铝冷轧制油应用和生产工艺研究

通过对铝材冷轧工艺的分析。研究，以退火工艺中的斑痕为重点，提出采用加氢处理，异构化精制的石蜡基航空煤油组分为基础油，采用不同复合添加剂生产的通用铝冷轧制油完全可以满足客户要求。     

SHAPE GENERALIZED ISOTHERMAL EFFECTIVENESS FACTOR FOR FIRST-ORDER KINETICS

A generalized effectiveness factor equation (Eq. (32)), in terms of modified Bessel functions, is derived for a catalyst pellet of arbitrary shape. The derivation is based on utilizing an appropriate one-dimensional approximation for the Laplacian in an arbitrary shaped body subjected to a uniform external concentration field. The comparison of the result with the available expressions for various geometries is highly satisfactory. It unifies the expressions for the three fundamental shapes, viz., infinite slab, infinite cylinder and sphere, and also compares very well with the exact solutions for finite shapes over the entire range of the Thiele modulus.     

基于分层加权的多边形图形匹配

提出了一种适用凸凹多边形匹配的分层加权测度方法，在此方法中，对凹多边形、首先进行基于提取凸多边形的模式分解，对凹多边形添加辅助线，形成新的外接凸多边形、通过依次抽取外接凸多边形，将凹多边形表达为仅由凸多边形组成的多层拓扑结构，然后，利用预先定义的互为模板的相似度量准则和分层加权测度模型，计算得到多边形的相似度系数，从而实现凹多边形的匹配和检索。     

某双曲拱坝的体型调整

在某砌石双曲拱坝施工中,由于施工放样的错误,使已建拱坝坝轴线偏离了设计坝轴线,为此需要重新调整拱坝体型。根据已建成的拱冠梁上游面曲线重新确定新的曲线方程,待建部分用新的曲线方程延伸,经空间有限元的应力变形分析,认为调整后的拱坝体型可行。现已付予实施。     

NiTi形状记忆薄膜的显微结构和力学性能

NiTi形状记忆合金薄膜具有形状记忆效应，极有希望用于制造高技术领域微电子机械系统中的微型激发器。NiTi形状记忆合金薄膜在制备和使用过程中需要高品质（衬）底材。本文利用高分辨电子显微学和高分辨分析电子显微学详细研究了硅底材NiTi形状记忆合金薄膜的NiTi／Si和NiTi／SiO2微结构体系，包括薄膜精细结构和界面反应。也研究了其显微结构和力学性能的关系。特别给出了NiTi形状记忆合金薄膜产生疲劳过程的微观过程的起因，通过高达十万个使用热循环前后样品显微结构变化的比较，发现纳米尺度上的TiNi3新相的形成导致疲劳过程的发生。如何抑制TiNi3新相形成的研究正在进行之中，这将为进一步提高NiTi形状记忆合金的使用寿命指出方向。     

Original Finger Image Extraction by Morphological Technique and Finger Image Comparisons for Persons' Identification

This research uses the object extracting technique to extract the index, middle and ring fingers from the hand images. The algorithm developed in this research can find the precise locations of the different fingers' fingertips and the finger-to-finger-valleys. After finding the positions of the fingertips and finger-valleys, the index, middle and ring fingers can be extracted from the hand images by using morphological technique. The extracted index, middle and ring fingers contain many useful geometry features. One can use these features to do the person's identification. The orientations of the index, middle and ring fingers are found in this research. Image rotating, image shifting, and image interpolating techniques are used to align different persons' index, middle and ring fingers. Image subtraction is used to exam the difference of two index, middle and ring finger images. In this research so far only use the index, middle and the ring fingers as the features to identify different persons. ^★This work was supported by National Science Council under grant NSC 93-2213-E-212-011.     

Adhesive element modelling and weighted static shape control of composite plates with piezoelectric actuator patches

A novel finite element model is presented for static and dynamic analysis of composite plates integrated with a laminated piezoelectric layer, a host laminated composite plate and an adhesive layer between them. A new adhesive element is developed which includes both peel and shear effects in the adhesive layer based on first‐order shear deformation plate theory. The thin adhesive layer between the piezoelectric layer and the host plate is modelled by assuming that it carries constant shear and peel strains throughout its thickness. In addition, a weighted static shape control scheme for finding the optimal voltage distribution for static shape control is given. By selecting different weighting matrices, a variety of items such as displacements, slopes, curvatures, strains and even generalized forces, can be included in finding the optimal actuating voltage for static shape control. The present model is validated by comparing with those results available in the literature. The numerical results show that the weighted linear least method can give a satisfactory voltage distribution to best match the desired shape. Copyright © 2004 John Wiley & Sons, Ltd.     

Terminal velocity of non-spherical particles falling through a Carreau model liquid

A procedure has been proposed for the estimation of the terminal falling velocity of non-spherical particles moving in a Carreau model fluid in the transition flow region. The procedure is based on a modification of the relationship formerly developed for the fall of spherical particles including the particle dynamic shape factor. The suitability of the proposed procedure has been confirmed by good agreement between experimental and calculated terminal falling velocity data. In the experiments, the terminal falling velocity of short cylinders and rectangular prisms in polymer solutions of different measure of shear thinning and elasticity has been measured.     

择形催化合成2,6-DMN的研究进展

介绍了2,6-二甲基萘(2,6-DMN)的制备方法,详细论述了萘、甲基萘在分子筛催化剂上择形催化合成2,6-DMN的研究进展,提出了择形催化合成2,6-DMN的研究方向。