数据驱动的冷却水塔建模与节能优化操作

针对冷却水塔的节能操作给出了一种数据驱动的建模与优化方法。首先,基于冷却水塔实际运行数据,应用非负绞杀变量选择方法给出一个自适应模型用于描述冷却水塔过程,该模型对于冷却水塔出口水温具有良好的预测精度。根据变量选择结果,分析了外界空气温度与湿度对冷却能力的影响。然后,提出了基于模型的冷却水塔风机的优化操作策略,并进行实验将之应用于冷却水塔的操作。研究结果显示,基于模型的优化操作具有较大的节能空间。     

中央空调的水处理

本文扼要介绍了中央空调循环冷却水和冷冻水系统中常见的问题及其原因,并对冷却水和冷冻水的处理程序作了初步的阐述.     

The effect of cooling rate on the impact performance and dynamic mechanical properties of rotationally molded metallocene catalyzed linear low density polyethylene

This article examines changes to the morphology of rotationally molded metallocene catalyzed linear low density polyethylene brought about by varying the cooling rate during processing. These changes in morphology lead to variations in the impact performance, which is reflected in the dynamic mechanical characteristics of the materials. Various analytical techniques are used in an attempt to explain the differences in impact behavior. Slow cooling is shown to result in high crystallinity, and in the formation of large spherulites, which in turn is detrimental to the impact performance of the material, particularly at low temperatures. The high crystallinity corresponds with a shift in the β transition of the material to a higher temperature, and is shown to result in a higher brittle–ductile transition. A case study was also carried out on samples from a finished part provided by an industrial molder, one section of which failed in a brittle manner when impact tested while the other failed in a ductile manner. Microscopy results showed that the brittle material had large spherulites at the inside surface, while the ductile material showed incipient degradation at this surface, which has previously been shown to be of benefit to impact strength in rotationally molded parts. Dynamic mechanical studies again showed a β transition at a higher temperature in the brittle samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1963–1971, 2006     

中央空调制冷机的化学清洗

阐述了中央空调制冷机结垢的类型及其产生的原因和危害,分析了中央空调制冷机的冷媒水系统、冷却水系统的化学清洗技术和操作方法.     

硅整流元件纯水冷却系统换热设备的化学清洗

介绍了硅整流元件的纯水冷却系统换热设备化学清洗中药剂的评定筛选原则。质量标准，清洗工艺等。并对其清洗效果加以评定。     

Thermodynamic performance of O2/CO2 gas turbine cycle with chemical recuperation by CO2-reforming of methane

This paper proposes a novel power cycle system composed of chemical recuperative cycle with CO₂–NG (natural gas) reforming and an ammonia absorption refrigeration cycle. In which, the heat is recovered from the turbine exhaust to drive CO₂–NG reformer firstly, and then lower temperature heat from the turbine exhaust is provided with the ammonia absorption refrigeration system to generate chilled media, which is used to cool the turbine inlet gas except export. In this paper, a detailed thermodynamic analysis is carried out to reveal the performance of the proposed cycle and the influence of key parameters on performance is discussed. Based on 1 kg s⁻¹ of methane feedstock and the turbine inlet temperature of 1573 K, the simulation results shown that the optimized net power generation efficiency of the cycle rises up to 49.6% on the low-heating value and the exergy efficiency 47.9%, the new cycle system reached the net electric-power production 24.799 MW, the export chilled load 0.609 MW and 2.743 kg s⁻¹ liquid CO₂ was captured, achieved the goal of CO₂ and NO_x zero-emission.     

Ozone Treatment of Surface Water to Provide High Quality Cooling Water and Process Water

The characteristic feature of this cooling tower water treatment is the intermittent addition of ozone for several days.     

外加电流阴极保护在海水冷却槽中的应用

论述了金属的电化学腐蚀和外加电流阴极保护原理。说明对以海水为介质的冷却、冷凝设备,采用外加电流阴极保护是防止设备腐蚀的有效方法。举例说明了应用效果。     

循环冷却水零排污运行方案的研究

对循环冷却水系统零排污的技术可行性、经济性等进行了讨论，并针对大庆炼化公司循环冷却水系统零排污方案的实施加以详细描述，对实施过程中存在的问题予以了详细说明。     

冶钢宾馆中央空调的化学清洗

通过对中央空调冷冻水、冷却水两个系统结垢原因的分析，简单论述了化学清洗的机理、方式方法，以及清洗在维护中央空调系统正常运行中的重要性。