 mol % methylenebisacrylamide (MBAAm) in isopropyl alcohol. This mixture was added to a PVA aqueous solution and heated at 90°C for 7 h. Various crosslinked networks were prepared at different molar ratios of PVA/PDMS (1:1, 1:3, and 3:1). The characterization of PVA/PDMS crosslinked networks was determined by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), a universal testing machine (UTM), and the equilibrium water content (EWC). The DSC melting endotherms showed, at 219.49°C, a sharp endothermic peak of PVA, and PVA/PDMS crosslinked networks had melting peaks close to this point. The value of EWC increased with the content of PVA in the crosslinked networks, simultaneously depending on the temperature. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 957–964, 2002     

疏水型高强度水凝胶的合成与性能

以丙烯酰胺和疏水单体为原料 ,过硫酸钾 -硫酸亚铁为引发剂 ,采用溶液聚合法合成了疏水型高强度水凝胶。研究了单体组成、单体浓度、引发剂用量、交联剂用量、反应温度等因素对产物性能的影响。对比分析了疏水型水凝胶的吸水倍数、吸水速率和强度。疏水型水凝胶的强度大于常规高吸水性树脂 ,最长吸水时间长 ,吸水速度平缓。对疏水型高强度水凝胶强度进行了统计回归分析 ,对吸水速率和最长吸水时间进行了分析描述。     

Temperature-dependent transparency of poly(HPMA-co-DMA) hydrogels: effect of synthesis parameters

The acrylic comonomers hydroxypropyl methacrylate (HPMA) and N,N-dimethylaminoethyl methacrylate (DMA) have been used in several earlier studies to produce pH-responsive hydrogels. However, these same monomers can also be used to prepare hydrogels that are highly responsive to temperature. One manifestation of this temperature sensitivity is a sharp decrease in hydrogel optical transparency that occurs when the temperature exceeds a critical transition value. For example, a hydrogel that exhibits a swelling transition at the physiological pH value of 7.4 has a transition temperature of about 45 °C when the environmental salt concentration is 0.15 M. The value of the transparency transition temperature is shown to depend on hydrogel synthesis parameters such as comonomer mole ratio, crosslinker mole ratio, and even initiator concentration. By reducing the mole ratio of the crosslinker tetraethylene glycol dimethacrylate (TEGDMA), the transition temperature can be lowered by as much as 15 °C. Environmental salt concentration and solvent polarity are also shown to influence the transition temperature.     

Synthesis and characterization of biodegradable hydrogels based on photopolymerizable acrylate-terminated CL-PEG-CL macromers with supramolecular assemblies of α-cyclodextrins

A series of polypseudorotaxanes were synthesized from α-cyclodextrins (α-CDs) threaded onto photopolymerizable CL-PEG-CL oligomers bearing acrylate terminals. The corresponding supramolecular structured hydrogels were prepared from these polypseudorotaxanes in a mixed solvent of H₂O and DMSO via in situ photopolymerization under UV irradiation. The structure and properties of the gels were characterized by FTIR, TGA-DTG and WAXD. The results show that α-CDs are threaded and immobilized onto the network chains of the hydrogel with crosslinking junctions as stoppers topologically, and the feed molar ratio of α-CDs to the macromers affects the hydrogel structure and the water distribution in the hydrogel. These supramolecular structured hydrogels may be good candidates for biomaterial applications.     

Hydrogels from glycidyl derivatives of poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) was modified with phthalic anhydride to obtain half esters with carboxylic acid groups, which made the reaction with epichlorohydrin easier. The oxirane ring underwent a further crosslinking that led to crosslinked polymers with polar groups capable of interacting strongly with water and therefore with properties of hydrogels. The curing kinetics of the crosslinking were studied by differential scanning calorimetry, and the dependence of the activation energy on conversion degree was studied by isoconversional kinetic analysis. Water absorption was determined gravimetrically as a function of time at room temperature. The swelling behavior of these hydrogels was related to the degree of crosslinking. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 693–698, 2003     

