塔河油田酸化压裂工艺现状及研究

塔河油田奥陶系碳酸盐岩储层具有埋藏深、地温高、低渗透,非均质性强的特点。采用胶凝酸体系和变粘酸体系,根据储层类型不同,采用酸化压裂技术沟通裂缝,提高导流能力,达到增产的目的。酸压施工成功率95%,有效率60%,增产的原油占油田日产量40%,为油田增加探明储量1×108t。从而成为油田开发、稳产和增产的主要措施之一。     

Study on the anodic film formation process of AZ91D magnesium alloy

The formation of anodic film of AZ91D magnesium alloy has been investigated by means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, anodic polarization curve, current-time transients and SEM technique. The results show that, under our experimental conditions, the formation of AZ91D anodic film follows the mechanism of 3D nucleation with diffusion controlled growth. With the increase of applied anodizing potential, the nucleation type of anodic film changes from progressive to instantaneous. The results also show that the initially formed anodized film is threadlike and porous, and high potential is essential for the formation of good anodic film with excellent properties.     

间羟基苯磺酸合成工艺研究

系统研究了以间氨基苯磺酸为原料，通过重氮化，然后在酸性条件下水解制得间羟基苯磺酸的合成工艺。考察了重氨化过程中的NaNO2用量、H2SO4用量、重氮化温度、重氮化反应时间和水解过程中水解温度、水解用稀硫酸浓度及水解时间对间羟基苯磺酸收率的影响。实验表明，最佳工艺条件为：NaNO2与间氨基苯磺酸的摩尔比为1．05：1，重簧L化用H2SO4与间氨基苯磺酸的摩尔比为2．0：1，重氮化温度9℃，重氮化反应时间2小时，水解温度80℃．水解用稀硫酸浓度10％，水解时间川、时，间羟基苯磺酸收率90.95％：     

竹/玻璃钢复合建筑材料的研制及性能分析

竹/玻璃钢复合建筑材料是一种新型三维复合材料.本文对其进行了结构设计的研究,并通过大量试验对其力学性能进行了分析,结果证明竹/玻璃钢复合建筑材料确实是一种重量轻、性能好、工艺简单、价格便宜的材料,具有广阔的应用前景.     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

Ionic liquid mediated nano-composite polymer gel electrolyte for rechargeable battery application

ABSTRACT

Nano-composite polymer gel electrolytes (NPGEs) based on polymer poly(vinylidene fluoride-co-hexafluoropropylene) PVdF-HFP, ionic liquid, 1-butyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide BMIMTFSI, Li-salt along with the addition of SiO₂ nanoparticles have been synthesized and characterized by various techniques. Prepared NPGEs show high room temperature ionic conductivity (~10^?3 S/cm) and have a wide electrochemical window (ECW) (~3.3–3.5 V). The galvanostatic charge/discharge profile was studied by sandwiching best performing NPGEs between a LiFePO₄ cathode and lithium metal anode. The specific discharge capacity of the cell (Li/NPGE/LiFePO₄) room temperature at 0.1C rate is found to be 138 mAh/g.     

炼油与化工一体化 有效利用原油资源--从多种化学反应剖析多产石化产品途径

介绍了炼油过程中多产石油化工原料的有关工艺技术,从化学结构转化角度阐明了理论依据.由于原油特别是重油中丰富的烷基碳、环烷碳和芳碳资源均能通过一定途径转化为低碳烯碳以及芳碳,其潜在资源超过单纯依靠石脑油所能提供的数量,因而在经济合理和技术可行的原则下尽量提高其转化率成为当前炼油-化工一体化的研究热点.     

Viscosity of compressed cold lake bitumen

Viscosity data over a temperature range of 37-115°C and a pressure range of 0-10 MPa gauge are presented for a Cold Lake bitumen sample. These data show that the compression of Cold Lake bitumen results in a significant increase in its viscosity. Results are compared with those from a similar study on an Athabasca bitumen sample. Also presented are two correlations for the effects of pressure and temperature on the viscosity of Cold Lake bitumen.     

火焰原子吸收光谱法测定电缆绝缘护套中的铅

提出了用空气—乙炔原子吸收光谱法测定电缆绝缘护套中的铅含量。铅在0.00~11.00μg.ml-1(r=0.9991)范围内有良好的线性关系。本法的RSD≤3.17%,回收率在97.2%~103.2%之间。     

湿法磷酸过滤设备和管道结垢原因分析及控制研究

分析湿法磷酸过滤设备与管道结垢的主要原因是氟硅酸钾、钠盐因磷酸液相温度下降而沉积下来。提出采用添加剂,抑制或提前析出氟硅酸钾、钠盐,同时进行了5种添加剂的实验室研究:均有较好的阻垢效果,但最终选择添加剂E(氟硅酸),阻垢率可达70%以上,添加量以0.5g/100g磷矿为宜。