可注射水凝胶在组织工程中应用进展

组织工程采用可注射原位形成水凝胶,与预成型支架相比具有特定的优势：能填充任意形状的缺损,并在很大程度上降低植入对机体组织的侵入性,且能与各种治疗药物混合。本文介绍了可注射凝胶形成过程及几种水凝胶系统．并以实例说明可注射水凝胶在组织工程中的应用。     

Comparative Study of Ultrasonication-Induced and Naturally Self-Assembled Silk Fibroin-Wool Keratin Hydrogel Biomaterials

This study reports the formation of biocompatible hydrogels using protein polymers from natural silk cocoon fibroins and sheep wool keratins. Silk fibroin protein contains β-sheet secondary structures, allowing for the formation of physical cross-linkers in the hydrogels. Comparative studies were performed on two groups of samples. In the first group, ultrasonication was used to induce a quick gelation of a protein aqueous solution, enhancing the ability of Bombyx mori silk fibroin chains to quickly entrap the wool keratin protein molecules homogenously. In the second group, silk/keratin mixtures were left at room temperature for days, resulting in naturally-assembled gelled solutions. It was found that silk/wool blended solutions can form hydrogels at different mixing ratios, with perfectly interconnected gel structure when the wool content was less than 30 weight percent (wt %) for the first group (ultrasonication), and 10 wt % for the second group (natural gel). Differential scanning calorimetry (DSC) and temperature modulated DSC (TMDSC) were used to confirm that the fibroin/keratin hydrogel system was well-blended without phase separation. Fourier transform infrared spectroscopy (FTIR) was used to investigate the secondary structures of blended protein gels. It was found that intermolecular β-sheet contents significantly increase as the system contains more silk for both groups of samples, resulting in stable crystalline cross-linkers in the blended hydrogel structures. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the samples’ characteristic morphology on both micro- and nanoscales, which showed that ultrasonic waves can significantly enhance the cross-linker formation and avoid phase separation between silk and keratin molecules in the blended systems. With the ability to form cross-linkages non-chemically, these silk/wool hydrogels may be economically useful for various biomedical applications, thanks to the good biocompatibility of protein molecules and the various characteristics of hydrogel systems.     

聚丙烯酸/锂藻土纳米复合水凝胶对亚甲基蓝吸附性能的研究

研究了聚丙烯酸/锂藻土纳米复合水凝胶对染料亚甲基蓝的吸附性能,考察了不同吸附条件,包括凝胶用量、染料浓度、吸附时间及溶液p H条件等对水凝胶吸附效果的影响。实验结果表明,水凝胶对亚甲基蓝的吸附过程在30 min内即能达到平衡,吸附速度快;最大吸附容量高达1 192.9 mg/g,是普通吸附剂吸附容量的几十倍,吸附效果好;凝胶的吸附等温线拟合结果符合Freundlich模型,动力学拟合结果显示,凝胶对亚甲基蓝的吸附过程符合二级动力学模型。     

Development,In Vitro and In Vivo Evaluation of pH Responsive β-CD-Comethacrylic Acid-Crosslinked Polymeric Microparticulate System for Solubility Enhancement of Rosuvastatin Calcium

Current research work was conducted for enhancing solubility of rosuvastatin calcium. A highly stable, biocompatible, and nontoxic β-cyclodextrin-g-poly(methacrylic acid) graft polymeric network was developed. Formulations proved entrapment efficacy (%) in between 82.30?±?0.25 and 89.00?±?0.25 and gel fraction between 90.34?±?1.012 and 95.25?±?1.331. Formulation HM2 had shown optimum swelling and drug release, i.e., 85.74% at pH 6.8. The best-fit model was first-order kinetics with anomalous diffusion as release mechanism. Likewise, solubility enhancement, i.e., 9.59-folds was determined at pH 6.8. It was concluded that hydrogel microparticles are the promising tools for improving solubility and bioavailability of hydrophobic drugs.